KIDZTECH TOYS 8449916-24GTX 1/16 RC ROCK CRUISER, RC MINI ROCK CRUISER User Manual Rock cruiser IM Page 1

Download:
Mirror Download [FCC.gov]
Document ID	2971406
Application ID	RvBRdPtPaZzh848FjyG4ZA==
Document Description	User manual_OTM-8449916-24GTX
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	204.69kB (2558679 bits)
Date Submitted	2016-04-27 00:00:00
Date Available	2016-04-28 00:00:00
Creation Date	2016-01-27 14:56:03
Producing Software	Adobe PDF library 11.00
Document Lastmod	2016-01-27 14:56:03
Document Title	Rock cruiser_IM_Page 1
Document Creator	Adobe Illustrator CC (Windows)

NO.: 84499 / 84503
age
PRO. SYSTEM
Contents
5 x AA
For Vehicle
(Not Included)
-RC Vehicle (Vehicle) x 1
-RC Transmitter (Transmitter ) x 1
40
-Instruction Manual x 1
3 x AA
For Transmitter
(Not Included)
RC Transmitter x 1
RC Vehicle x 1
Battery Precaution
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Alkaline batteries are recommended to be used
Only batteries of the same or equivalent type as recommended are to be used
Do not mix alkaline, standard or rechargeable batteries
Do not mix old and new batteries or different type of batteries
Non-rechargeable batteries are not to be charged
Rechargeable batteries for adult charging only
Rechargeable batteries are to be removed from the product before they are charged
Be sure to insert batteries with correct polarities and always follow the battery manufacturer’s instructions
Remove all batteries from the Vehicle and Transmitter when not in use
Exhausted batteries are to be removed from the product
The supply terminals are not to be short-circuited
Dispose of batteries properly. Do not dispose the batteries in fire – it may cause them to explode or leak causing injury or damage
Battery installation and removal must only be done by adult
Battery Installation
For Vehicle (Fig. 1 and Fig. 2)
1. Switch OFF the power.
2. Unscrew the screw on the battery cover.
3. Open the battery cover.
4. Install 5 new 1.5V “AA” batteries with correct polarities
(+/-) as shown inside the battery compartment.
5. Close the battery cover.
6. Tighten the screw on the battery cover.
Vehicle
For Transmitter (Fig. 3 and Fig. 4)
1. Switch OFF the power.
2. Unscrew the screw on the battery cover.
3. Open the battery cover.
4. Install 3 new 1.5V “AA” batteries with correct polarities
(+/-) as shown inside the battery compartment.
5. Close the battery cover.
6. Tighten the screw on the battery cover.
Fig. 2
Fig. 4
Direction
Adjustment
Transmitter
LED Battery
Indicator
ON/OFF
ON/OFF
Battery
Compartment
Fig. 1
Accelerator
Trigger
Vehicle - Battery Installation
Fig. 3
Steering
Wheel
Transmitter - Battery Installation
How To Bind
NO.: 84499 / 84503
1. Turn on the Vehicle.
2. Keep pulling the trigger of the Transmitter forward then turn the Transmitter on. Do not release the trigger until the binding process completed.
3. The LED light of the Transmitter will keep flashing for the binding process, which is within 8 seconds. Do not turn off any buttons while in progress, otherwise,
the process will be terminated.
4. After the wheels of the Vehicle turn left and right and the LED light of the Transmitter stops flashing, the binding process completed for playing.
5. If it cannot complete within 8 seconds, please turn off both Vehicle and Transmitter and re-start the binding process.
6. When the binding process is done, whenever switching the Vehicle and Transmitter on and off, it searches for the code that it memorized, and will only lock on to the
Transmitter signal containing that code.
7. Please turn off both Vehicle and Transmitter and re-start all binding process if changing to another 2.4GHz Transmitter for playing.
How To Play
3. Use the Accelerator Trigger to drive the Vehicle Forward, Stop and Backward
1. Switch ON the Vehicle and Transmitter.
Vehicle
2. Use the Steering Wheel to control the Vehicle turning left or right
Turn Left
Stop
Forward
Backward
Transmitter
Turn Right
Performance Tips
1.
2.
3.
4.
4. If the vehicle does not run in straight line, adjust the
Direction Adjustment on the Vehicle chassis
5. Play on smooth surface to have the optimum performance
6. Remember to switch OFF the power of the Vehicle and
Transmitter after playing
