KIMIN Electronics PT32U44K PDP TV User Manual User s Manual H ok

Kimin Electronic Co., Ltd PDP TV User s Manual H ok

USERS MANUAL

EUT Type: PDP TV FCC ID: TGEPT32U44K Test Report No.: GETEC-E3-08-008 FCC Class B Certification APPENDIX H : USER’S MANUAL
OWNER’S MANUALOWNER’S MANUALPLASMA TVPLASMA TVPlease read this manual carefully before operating your set.Retain it for future reference.PT32U44H
3WARNING / CAUTIONTO REDUCE THE RISK OF ELECTRICSHOCK DO NOT REMOVE COVER (ORBACK). NO USER SERVICEABLE PARTSINSIDE. REFER TO QUALIFIED SERVICEPERSONNEL.TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TORAIN OR MOISTURE.The lightning flash with arrowheadsymbol, within an equilateral triangle,is intended to alert the user to thepresence of uninsulated “dangerousvoltage” within the product’s enclosurethat may be of sufficient magnitude toconstitute a risk of electric shock topersons.The exclamation point within an equi-lateral triangle is intended to alert theuser to the presence of importantoperating and maintenance (servicing)instructions in the literature accompa-nying the appliance.WARNING/CAUTIONRISK OF ELECTRIC SHOCKDO NOT OPENWARNING/CAUTIONThis reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NationalElectric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifiesthat the cable ground shall be connected to the grounding system of the building, as close to the point ofthe cable entry as practical.NOTE TO CABLE/TV INSTALLERDo not attempt to modify this product in any way without written authorization from the dealer.Unauthorized modification could void the user’s authority to operate this product.CAUTION
4WARNING / CAUTIONClass B digital deviceThis equipment has been tested and found to comply with the limits for a Class B digital device, pur-suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used inaccordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter-mined by turning the equipment off and on, the user is encouraged to try to correct the interference byone or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.a. The fluorescent lamp used in this product contains a small amount of mercury.b. Do not dispose of this product with general household waste.c. Disposal of this product must be carried out in accordance to the regulations of your local authority. To prevent fire or shock hazards, do not expose this product to rain or moisture.FCC NOTICEOn DisposalChanges or modification not expressly approved by the party responsible for compliance could void theuser’s authority to operate the equipment.Caution
5Important Safety InstructionsYour product has been manufactured and tested with your safety in mind. However, improper use can result in potential electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observethe following safety points when installing and using your new product, and save them for future refer-ence.Observing the simple precautions discussed in this operating guide can help you get many years ofenjoyment and safe operation that are built into your new product.This product complies with all applicable U.S. Federal regulations and voluntary safety standards.The following safety instructions shall be included where applicable, and, when used, shall be verbatimas follows.1. Do not use this apparatus near water.2. Clean only with dry cloth.3. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.4. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus(including amplifiers) that produce heat.5. Do not defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two blades with one wider than the other. Agrounding type plug has two blades and a third grounding prong, the wide blade or the third prongare provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsoleteoutlet.6. Protect the power cord from being walked on or pinched particularly at plugs, convenience recepta-cles, and the point where they exit from the apparatus.7. Only use attachments/accessories specified by the manufacturer.8. Unplug this apparatus when unused for long periods of time.9. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with theapparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoidinjury from tip-over.10.Never touch this apparatus or antenna during a thunder or lighting storm.11. Do not allow a impact shock or any objects to fall into the product, and do not drop onto the screenwith something. (You may be injured or the product can be damaged.)12.Refer all servicing to qualified service personnel.Servicing is required when the apparatus has been damaged in any way, such as power-supply cordor plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatushas exposed to rain or moisture, does not operate normally, or has been dropped.
6Important Safety Instructions13.CAUTION concerning the Power Cord :Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuitwhich powers only that appliance and has no additional outlets or branch circuits.Check the specification page of this owner's manual to be certain.Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, ordamaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deteriora-tion, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replace-ment part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.14.Outdoor use marking :WARNING - To reduce the risk of fire or electric shock, do not expose this appliance to rain or mois-ture.15.Wet Location Marking : Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such asvases, shall be placed on or over apparatus.16.GROUNDINGEnsure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker.Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.17.DISCONNECTING DEVICE FROM MAINSMains plug is the disconnecting device. The plug must remain readily operable.
