KIDZTECH TOYS 8408318-24GTX 1/10 R/C Jet Panther User Manual OTM 8408318 24GTX
KIDZTECH TOYS MANUFACTURING LTD 1/10 R/C Jet Panther OTM 8408318 24GTX
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3935290 |
| Application ID | vI0PUvNOCNoj+wqBUhUwqQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 190.6kB (2382525 bits) |
| Date Submitted | 2018-07-23 00:00:00 |
| Date Available | 2018-07-24 00:00:00 |
| Creation Date | 2018-07-16 17:40:59 |
| Producing Software | GPL Ghostscript 9.05 |
| Document Lastmod | 2018-07-16 17:40:59 |
| Document Title | OTM-8408318-24GTX User Manual |
| Document Creator | PDFCreator Version 1.4.1 |
| Document Author: | wilsonloke |
NO.: 84083 PRO . S Y S TE M Contents -RC Vehicle (Vehicle) x 1 -RC Transmitter (Transmitter ) x 1 -Instruction Manual x 1 -9.6V Rechargeable Battery Pack x 1 -Charger x 1 -9V Battery x 1 9V 40 9.6V RC Transmitter x 1 Battery Precaution 1. The 9.6V Lithium Rechargeable Battery Pack must be charged before use by utilizing the battery charger which included 2. Do not overcharge the battery pack. Do not charge for more than 6 hours 3. Do not charge the battery pack if it shows leakage, corrosion, or has loose or exposed wires or other damage 4. Do not cover the battery pack with any sort of materials while charging 5. Do not touch the battery pack when it is hot. Wait until the battery pack cools before installing it in the Vehicle and before recharging 6. Do not dispose of the battery in fire 7. Do not dismantle the battery or charger, and do not cut the battery or charger cables 8. The battery pack will be warm after charging, and hot after use in a vehicle 9. The supply terminals are not to be short-circuited 10. Rechargeable batteries are to be removed from the toy before being charged 11. Rechargeable batteries are only to be charged by adult. 1 X 9V Battery For Transmitter (Included) 9.6V 1300mAh For Vehicle (Included) ADAPTER (Included) RC Vehicle x 1 12. Battery replacement must be only made by adults 13. The transformer (charger) is not a toy 14. Charge only type (1300mAh Max.) rechargeable battery packs. Other types of batteries may burst causing injury to persons and damage. This power unit is intended to be correctly orientated in a vertical or floor mount position. This charger is intended to be used for charging 9.6V lithium rechargeable battery pack with capacity 1300mAh Max. It cannot be used for charging non-rechargeable batteries. Regular examination of battery charger for any damage to their cord, plug, enclosure and other parts, and that, in the event of such damage, it must not be used with the charger or battery pack charge until such damage has been repaired. Note that the 9V battery is non-rechargeable and is not to be recharged. Only batteries of the same or equivalent type as recommended are to be used. It will need replacement when transmission is poor. 15. Exhausted batteries are to be removed from the product. Charging the Rechargeable Battery Pack for the Vehicle: Battery Installation 1. 2. 3. 4. 5. For Vehicle (Fig. 1 and Fig. 2) Switch OFF the power Unscrew the screw on the battery cover Open the battery cover Install 9.6V battery pack with correct polarities (+/-) as shown inside the battery compartment Close the battery cover Tighten the screw on the battery cover Fig. 2 Vehicle Connect the 9.6V lithium rechargeable battery pack to the battery charger Plug the charger into the standard AC socket The charging time for a full charge is about 3 hours When charging is completed, unplug the charger from the AC socket Disconnect the rechargeable battery pack form the battery charger For Transmitter (Fig. 3 and Fig. 4) Switch OFF the power Unscrew the screw on the battery cover Open the battery cover Install 1 new 9V battery with correct polarity (+/-) as shown inside the battery compartment Close the battery cover Fig. 4 Tighten the screw on the battery cover ON/OFF (At Rear) Battery Compartment Accelerator Trigger Steering Wheel 9V Battery ON/OFF 9.6V LED Battery Indicator Direction Adjustment Vehicle - Battery Installation Fig. 1 How To Bind 84083 84086 1. Turn on the Vehicle. 2. Keep pulling the trigger of the Transmitter forward then turn the Transmitter on. Do not release the trigger until the binding process completed. 3. The LED light of the Transmitter will keep flashing for the binding process, which is within 8 seconds. Do not turn off any buttons while in progress, otherwise, the process will be terminated. 4. After the wheels of the Vehicle turn left and right and the LED light of the Transmitter stops flashing, the binding process completed for playing. 