7. The optimum control range is up to 40m outdoor
Do not drive on grass, dirt, sand, dusts, carpet or go through water
Do not drive in windy or rainy weather
Avoid direct impact the Vehicle with obstacles
Switch OFF the power when not in use to prevent damage of Vehicle and Transmitter
due to leakage of electrolyte from batteries
5. Remove all batteries from the Vehicle and Transmitter when not in use for long period
6. Keep fingers, hair and loose clothing away from wheels
7. The operating range can be affected by a variety of factors
a) Low Voltage of batteries in Transmitter or Vehicle
b) Interference from other items that emit radio frequency signals
8. Outdoor usage is recommended in order to get optimum control range
9. Recommend to play the vehicle on a clean and smooth surface
10. Clean the battery compartment to make sure it is free from dust to prevent poor
contact of batteries
Cautions
1. Do not attempt to disassemble the Vehicle or Transmitter
2. Make sure the batteries are installed with correct polarities (+/-) as shown inside the
battery compartment
3. Remove the package and take out all accessories before giving the Vehicle and
Transmitter to child to play
The packaging and instruction manual contain important information. Please keep them
for future reference.
Warning! Choking Hazard. Not suitable for children under the age of 3 years due to
small parts.
We reserve the right to improve/amend specifications and colors without notice.
FCC label compliance statement:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RSS-210 Compliance Statement:
This device complies with Industry Canada Licence-exempt RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
Declaration of Conformity
The product is in conformity with the requirement of EU Directive 1999/5/EC
Environmental notes:
The whole product also does not belong to household waste at the end of the product life.
You can return it at collection points for the recycling of electronic and electronical instruments
The symbol on the item, instruction manual, hangtag or packing is showing this clearly.
Materials should be recycled according to their respective markings.
Recycling of old devices or other re-use of materials contained therein represents an important
contribution to environmental protection.
Please ask at your local community for the correct collection point.
Disposal of batteries
Batteries should not be disposed of in the household waste. As the consumer you are legally
obliged to return batteries containing harmful substances and all other used batteries. You can
hand in your old batteries at public collection points in your area or wherever batteries are sold.
You will find these chemical abbreviations along with a crossed-out refuse bin on batteries
containing harmful substances:
Pb=Battery contains lead
Cd=Battery contains cadmium
Hg=Battery contains mercury
Chrysler, Dodge, RAM, MOPAR, HEMI, Plymouth,
SRT, Jeep, the Jeep grille and related logos, vehicle
model names and trade dress are tradmarks of FCA
US LLC and used under license by Kidztech Toys
Manufacturing Ltd. © 2015 FCA US LLC.
0890
Conforms to the safety requirements of ASTM F963
KIDZTECH TOYS MANUFACTURING LTD.
Room 1201,12/F, Inter-Continental Plaza,
94 Granville Road, TST East, Hong Kong.
Tel: (852) 27218868
info@kidztech.net
Made in China http://www.kidztech.net

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Modify Date                     : 2016:01:27 14:56:03+08:00
Create Date                     : 2016:01:27 14:56:03+08:00
Metadata Date                   : 2016:01:27 14:56:03+08:00
Creator Tool                    : Adobe Illustrator CC (Windows)
Format                          : application/pdf
Title                           : Rock cruiser_IM_Page 1
Document ID                     : uuid:71f9d60d-47ad-4f76-b97e-c65ae98eeba6
Instance ID                     : uuid:0f607abb-de8e-48a9-99b7-17c5227ae298
Producer                        : Adobe PDF library 11.00
Page Count                      : 2
Creator Version                 : 17
Container Version               : 9
Creator                         : Adobe Illustrator(R) 17.0
For                             : lenovo,
Bounding Box                    : -11 0 596 842

EXIF Metadata provided by EXIF.tools