7ContentsWARNING / CAUTION 3-4Important Safety Instructions 5-6Contents 7-8Accessories 9Supplied Accessories 9Installing Batteries 9Controls 10-13Front Panel 10Rear Panel 11Remote Control 12-13Installation 14Wall mount Installation 14Desktop Pedestal Installation 14Connections 15-24Antenna Connection 15VCR Connection 16-17DVD Connection 18-19STB Connection 20-21External A/V Source 22PC Connection 23Resolution 24Basic Operation 25-26Turning On or Off 25Programme Selection 25Volume Adjustment 25Sound Mute 25Quick View 25Input Selection 26Language Selection 26On Screen Menus 27Setting up TV Channel 28-30Auto Scan 28Add/Delete Channel 29Calling the Channel List 30EPG(Electronic Program Guide) 30
8ContentsPicture Controls 31-34Auto Picture Controls 31Manual Picture Controls 32Color Temperature 33Digital Noise Reduction 34Sound Controls 35-37Auto Sound Controls 35Manual Sound Controls 36SPDIF 37STEREO/SAP BROADCAST SETUP 37Time Setting 38-42Time Zone Setting 38Auto Time Setting 39Manual Time Setting 40Auto On/Off Time Setting 41Sleep Timer 42Captions 43-45Closed Caption-Analog 43Closed Caption-Digital 44Closed Caption Options 45Reset 46Reset Default 46Setting the PC Mode 47-42Auto Picture Controls 47Manual Picture Control 48Color Temperature 49Auto Adjustment 50Manual Adjustment 51Special Functions 52Picture Format 52Freezing the current picture 53Specification 54Troubleshooting 55
9AccessoriesSupplied AccessoriesInstalling Batteries1.5V1.5VIPISLEEPISIDISPLAYPOWERCCMTSTIMEFREEZEZOOMLOCK EPG LIST1472580396MENUSOURCEMUTEEXITVOL CHOKDVD/ZOOMA-B TITLESETUP REPEATSUB-T AUDIO1Open the battery coveron the back side.2Insert two batteries incorrect polarity, match (+ with +), and match (- with -).Don't mix old batterieswith new batteries.3Close the battery cover.Batteries Power cordRemote ControlOwner’s Manual
10ControlsFront Panel 6VOLVOLTV/AVMENUCHCH123451. VOL + / VOL -Adjusts menu settings.Selects menu item.2. CH + / CH - Select a channel.3. TV/AVSelects the TV, AV,S-Video, YPbPr1, YPbPr2,VGA,HDMI1 or HDMI2 mode.4. MENUDisplay on screen menus.5. POWERSwitches the set on or off.6. Power IndicatorIlluminates in bright blue when the TV is in standby mode.Illuminates in dark blue when the TV is switched on.Remote control sensorAccepts the IR signal of remote controller.Here shown may be somewhat different from your set.NNNNOOOOTTTTEEEE
11ControlsRear PanelHDMI IN2HDMI/DVI IN1RGB IN(PC) AUDIO IN(RGB/DVI) SPDIFOUTCOMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOANTENNAINCOMPONENT1L LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT121 3 9 10 115 6 7 841. HDMI/DVI1 INConnect to the HDMI jack for device with HDMIoutput. This input can also be used as a DVI connec-tion with separate analog audio inputs.2. HDMI2 INConnect to the HDMI jack for device with HDMIoutput. 3. RGB IN (PC)Connect to the video output jack on your PC.4. VIDEO INConnect video output from an external deviceto these jack.5. S-VIDEOConnect the output of an S -VIDEO VCR to theS-VIDEO input.6. COMPONENT1 / COMPONENT2 VIDEO INVideo inputs for Component.7. COMPONENT1 / COMPONENT2 AUDIO INAudio inputs for Component.8. A/V INRCA audio signals from the TV to an externalsource, such as Audio equipment.9. AUDIO IN (RGB/DVI)Connect to the audio output jack on your PC.10.SPDIF OUTConnect digital audio to various types of equip-ment.11.ANTENNA INConnect to your aerial for TV signal.