5. If it cannot complete within 8 seconds, please turn off both Vehicle and Transmitter and re-start the binding process. 6. When the binding process is done, whenever switching the Vehicle and Transmitter on and off, it searches for the code that it memorized, and will only lock on to the Transmitter signal containing that code. 7. Please turn off both Vehicle and Transmitter and re-start all binding process if changing to another 2.4GHzTransmitter for playing. How To Play 3. Use the Accelerator Trigger to drive the Vehicle Forward, Stop and Backward 1. Switch ON the Vehicle and Transmitter. Vehicle 2. Use the Steering Wheel to control the Vehicle turning left or right Turn Left Forward Stop Backward Transmitter Turn Right 4. If the vehicle does not run in straight line, adjust the Direction Adjustment on the Vehicle chassis 5. Play on smooth surface to have the optimum performance 6. Remember to switch OFF the power of the Vehicle and Transmitter after playing 7. The optimum control range is up to 40m outdoor Braking Action Keep driving forward rapidly then switch to backward for the braking action. When the trigger of the Transmitter returns to the center position, push it again for the backward action. Performance Tips 1. 2. 3. 4. Do not drive on grass, dirt, sand, dusts, carpet or go through water Do not drive in windy or rainy weather Avoid direct impact the Vehicle with obstacles Switch OFF the power when not in use to prevent damage of Vehicle and Transmitter due to leakage of electrolyte from batteries 5. Remove all batteries from the Vehicle and Transmitter when not in use for long period 6. Keep fingers, hair and loose clothing away from wheels 7. The operating range can be affected by a variety of factors a) Low Voltage of batteries in Transmitter or Vehicle b) Interference from other items that emit radio frequency signals 8. Outdoor usage is recommended in order to get optimum control range 9. Recommend to play the vehicle on a clean and smooth surface 10. Clean the battery compartment to make sure it is free from dust to prevent poor contact of batteries FCC label compliance statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna - Increase the separation between the equipment and receiver - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected - Consult the dealer or an experienced radio/TV technician for help Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the userâs authority to operate the equipment. RSS-210 Compliance Statement: This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada,. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Declaration of Conformity The product is in conformity with the requirement of EU Directive 2014/53/EC Environmental notes: The whole product also does not belong to household waste at the end of the product life. You can return it at collection points for the recycling of electronic and electronical instruments The symbol on the item, instruction manual, hangtag or packing is showing this clearly. Materials should be recycled according to their respective markings. Recycling of old devices or other re-use of materials contained therein represents an important contribution to environmental protection. Please ask at your local community for the correct collection point. Frequency band: 2406-2475MHz power transmitted: <0 dBm The packaging contain important information, Please keep for future reference. Disposal of batteries Batteries should not be disposed of in the household waste. As the consumer you are legally obliged to return batteries containing harmful substances and all other used batteries. You can hand in your old batteries at public collection points in your area or wherever batteries are sold. You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing harmful substances: Pb=Battery contains lead Cd=Battery contains cadmium Hg=Battery contains mercury KIDZTECH TOYS MANUFACTURING LTD. Room 1201,12/F, Inter-Continental Plaza, 94 Granville Road, TST East, Hong Kong. Tel: (852) 27218868 info@kidztech.net Made in China http://www.kidztech.net
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:e25f59dc-8b37-11e8-0000-f64cd2680e02 Producer : GPL Ghostscript 9.05 Keywords : () Modify Date : 2018:07:16 17:40:59+08:00 Create Date : 2018:07:16 17:40:59+08:00 Creator Tool : PDFCreator Version 1.4.1 Document ID : uuid:e25f59dc-8b37-11e8-0000-f64cd2680e02 Format : application/pdf Title : OTM-8408318-24GTX User Manual Creator : wilsonloke Description : () Author : wilsonloke Subject :EXIF Metadata provided by EXIF.tools