KIDZTECH TOYS 8856116-27MTX 1/12 R/C Cars User Manual KT88561 1 12 SteeringWheel IM BO 01

RC Vehicle (Vehicle) x 1

RC Transmitter (Transmitter) x 1

Instruction Manual x 1

Battery Precaution

1. Alkaline batteries are recommended to be used

2. Only batteries of the same or equivalent type as recommended are to be used

3. Do not mix alkaline, standard or rechargeable batteries

4. Do not mix old and new batteries or different type of batteries

11. The supply terminals are not to be short-circuited

12. Dispose of batteries properly. Do not dispose the batteries in fire – it may cause them to explode or leak causing injury or damage

Battery installation and removal must only be done by adult

Charger used with the toy are to be regularly examined for damage to the cord, plug, enclosure and other parts, and that, in the event

of such damage, the toy must not be used with this charger until the damage has been repaired.

How to Play

1. Switch ON the Vehicle, the front and back lights of the Vehicle will be flashing.

2. Switch ON the Transmitter, the indicator light (center one) of the Transmitter will be flashing.

3. Touch the Start button, the indicator light (center one) of the Transmitter stop flashing, there will be engine sound and now the Transmitter is connected with the Vehicle.

4. Touch the Forward button, to drive the car forward. The indicator light (left one) on the Transmitter will be lighting up, with driving sound from the Transmitter.

11. Touch the Start button again, to disconnect the Transmitter with the Vehicle. The indicator light (center one) of the Transmitter will be flashing again. The front and

back lights of the Vehicle will be flashing again.

12. If the VEHICLE does not run in straight line, adjust the Direction Adjustment on the VEHICLE chassis (Fig. 1).

13. Play on smooth surface to have the optimum performance.

14. Remember to switch OFF the power of the Vehicle and Transmitter after playing.

15. The optimum control range is up to 20m outdoor.

Driving Mode

1. The default driving mode is TABLE DRIVING, where you need to put the Transmitter on the horizontal surface, and turn the Transmitter left or right to drive the Vehicle.

2. Touch the Driving Mode button, the arrow indicator lights (left and right ones) will be lighting up and now it is in MOTION SENSOR driving mode, take the Transmitter

with you and simply turn it left or right like real driving.

5. When the Vehicle brakes, the front lights and back lights will be brighter.

Performance Tips

1. Do not drive on grass, dirt, sand, dusts, carpet or go through water.

2. Do not drive in windy or rainy weather.

3. Avoid direct impact the Vehicle with obstacles.

4. Switch OFF the power when not in use to prevent damage of Vehicle and Transmitter due to leakage of electrolyte from batteries.

5. Remove all batteries from the Vehicle and Transmitter when not in use for long period.

6. Keep fingers, hair and loose clothing away from wheels.

7. The operating range can be affected by a variety of factors.

a) Low Voltage of batteries in Transmitter or Vehicle.

2. Do not operate the Vehicle with same frequency with other player(s) in same location that will interfere and make the Vehicle out of control.

3. Make sure the batteries are installed with correct polarities (+/-) as shown inside the battery compartment.

4. Remove the package and take out all accessories before giving the Vehicle and Transmitter to child to play.

FCC label compliance statement:

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and

found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

RSS-310 Compliance Statement:

This device complies with Industry Canada Licence-exempt RSS-310. Operation is subject to the following two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation of the device

Declaration of Conformity

The product is in conformity with the requirement of EU Directive 1999/5/EC

Environmental notes:

The whole product also does not belong to household waste at the end of the product life.

You can return it at collection points for the recycling of electronic and electronical instruments

The symbol on the item, instruction manual, hangtag or packing is showing this clearly.

You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing harmful substances:

Pb=Battery contains lead

Cd=Battery contains cadmium

Hg=Battery contains mercury

6 x AA

For Vehicle

( Not Included )

4 x AA

RADIO CONTROL