12ControlsRemote ControlIPISLEEPISIDISPLAYPOWERCCMTSTIMEFREEZEZOOMLOCK EPG LIST1472580396MENUSOURCEMUTEEXITVOL CHOKDVD/ZOOMA-B TITLESETUP REPEATSUB-T AUDIO1. POWERSwitches the set on or off.2. CCSelect the Caption menu directly.LOCKSelect the Parental menu directly.EPGDisplays the program guide.LISTDisplays the channel list.3. MTSSelect MTS sound : Mono, Stereo and SAP analogmode.Change the audio language DTV mode.TIMEDisplay the current time.FREEZEYou can pause the screen you are viewing. ZOOMSelects your desired picture format.4. NUMBER BUTTONSSelects channel numbers.5. Hyphen( )Press to select DTV channels. For example, to select channel ‘10-1’, press ‘10’ thenpress ‘ ’ and ‘1’.6. Switch to the previous channel number.7. Recalls your preferred picture setting.8. Recalls your preferred sound setting.1234785 6
13ControlsIPISLEEPISIDISPLAYPOWERCCMTSTIMEFREEZEZOOMLOCK EPG LIST1472580396MENUSOURCEMUTEEXITVOL CHOKDVD/ZOOMA-B TITLESETUP REPEATSUB-T AUDIO9. VOL+ / VOL-Adjusts sound level.10.CH+ / CH-Select a channel.11.SLEEPSets the sleep timer.12.DISPLAYShows the present screen information.13.MENUDisplay on screen menus.14.SOURCESelects the TV, AV,S-Video, YPbPr1, YPbPr2,VGA,HDMI1 or HDMI2 mode.15.DD/EE/FF/GGAdjusts menu settings.Selects menu item.OKAccepts your selection or displays the present screeninformation.16.MUTESwitches the sound on or off.17.EXITClear all on-screen menus and return to TV viewingfrom any menu.18.DVD buttonsControls DVD players.Can not use in this model.1618171315141112910
14Installation Wall mount Installation4 inches4 inches4 inches4 inches4 inchesThe set can be installed on a wall as shown above.For proper ventilation, allow a clearance of 4inches on all four sides from the wall.Detailed instructions are available from your dealer, refer to the optional Wall Mounting BracketInstallation and Setup Guide.Desktop Pedestal Installation4 inches4 inches4 inches4 inchesThe set can be mounted on a desk as shown above.For proper ventilation, allow a clearance of 4inches on each side from the wall.Detailed instructions are available from your dealer, refer to the optional Desktop Stand Installation andSetup Guide.
15ConnectionsAntenna ConnectionAUDIO IN(RGB/DVI)SPDIFOUTANTENNAINL LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT1Multi-family Dwellings/ Apartments(Connect to wall antenna socket)Single-family Dwellings /Houses(Connect to wall jack for outdoor antenna)Wall Antenna SocketRF Coaxial Wire (75 ohm)VHFUHFOutdoor AntennaTurn clockwise to tighten.Be careful not to bend the bronze wire whenconnecting to an antenna port.* Separately purchase a RF Coaxial Wire(75 ohm)OTo improve the picture quality in a poor signalarea, please purchase a signal amplifier and installproperly.OIf the antenna is not installed properly, contactyour dealer for assistance.NNNNOOOOTTTTEEEEAUDIO IN(RGB/DVI) SPDIFOUTANTENNAINL LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT1VHF UHFSignalAmplifier
16ConnectionsVCR ConnectionAUDIO IN(RGB/DVI)SPDIFOUTANTENNAINL LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT1ANT INANT OUT S-VIDEOINOUT(R) AUDIO (L) VIDEO1. Connect the Antenna out socket of the VCR tothe Antenna input socket on the TV.2. Press the PLAY button on the VCR and matchthe appropriate channel between the TV andVCR for viewing.OWhen connecting the TV to VCR, matches the jack colors.OTypically a frozen still picture from a VCR. If the 4:3 picture format is used : the fixed images on thesides of the screen may remain visible on the screen.OTo avoid picture noise (interface), leaves an adequate distance between the TV and the VCR.AWhen connecting with an antennaANT INANT OUT S-VIDEOINOUT(R) AUDIO (L) VIDEOOUTPUTSWITCHAUDIO IN(RGB/DVI)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1L LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT11. Connect the AUDIO/VIDEO jacks between TVand VCR. Match the jack colors (Video = yel-low, Audio Left = white, and Audio Right = red)2. Insert a video tape into the VCR and pressPLAY on the VCR. 3. Select the AV input source with using theSOURCE button on the remote control.4. Refer to the VCR manual for operating instruc-tions.AWhen connecting with a RCA cableVCRVCRBack panel of the setBack panel of the set
17ConnectionsANT INANT OUT S-VIDEOINOUT(R) AUDIO (L) VIDEOOUTPUTSWITCHAUDIO IN(RGB/DVI)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1L LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT11. Connect the S-VIDEO output of the VCR to theS-VIDEO input on the set. The picture quality isimproved; compared to normal composite (RCAcable) input.2. Connect the audio outputs of the VCR to theVIDEO1 AUDIO L, R input jacks on the set.3. Insert a video tape into the VCR and pressPLAY on the VCR. 4. Select the S-Video input source with using theSOURCE button on the remote control.5. Refer to the VCR manual for operating instruc-tions.AWhen connecting with a S-Video cableVCRBack panel of the set
