KIDZTECH TOYS 8455317-24GTX RC 1/10 Rock Cruiser User Manual 84553 1 10 Rock cruiser IM E 20170627 A01

Download:
Mirror Download [FCC.gov]
Document ID	3785908
Application ID	VAc8fZY30HkxDoREIYuxvg==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	148.78kB (1859778 bits)
Date Submitted	2018-03-19 00:00:00
Date Available	2018-03-19 00:00:00
Creation Date	2017-06-30 16:02:13
Producing Software	Adobe PDF library 15.00
Document Lastmod	2018-03-09 18:21:55
Document Title	84553 1-10 Rock cruiser_IM_E_20170627_A01
Document Creator	Adobe Illustrator CC 2017 (Macintosh)

NO.: 84553
age
1:10
How To Bind
1. Turn on the Vehicle.
2. Keep pulling the trigger of the Transmitter forward then turn the Transmitter on. Do not release the trigger until the binding process completed.
3. The LED light of the Transmitter will keep flashing for the binding process, which is within 8 seconds. Do not turn off any buttons while in progress, otherwise,
the process will be terminated.
4. After the wheels of the Vehicle turn left and right and the LED light of the Transmitter stops flashing, the binding process completed for playing.
5. If it cannot complete within 8 seconds, please turn off both Vehicle and Transmitter and re-start the binding process.
6. When the binding process is done, whenever switching the Vehicle and Transmitter on and off, it searches for the code that it memorized, and will only lock on to the
Transmitter signal containing that code.
7. Please turn off both Vehicle and Transmitter and re-start all binding process if changing to another 2.4GHz Transmitter for playing.
How To Play
SCALE
3. Use the Accelerator Trigger to drive the Vehicle Forward, Stop and Backward
1. Switch ON the Vehicle and Transmitter.
Vehicle
Turn Left
PRO. SYSTEM
Turn Right
Contents
-RC Vehicle (Vehicle) x 1
Ni-MH
-RC Transmitter (Transmitter ) x 1
40
-Instruction Manual x 1
ADAPTER
(Included)
RC Vehicle x 1
Battery Precaution
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Alkaline batteries are recommended to be used
Only batteries of the same or equivalent type as recommended are to be used
Do not mix alkaline, standard or rechargeable batteries
Do not mix old and new batteries or different type of batteries
Non-rechargeable batteries are not to be charged
Rechargeable batteries for adult charging only
Rechargeable batteries are to be removed from the product before they are charged
Be sure to insert batteries with correct polarities and always follow the battery manufacturer’s instructions
Remove all batteries from the Vehicle and Transmitter when not in use
Exhausted batteries are to be removed from the product
The supply terminals are not to be short-circuited
Dispose of batteries properly. Do not dispose the batteries in fire – it may cause them to explode or leak causing injury or damage
Battery installation and removal must only be done by adult
For Transmitter (Fig. 3 and Fig. 4)
1. Switch OFF the power.
2. Unscrew the screw on the battery cover.
3. Open the battery cover.
4. Install 3 new 1.5V “AA” batteries with correct polarities
(+/-) as shown inside the battery compartment.
5. Close the battery cover.
6. Tighten the screw on the battery cover.
Fig. 1
Fig. 3
The packaging and instruction manual contain important information. Please keep them
for future reference.
Warning! Choking Hazard. Not suitable for children under the age of 3 years due to
small parts.
We reserve the right to improve/amend specifications and colors without notice.
It shall be regularly examined for damage to the cord, plug enclosure and other parts,
and they must not be used until the damage has been repaired.
Environmental notes:
The whole product also does not belong to household waste at the end of the product life.
You can return it at collection points for the recycling of electronic and electronical instruments
The symbol on the item, instruction manual, hangtag or packing is showing this clearly.
Materials should be recycled according to their respective markings.
Recycling of old devices or other re-use of materials contained therein represents an important
contribution to environmental protection.
Please ask at your local community for the correct collection point.
Disposal of batteries
Batteries should not be disposed of in the household waste. As the consumer you are legally
obliged to return batteries containing harmful substances and all other used batteries. You can
hand in your old batteries at public collection points in your area or wherever batteries are sold.
You will find these chemical abbreviations along with a crossed-out refuse bin on batteries
containing harmful substances:
Pb=Battery contains lead
Cd=Battery contains cadmium
Hg=Battery contains mercury
9.6V
Vehicle - Battery Installation
1. Do not attempt to disassemble the Vehicle or Transmitter
2. Make sure the batteries are installed with correct polarities (+/-) as shown inside the
battery compartment
3. Remove the package and take out all accessories before giving the Vehicle and
Transmitter to child to play
Declaration of Conformity
ON/OFF
Accelerator
Trigger
Cautions
The product is in conformity with the requirement of EU Directive 2014/53/EU
Transmitter
Battery
Compartment
Do not drive on grass, dirt, sand, dusts, carpet or go through water
Do not drive in windy or rainy weather
Avoid direct impact the Vehicle with obstacles
Switch OFF the power when not in use to prevent damage of Vehicle and Transmitter
due to leakage of electrolyte from batteries
5. Remove all batteries from the Vehicle and Transmitter when not in use for long period
6. Keep fingers, hair and loose clothing away from wheels
7. The operating range can be affected by a variety of factors
a) Low Voltage of batteries in Transmitter or Vehicle
b) Interference from other items that emit radio frequency signals
8. Outdoor usage is recommended in order to get optimum control range
9. Recommend to play the vehicle on a clean and smooth surface
10. Clean the battery compartment to make sure it is free from dust to prevent poor
contact of batteries
This device complies with Industry Canada Licence-exempt RSS 210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
LED Battery
Indicator
ON/OFF
1.
2.
3.
4.
RSS 210 Compliance Statement:
Fig. 4
Direction
Adjustment
Performance Tips
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Fig. 2
Vehicle
4. If the vehicle does not run in straight line, adjust the
Direction Adjustment on the Vehicle chassis
5. Play on smooth surface to have the optimum performance
6. Remember to switch OFF the power of the Vehicle and
Transmitter after playing
7. The optimum control range is up to 40m outdoor
FCC label compliance statement:
Battery Installation
For Vehicle (Fig. 1 and Fig. 2)
1. Switch OFF the power.
2. Unscrew the screw on the battery cover.
3. Open the battery cover.
4. Install a new 9.6V battery pack with correct polarities (+/-)
as shown inside the battery compartment.
5. Close the battery cover.
6. Tighten the screw on the battery cover.
Backward
9.6V
700mAh
For Vehicle
(Included )
3 x AA
For Transmitter
(Not Included)
RC Transmitter x 1
Stop
Forward
Transmitter
2. Use the Steering Wheel to control the Vehicle turning left or right
9.6V
NO.: 84553
Steering
Wheel
Conforms to the safety requirements of ASTM F963
A.W.E.CO
SRL
(Kidztech
Via C. Scarpa 140, 36100 Vicenza, Italy
Transmitter - Battery Installation
Frequency band : 2405 – 2475 MHz
Maximum radio frequency power transmitted : <10
dBm
Toys)
KIDZTECH TOYS MANUFACTURING LTD. Room 1201,12/F,
Inter-Continental Plaza, 94 Granville Road, TST East, Hong
Kong. Tel: (852) 27218868
info@kidztech.net Made in
China http://www.kidztech.net
Shantou Chenghai JinJun Toys Co. Ltd
Yongxin Industry Zone, Lianshang, Chenghai, Shantou,
China
KT27/06/17-01EN

