KIDZTECH TOYS 89023-49MTX 1/26 R/C Big Foot / 1/24 R/C Off-Road Trucky User Manual GM RC Big foot Dry cell im 1 26 891 67 3

Download:
Mirror Download [FCC.gov]
Document ID	2320854
Application ID	FFmzSo0JKcu6lnI7+sKSVg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	105.68kB (1320947 bits)
Date Submitted	2014-07-10 00:00:00
Date Available	2014-07-10 00:00:00
Creation Date	2014-06-23 11:56:23
Producing Software	Adobe PDF library 11.00
Document Lastmod	2014-06-23 11:56:23
Document Title	GM RC Big foot Dry cell im 1-26 891(67)3
Document Creator	Adobe Illustrator CC (Windows)

Cautions
RADIO CONTROL
VEHICLE
BIG FOOT 1:26
Battery Requirement
Contents
1. Vehicle: 4 x 1.5V ”AA” batteries
2. Transmitter: 1 x 9V battery
RC Vehicle (Vehicle) x 1
RC Transmitter (Transmitter) x 1
Antenna for RC Transmitter x 1
Instruction Manual x 1
1 x 9V
4 x AA
For Transmitter
( Not Included )
For Vehicle
( Not Included )
Battery Precaution
1. Alkaline batteries are recommended to be used
2. Only batteries of the same or equivalent type as recommended are to be used
3. Do not mix alkaline, standard or rechargeable batteries
4. Do not mix old and new batteries or different type of batteries
5. Non-rechargeable batteries are not to be charged
6. If rechargeable batteries are to be used, they are only to be charged under adult supervision
7. Rechargeable batteries are to be removed from the product before they are charged
8. Be sure to insert batteries with correct polarities and always follow the battery manufacturer’s instructions
9. Remove all batteries from the Vehicle and Transmitter when not in use
10. Exhausted batteries are to be removed from the product
11. The supply terminals are not to be short-circuited
12. Dispose of batteries properly. Do not dispose the batteries in fire – it may cause them to explode or leak causing injury or damage
13. Battery installation and removal must only be done by adult
Battery and Antenna Installation
Fig. 2
Vehicle
Do not attempt to disassemble the Vehicle or Transmitter
Do not operate the Vehicle with same frequency with other player(s) in same location that will interfere and make the Vehicle out of control.
Make sure the batteries are installed with correct polarities (+/-) as shown inside the battery compartment
Remove the package and take out all accessories before giving the Vehicle and Transmitter to child to play
FCC label compliance statement:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RSS-310 Compliance Statement:
This device complies with Industry Canada Licence-exempt RSS-310. Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Declaration of Conformity
The product is in conformity with the requirement of EU Directive 1999/5/EC
Environmental notes:
For Transmitter (Fig. 3 and Fig. 4)
1. Switch OFF the power
2. Unscrew the screw on the battery cover
3. Open the battery cover
4. Install 1 new 9V battery with correct polarity (+/-) as shown inside the battery
compartment
5. Close the battery cover
6. Tighten the screw on the battery cover
7. Insert the antenna into the top of Transmitter, tighten it by rotating clockwise
(viewing from top of Transmitter)
For Vehicle (Fig. 1 and Fig. 2)
1. Switch OFF the power
2. Unscrew the screw on the battery cover
3. Open the battery cover
4. Install 4 new 1.5V “AA” batteries with correct polarities (+/-)
as shown inside the battery compartment
5. Close the battery cover
6. Tighten the screw on the battery cover
1.
2.
3.
4.
The whole product also does not belong to household waste at the end of the product life.
You can return it at collection points for the recycling of electronic and electronical instruments
The symbol on the item, instruction manual, hangtag or packing is showing this clearly.
Materials should be recycled according to their respective markings.
Recycling of old devices or other re-use of materials contained therein represents an important contribution to environmental protection.
Please ask at your local community for the correct collection point.
Please retain this sheet and address for future use, as they contain important information.
Disposal of batteries
Batteries should not be disposed of in the household waste. As the consumer you are legally obliged to return batteries containing harmful substances and all
other used batteries. You can hand in your old batteries at public collection points in your area or wherever batteries are sold.
You will find these chemical abbreviations along with a crossed-out refuse bin on batteries containing harmful substances:
Pb=Battery contains lead
Cd=Battery contains cadmium
Hg=Battery contains mercury
Fig. 4
Transmitter
Direction
Adjustment
Transmitter
Antenna
Battery
Compartment
1.5V AA
LED Battery
Indicator
1.5V AA
1.5V AA
Forward /
Backward
1.5V AA
Left / Right
9V
Battery
OFF / ON
ON/OFF Switch
Fig. 1
Vehicle - Battery Installation
Fig. 3
How to Play
1.
2.
3.
4.
5.
6.
7.
Switch ON the Vehicle
Use the Forward / Backward joystick (Fig.3) to drive the Vehicle forward and backward
Use the Left / Right joystick (Fig.3) to control the Vehicle turning left or right
If the vehicle does not run in straight line, adjust the wheel alignment lever on the vehicle chassis (Fig. 1)
Play on smooth surface to have the optimum performance
Remember to switch OFF the power of the Vehicle and Transmitter after playing
The optimum control range is up to 10m outdoor
Transmitter - Battery installation
The packaging and instruction manual contain important information. Please keep them for future reference.
Warning! Choking Hazard. Not suitable for children under the age of 3 years due to small parts.
We reserve the right to improve/amend specifications and colors without notice.
Warning! The Antenna of vehicle is not to be inserted into socket outlets.
Performance Tips
Do not drive on grass, dirt, sand, dusts, carpet or go through water
Do not drive in windy or rainy weather
Avoid direct impact the Vehicle with obstacles
Switch OFF the power when not in use to prevent damage of Vehicle and Transmitter due to leakage of electrolyte from batteries
Remove all batteries from the Vehicle and Transmitter when not in use for long period
Keep fingers, hair and loose clothing away from wheels
The operating range can be affected by a variety of factors
a) Low Voltage of batteries in Transmitter or Vehicle
b) Interference from other items that emit radio frequency signals
8. Outdoor usage is recommended in order to get optimum control range
9. Recommend to play the vehicle on a clean and smooth surface
10. Clean the battery compartment to make sure it is free from dust to prevent poor contact of batteries
KIDZTECH TOYS MANUFACTURING LTD.
Room 1201,12/F, Inter-Continental Plaza,
94 Granville Road, TST East, HK.
Tel: (852) 27218868
Info@kidztech.net
Made in China
http://www.kidztech.net
99-151211-48621
1.
2.
3.
4.
5.
6.
7.
General Motors
Trademarks used under license to
Kidztech Toys Manufacturing LTD
Ford Motor Company Trademarks and
Trade Dress used under license to
KidzTech Toys Manufacturing Ltd.
TOYOTA , FJ Cruiser and all other
associated marks,emblems and designs
are intellectual property rightsof Toyota
Motor Corporation and used with
permission.
KT9/11/11-00E