18ConnectionsDVD ConnectionANT INANT OUT S-VIDEOINOUT(R) AUDIO (L) VIDEOOUTPUTSWITCHAUDIO IN(RGB/DVI)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1L LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT11. Connect the S-VIDEO output of the DVD to theS-VIDEO input on the set.2. Connect the audio outputs of the DVD to theVIDEO1 AUDIO L, R input jacks on the set.3. Turn on the DVD player, insert a DVD.4. Select S-Video input source with using theSOURCE button on the remote control.5. Refer to the DVD player's manual for operatinginstructions.AWhen connecting with a S-Video cableAUDIO IN(RGB/DVI)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1L LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT1(R) AUDIO (L)YPb Pr1. Connect the video outputs (Y, PB, PR) of theDVD to the COMPONENT1 VIDEO(Y, Pb, Pr)or COMPONENT2 VIDEO(Y, Pb, Pr) jacks onthe set.2. Connect the audio outputs of the DVD to theCOMPONENT1 AUDIO L, R or COMPONENT2AUDIO L, R jacks on the set.3. Turn on the DVD player, insert a DVD.4. Select YPbPr or YPbPr2 source with using theSOURCE button on the remote control.5. Refer to the DVD player's manual for operatinginstructions.AWhen connecting with a Component cableDVDBack panel of the setDVDBack panel of the set
19ConnectionsHDMI IN2HDMI/DVI IN1RGB IN(PC)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1HDMI-DVD OUTPUT1. Connect the HDMI output of the DVD to theHDMI/DVI1 IN or HDMI2 IN jack on the set.2. Select HDMI1 or HDMI2 input source withusing the SOURCE button on the remote con-trol.3. Refer to the DVD player's manual for operatinginstructions.AWhen connecting with a HDMI cableDVDBack panel of the set
20ConnectionsHDSTB ConnectionRGB IN(PC) AUDIO IN(RGB/DVI)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1L LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT1(R) AUDIO (L) RGB-DTV OUTPUT1. Connect the RGB output of the digital set-topbox to the RGB IN (PC) jack on the set.2. Connect the audio outputs of the set-top box tothe AUDIO IN (RGB/DVI) jack on the set.3. Turn on the digital set-top box.4. Select PC input source with using the SOURCEbutton on the remote control.5. Refer to the digital set-top box manual for oper-ating instructions.AWhen connecting with a D-Sub 15 pin cableHDMI IN2HDMI/DVI IN1RGB IN(PC)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1HDMI-DVD OUTPUT1. Connect the HDMI output of the digital set-topbox to the HDMI/DVI1 IN or HDMI2 IN jack onthe set.2. Turn on the digital set-top box.3. Select HDMI1 or HDMI2 input source withusing the SOURCE button on the remote con-trol.4. Refer to the digital set-top box manual for oper-ating instructions.AWhen connecting with a HDMI cableOThis TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device,refer to the figure as shown below.DigitalSet-topBoxDigital Set-top BoxBack panel of the setBack panel of the set
21ConnectionsAUDIO IN(RGB/DVI)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1L LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT1(R) AUDIO (L)YPb Pr1. Connect the video outputs (Y, PB, PR) of theDVD to the COMPONENT1 VIDEO(Y, Pb, Pr)or COMPONENT2 VIDEO(Y, Pb, Pr) jacks onthe set.2. Connect the audio outputs of the DVD to theCOMPONENT1 AUDIO L, R or COMPONENT2AUDIO L, R jacks on the set.3. Turn on the DVD player, insert a DVD.4. Select YPbPr or YPbPr2 source with using theSOURCE button on the remote control.5. Refer to the digital set-top box manual for oper-ating instructions.AWhen connecting with a Component cableHDMI IN2HDMI/DVI IN1RGB IN(PC) AUDIO IN(RGB/DVI)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1L LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT1DVI-DTV OUTPUT (R) AUDIO (L)1. Connect the DVI output of the digital set-topbox to the HDMI/DVI IN jack on the set.2. Connect the audio outputs of the set-top box tothe AUDIO IN (RGB/DVI) jack on the set.3. Turn on the digital set-top box.4. Select HDMI1 input source with using theSOURCE button on the remote control.5. Refer to the digital set-top box manual for oper-ating instructions.AWhen connecting with a HDMI to DVI cableDigitalSet-topBoxBack panel of the setDigitalSet-topBoxBack panel of the set