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2017:06:30 16:02:13+08:00
Creator                         : Adobe Illustrator CC 2017 (Macintosh)
Creator Version                 : 21.0.0
Modify Date                     : 2018:03:09 18:21:55+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Title                           : 84553 1-10 Rock cruiser_IM_E_20170627_A01
Creator Tool                    : Adobe Illustrator CC 2017 (Macintosh)
Metadata Date                   : 2018:03:09 18:21:55+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 184
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 23184 bytes, use -b option to extract)
Document ID                     : xmp.did:a65d28e4-974a-42b5-bbcd-d2f43a674593
Instance ID                     : uuid:c2f4e691-ddd2-4fb2-945e-3bb7e42867bc
Rendition Class                 : proof:pdf
Original Document ID            : uuid:819A97389468E2118C6ACD37CA1DCDB5
Derived From Instance ID        : xmp.iid:712ef044-2d47-4efd-8770-5672b89e7089
Derived From Document ID        : xmp.did:712ef044-2d47-4efd-8770-5672b89e7089
Derived From Original Document ID: uuid:819A97389468E2118C6ACD37CA1DCDB5
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:21AB06EFC08AE2119828FA54C2019313, xmp.iid:a65d28e4-974a-42b5-bbcd-d2f43a674593
History When                    : 2013:03:12 14:52+08:00, 2017:06:30 16:02:07+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CC 2017 (Macintosh)
History Changed                 : /, /
Startup Profile                 : Print
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 440.972222
Max Page Size H                 : 317.147222
Max Page Size Unit              : Millimeters
Font Name                       : ArialNarrow, 321impact, ArialNarrow-Bold, Arial-Black, ArialMT, Impact, MyriadPro-BoldCond, Bauer, BoltBoldITCbyBT-Regular, ContinuumBold, ContinuumMedium, HelveticaNeue-Bold
Font Family                     : Arial, 321impact, Arial, Arial, Arial, Impact, Myriad Pro, Bauer, ITC Bolt Bold BT, Continuum Bold, Continuum Medium, Helvetica Neue
Font Face                       : Narrow, Regular, Narrow Bold, Black, Regular, Regular, Bold Condensed, Regular, Regular, Regular, Regular, Bold
Font Type                       : Open Type, TrueType, Open Type, Open Type, Open Type, Open Type, Open Type, TrueType, Open Type, TrueType, TrueType, TrueType
Font Version                    : Version 2.40, Version 1.00 March 8, 2007, initial release, Version 2.40, Version 5.22, Version 6.90, Version 5.10, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, 31-01-00, 2.0-1.0, Macromedia Fontographer 4.1 5/6/96, Macromedia Fontographer 4.1 5/6/96, 8.0d6e1
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : ARIALN.TTF, 321_Impact_Font_by_angelesart.ttf, ARIALNB.TTF, ariblk.ttf, arial.ttf, impact.ttf, MyriadPro-BoldCond.otf, BAUERG.TTF, BoltBoldITCbyBT-Regular.otf, contb.ttf, contm.ttf,
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 預設色票群組
Swatch Group Type               : 0
Producer                        : Adobe PDF library 15.00
Page Count                      : 1

EXIF Metadata provided by EXIF.tools