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.5-c014 79.151739, 2013/04/03-12:12:15
Format                          : application/pdf
Title                           : GM RC Big foot Dry cell  im 1-26 891(67)3
Metadata Date                   : 2014:06:23 11:56:23+08:00
Modify Date                     : 2014:06:23 11:56:23+08:00
Create Date                     : 2014:06:23 11:56:23+09:00
Creator Tool                    : Adobe Illustrator CC (Windows)
Thumbnail Width                 : 256
Thumbnail Height                : 184
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 17658 bytes, use -b option to extract)
Instance ID                     : uuid:f89a359a-6b6e-4c35-8e71-4a354ad805a5
Document ID                     : xmp.did:5e2b7730-4fc7-a945-9361-a87c1491e03f
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:0dba7d6f-cf23-4498-823a-e778d4b51523
Derived From Document ID        : xmp.did:AB379C2B48CFE21197F4A1CA6630D49B
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:648F70ACC005E111BCBBA3771F521898, xmp.iid:5e2b7730-4fc7-a945-9361-a87c1491e03f
History When                    : 2011:11:03 10:08:08+08:00, 2014:06:23 11:56:18+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CC (Windows)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 839.999201
Max Page Size H                 : 594.000177
Max Page Size Unit              : Millimeters
Font Name                       : Arial-BoldMT, Arial-Black, ArialMT, SimHei
Font Family                     : Arial, Arial, Arial, 黑体
Font Face                       : Bold, Black, Regular, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 5.08, Version 5.06, Version 5.10, Version 5.01
Font Composite                  : False, False, False, False
Font File Name                  : arialbd.ttf, ariblk.ttf, arial.ttf, simhei.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 預設色票群組
Swatch Groups Group Type        : 0
Producer                        : Adobe PDF library 11.00
Page Count                      : 1
Creator                         : Adobe Illustrator CC (Windows)

EXIF Metadata provided by EXIF.tools