22ConnectionsExternal A/V Source AUDIO IN(RGB/DVI)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1L LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT1R-AUDIO-L VIDEOOUT1. Connect the AUDIO/VIDEO jacks between TVand external equipment. Match the jack colors(Video = yellow, Audio Left = white, and AudioRight = red)2. Select the AV input source with using theSOURCE button on the remote control.3. Operate the corresponding external equipment.4. Refer to the external equipment manual foroperating instructions.Camcorder Video game setBack panel of the setDigital Audio OutAUDIO IN(RGB/DVI)SPDIFOUTANTENNAINL LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT11. Connect one end of the optical or coaxial cableto the TV’s SPDIF OUT port.2. Connect the other end of the optical or coaxialcable to the digital audio input on the audioequipment.3. Set the “SPDIF Type option - Off” in the AUDIOmenu.4. Refer to the external audio equipment manualfor for operation.Audio EquipmentBack panel of the set
23ConnectionsPC ConnectionDVI OUTPUT AUDIO OUTHDMI IN2HDMI/DVI IN1RGB IN(PC) AUDIO IN(RGB/DVI)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1L LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT11. Connect the DVI output of the PC to theHDMI/DVI1 IN jack on the set.2. Connect the PC audio outputs to the AUDIO IN(RGB/DVI) jack on the set.3. Turn on the PC and the set.4. Select HDMI1 input source with using theSOURCE button on the remote control.AWhen connecting with a HDMI to DVI cableAUDIO OUT PC OUTPUTRGB IN(PC) AUDIO IN(RGB/DVI)COMPONENT2YPbPrYPbPrVIDEO INVIDEO1S-VIDEOCOMPONENT1L LR RCOMPONENT2VIDEO1RLAUDIO INCOMPONENT11. Connect the RGB output of the PC to the RGBIN(PC) jack on the set.2. Connect the PC audio outputs to the AUDIO IN(RGB/DVI) jack on the set.3. Turn on the PC and the set.4. Select PC input source with using the SOURCEbutton on the remote control.AWhen connecting with a D-Sub 15 pin cablePCBack panel of the setPCBack panel of the set
24ConnectionsResolutionResolution640 x 480800 x 6001024 x 768720 x 40031.4737.8637.5035.1637.8848.0846.8848.3656.4860.0231.4759.9472.8175.0056.2560.3272.1975.0060.0070.0775.0370.00Horizontal Frequency (kHz) VerticalFrequency (Hz)a. The synchronization input form is separate.b. If the resolution is not supported, ‘UNSUPPORTED’ message will be displayed.NNNNOOOOTTTTEEEE
25Basic OperationTurning On or OffStandby Setup: The AC power cord must be set up and connected to have the TV in standby modeready to be turned on. Press the ON/OFF button on the side panel of the TV to go into standby mode.1. If the TV is in standby mode, press the POWER button on the remote or the TV itself to turn the TVon.2. Press the POWER button again on the remote controller or the TV itself to turn the TV off.Channel SelectionYou can select a channel number with the CHDDor CHEEbutton or NUMBER buttons.Volume AdjustmentPress the VOL+ / VOL- button to adjust the sound level.Sound MutePress the MUTE button. The sound is switched off and the mute display appears.To cancel mute mode, press the MUTE or VOL+ / VOL- button again.Quick ViewPress the button to view the last channel you were watching.
26Basic OperationInput Selection1. Press the SOURCE button to change the input mode.2. Press the DDor EEbutton to select your desired mode.3. Press the OK button to change your selected mode.Language Selection1. Press the MENU button and then press the DDor EEbutton to select the Setup.2. Press the OK button and then press the DDor EEbuttonto select OSD Language.3. Press the FFor GGbutton to select desired your language.4. All the on screen menu will appear in the selectedlanguage.Input SourceAVS-VideoYPbPr1YPbPr2VGAHDMI1HDMI2TVSetup MENU BackSelectOSD LanguageTime SetupCaptionReset DefaultEnglish F GGGGGVideoAudioTVSetupParentalGG
27Parental ENTER Enter MENU ExitSelectGVideoAudioTVSetupParentalSetup ENTER Enter MENU ExitSelectTV ENTER Enter MENU ExitSelectAudio ENTER Enter MENU ExitSelectOn Screen MenusVideo MENU Audio MENUPicture ModeBrightnessContrastSaturationHUESharpnessColor TemperatureAdvanced VideoVideoSoft 4045505000GGENTER Enter MENU ExitSelectBalanceBassTrebleSound ModeSPDIF TypeVoicePCM04040F GGF GGParental MENUProgram BlockChange PasswordClean AllGGGTV MENUSetup MENUTuner ModeChannel ScanChannel SkipCable F GGGGOSD LanguageTime SetupCaptionReset DefaultEnglish F GGGGGVideoAudioTVSetupParentalGGGVideoAudioTVSetupParentalVideoAudioTVSetupParentalGVideoAudioTVSetupParentalYour TV’s OSD(On Screen Display) may differ slightly from what is shown in this manual.1. Press the MENU button and then use DDor EE button to select each menu.2. Press the OK button and then DDor EEor FFor GG button to display the available menus.
28Setting up TV ChannelAuto ScanAutomatically find all channels available through Antenna or Cable and stores them in memory on thechannel list.1. Press the MENU button and then press the DDor EEbutton to select the TV.2. Press the OK button and then press the DDor EEbuttonto select Tuner Mode.3. Press the FFor GGbutton to select Antenna or Cable.4. Press the DDor EEbutton to select Channel Scan.5. Press the OK button to start auto search.The TV will begin memorizing all of the availablechannels.6. Press the MENU button at any time to interrupt thememorization process.TV MENU ExitSelectTuner ModeChannel ScanChannel SkipCable F GGGGVideoAudioTVSetupParentalGGTVTuner ModeChannel ScanChannel SkipCable F GGGGVideoAudioTVSetupParentalGGENTER Scan MENU BackSelectChannel ScanVideoAudioTVSetupParentalGGMENU CancelStatus:Scanning..Analog Channels:1Digital Channels:010%Cable
29Setting up TV ChannelYou can store manually the channel in whatever order you desire. 1. Press the MENU button and then press the DDor EEbutton to select the TV.2. Press the OK button and then press the DDor EEbuttonto select Channel Skip.3. Press the OK button and then press the DDor EEbuttonto select channel you want to add or delete.If you want to skip the selected channel, press the OKbutton.4. Save the other channels in the same method.5. Press the MENU button to return to the previousmenu.Add/Delete ChannelTVTuner ModeChannel ScanChannel SkipCable F GGGGVideoAudioTVSetupParentalGGENTER Enter MENU BackSelectChannel Skip1Analog2Analog3Analog4Analog5Analog6Analog7Analog8Analog9Analog10 AnalogVideoAudioTVSetupParentalGGENTER Set MENU BackSelect
30Setting up TV ChannelYou can check the channels stored in the memory by displaying the channel list.1. Press the LIST button to display the Channel List.The channel list appears on the screen. One channel list page contains seven channels as right picture.2. Press the FFbutton to select previous page or press the GGbutton to select next page.3. Press the DDor EEbutton to select channel and then press theOK button.The screen switches to the chosen channel number.Calling the Channel ListChannel List899-1 DEF D-1101112FPage up GPage down7-1 ABC D-2Displays Broadcasting guide of received channel.1. Press the EPG button to display the EPG.The EPG appears on the screen. 2. Press the FFor GGbutton to change channel and displays broadcasting guide in the bottom of screen.EPG(Electronic Program Guide)Sunday, 3-February-2008 9:00:00 PM9:01 PM-10:09 PM Sun, 3-Feb Not Rated7 F7-1 ABC D-2 G8EToday 9:00 PM HDToday 10:00 PMToday 11:00 PMTomorrow 12:00 AM ABCTomorrow 12:50 AM HD1
31Picture Controls-If you want to select Picture Mode directly, press the button.-Every time you press the button, it will switch between Soft, Standard, Vivid or User.-When you adjust Brightness, Contrast,Saturation, HUE or Sharpness, Picture Mode changesto User.Auto Picture ControlsPicture Mode adjusts the set for the best picture appearance. Select the preset value in the Picture Mode menu.1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select Picture Mode.3. Press the FFor GGbutton to select Soft, Standard,Vivid or User.4. Press the MENU button to return to the previousmenu.SoftSelect this option to display with a soft image.StandardThe most general and natural screen display status.VividSelect this option to display with a sharp image.UserSelect this option to use the user-defined setting.NNNNOOOOTTTTEEEEVideoPicture ModeBrightnessContrastSaturationTintSharpnessColor TemperatureAdvanced VideoUser F GG60505000GGVideoAudioTVSetupParentalGGMENU BackSelect
32-Tint can not adjusts in DTV mode.NNNNOOOOTTTTEEEEManual Picture ControlsYou can adjust picture Brightness, Contrast,Saturation, HUE and Sharpness to the levels you prefer.1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select desired picture option.(Brightness, Contrast,Saturation, HUE,Sharpness)3. Press the OK button and then press the FFor GGbuttonto make appropriate adjustments.4. Press the MENU button to return to the previousmenu.BrightnessIncreases or decreases amount of white in the yourpicture.ContrastAdjusts the difference between the light and dark lev-els in the picture.SaturationAdjusts intensity of all colours.HUEAdjusts the balance between red and green levels.SharpnessAdjusts the level of sharpness in the edges betweenthe light and dark areas of the picture. The lower thelevel, the softer the image.VideoPicture ModeBrightnessContrastSaturationHUESharpnessColor TemperatureAdvanced VideoUser F GG60505000GGVideoAudioTVSetupParentalGGENTER Adjust MENU BackSelectBrightness 60Picture Controls
33Picture ControlsColor TemperatureYou can adjust to color temperature you prefer.1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select Color Temperature.3. Press the OK button and then press the FFor GG buttonto select Cool,Standard,Warm or User.4. Press the DDor EEbutton to select desired color item.5. Press the OK button and then press the FFor GGbuttonto make appropriate adjustments.6. Press the MENU button to return to the previousmenu.-When you adjust R Gain,G Gain or B Gain, Color Temperature change to User.NNNNOOOOTTTTEEEEVideoPicture ModeBrightnessContrastSaturationHUESharpnessColor TemperatureAdvanced VideoUser F GG60505000GGVideoAudioTVSetupParentalGGENTER Enter MENU BackSelectColor TemperatureColor TemperatureR GainG GainB GainStandard F GG000VideoAudioTVSetupParentalGGMENU BackSelectR Gain 0
34Digital Noise ReductionRemoving the noise up to the point where it does not damage the original picture.1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select Advanced Video.3. Press the OK button and then press the DDor EEbuttonto select DNR.4. Press the FFor GGbutton to select Off, Low, Medium,Strong or Auto.5. Press the MENU button to return to the previousmenu.OffTurns the screen noise reduction function off.LowReduces screen noise at a low level.MediumReduces screen noise at a medium level.StrongReduces screen noise at a high level.AutoAdjusts automatically screen noise according toreceived signal.VideoDNRBlack Level ExtenderWhite Peak LimiterCTIFlash ToneAdaptive Luma ControlMediumOffOnLowOffOnF GGF GGF GGF GGF GGF GGVideoAudioTVSetupParentalGGENTER Enter MENU BackSelectAdvanced Video
35Advanced VideoVideoDNRBlack Level ExtenderWhite Peak LimiterCTIFlash ToneAdaptive Luma ControlMediumOffOnLowOffOnF GGF GGF GGF GGF GGF GGVideoAudioTVSetupParentalGGENTER Enter MENU BackSelectBlack Level Extender?????1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select Advanced Video.3. Press the OK button and then press the DDor EEbuttonto select Black Level Extender.4. Press the FFor GGbutton to select On or Off.5. Press the MENU button to return to the previousmenu.
36Advanced VideoVideoDNRBlack Level ExtenderWhite Peak LimiterCTIFlash ToneAdaptive Luma ControlMediumOffOnLowOffOnF GGF GGF GGF GGF GGF GGVideoAudioTVSetupParentalGGENTER Enter MENU BackSelectWhite Peak Limiter?????1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select Advanced Video.3. Press the OK button and then press the DDor EEbuttonto select White Peak Limiter.4. Press the FFor GGbutton to select On or Off.5. Press the MENU button to return to the previousmenu.
37Advanced VideoVideoDNRBlack Level ExtenderWhite Peak LimiterCTIFlash ToneAdaptive Luma ControlMediumOffOnLowOffOnF GGF GGF GGF GGF GGF GGVideoAudioTVSetupParentalGGENTER Enter MENU BackSelectCTI?????1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select Advanced Video.3. Press the OK button and then press the DDor EEbuttonto select CTI.4. Press the FFor GGbutton to select Off, Low, Mediumor Strong.5. Press the MENU button to return to the previousmenu.
38Advanced VideoVideoDNRBlack Level ExtenderWhite Peak LimiterCTIFlash ToneAdaptive Luma ControlMediumOffOnLowOffOnF GGF GGF GGF GGF GGF GGVideoAudioTVSetupParentalGGENTER Enter MENU BackSelectFlash Tone?????1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select Advanced Video.3. Press the OK button and then press the DDor EEbuttonto select Flash Tone.4. Press the FFor GGbutton to select On or Off.5. Press the MENU button to return to the previousmenu.
39Advanced VideoVideoDNRBlack Level ExtenderWhite Peak LimiterCTIFlash ToneAdaptive Luma ControlMediumOffOnLowOffOnF GGF GGF GGF GGF GGF GGVideoAudioTVSetupParentalGGENTER Enter MENU BackSelectAdaptive Luma Control?????1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select Advanced Video.3. Press the OK button and then press the DDor EEbuttonto select Adaptive Luma Control.4. Press the FFor GGbutton to select On or Off.5. Press the MENU button to return to the previousmenu.
40Sound ControlsAuto Sound ControlsSound Mode lets you enjoy the best sound without any special adjustment because the set sets theappropriate sound options.1. Press the MENU button and then press the DDor EEbutton to select the Audio.2. Press the OK button and then press the DDor EEbuttonto select Sound Mode.3. Press the FFor GGbutton to select Voice, Concert,Jazz or User.4. Press the MENU button to return to the previousmenu.Voice???Concert???Jazz????UserSelect this option to use the user-defined audio settings.-If you want to select Sound Mode directly, press the button.-Every time you press the button, it will switch between Voice, Concert, Jazz and User.-When you adjust Bass or Treble, Sound Mode changes to User.NNNNOOOOTTTTEEEEAudioBalanceBassTrebleSound ModeSPDIF TypeVoiceoff04040F GGF GGVideoAudioTVSetupParentalGGMENU BackSelect
41Sound ControlsManual Sound ControlsThis is the function to adjust the audio condition in the way the user wants.1. Press the MENU button and then press the DDor EEbutton to select the Audio.2. Press the OK button and then press the DDor EEbuttonto select desired picture option.(Bass, Treble, Balance) 3. Press the OK button and then press the FFor GGbuttonto make appropriate adjustments.4. Press the MENU button to return to the previousmenu.BassThis adjusts the range of the low pitch sound.TrebleThis adjusts the range of the high pitch sound.BalanceAdjust the sound balance of speaker to the levels youprefer.AudioBalanceBassTrebleSound ModeSPDIF TypeMoviesoff04040F GGF GGVideoAudioTVSetupParentalGGMENU BackSelectENTER AdjustBalance 0
42Ouput the audio signal with the digital signal for the user to enjoy the sound more vividly.SPDIFAudioBalanceBassTrebleSound ModeSPDIF TypeMoviesOff04040F GGF GGVideoAudioTVSetupParentalGGMENU BackSelect1. Press the MENU button and then press the DDor EEbutton to select the Audio.2. Press the OK button and then press the DDor EEbuttonto select SPDIF Type.3. Press the FFor GGbutton to select Off, Dolby Digital,or PCM.4. Press the MENU button to return to the previousmenu.Sound ControlsOffWhen it is specified as default, it is not output withthe digital audio signal.Dolby DigitalIt can output the digital audio signal.PCMThis mode is used only for the audio CD signal.
43Sound ControlsSTEREO/SAP BROADCAST SETUPThis TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompaniesthe stereo program if the station transmits an additional sound signal as well as the original one andwhen you select Stereo or SAP on the remote control.Mono sound is automatically received if the broadcast is only in Mono; even though Stereo or SAP hasbeen selected.Select Mono if you want to listen to the mono sound in remote areas during stereo/SAP broadcasting.Stereo or SAP can be received in Analog channel.1. Use the MTS button to select your desired MTS mode in analog signal. Each time you press the MTS button, Mono, Stereo, or SAP appear in turn.If other languages available on the digital signal, select them with the MTS button.2. Press EXIT button to save and return to TV viewing.
44Time SettingTime Zone SettingYou can set the Time Zone for your local area.This is operated from the Auto Synchronization.1. Press the MENU button and then press the DDor EEbutton to select the Setup.2. Press the OK button and then press the DDor EEbuttonto select Time Setup.3. Press the OK button and then press the DDor EEbuttonto select Time Zone.4. Press the FFor GGbutton to select your viewing areatime zone.(Eastern Time, Indiana, Central Time, MountainTime, Arizona, Pacific Time, Alaska, Hawaii)5. Press the MENU button to return to the previousmenu.Setup MENU BackSelectOSD LanguageTime SetupCaptionReset DefaultEnglish F GGGGGVideoAudioTVSetupParentalGGTime Setup MENU BackSelectTime ZoneTimeSleep TimerEastern TimeOffF GGGF GGVideoAudioTVSetupParentalGGENTER Enter
45Time SettingAuto Time SettingThe time is set automatically from a digital channel signal.The digital channel signal includes information for the current time provided by the broadcasting station.Set the time manually if the current time is set incorrectly by the Auto Synchronization function.1. Press the MENU button and then press the DDor EEbutton to select the Setup.2. Press the OK button and then press the DDor EEbuttonto select Time Setup.3. Press the OK button and then press the DDor EEbuttonto select Time.4. Press the OK button and then press the DDor EEbuttonto select Auto Synchronization.5. Press the FFor GGbutton to select On.6. Press the MENU button to return to the previousmenu.-If Auto Synchronization is selected to On, Date and Time menu are cannot be adjusted.NNNNOOOOTTTTEEEESetup MENU BackSelectOSD LanguageTime SetupCaptionReset DefaultEnglish F GGGGGVideoAudioTVSetupParentalGGTime SetupTime ZoneTimeSleep TimerEastern TimeOffF GGGF GGVideoAudioTVSetupParentalGGTime MENU BackSelectAuto SynchronizationDateTimeTimerPower On TimerPower Off TimerVideoAudioTVSetupParentalGGOn2008/01/0100:00:00Off 00:00:0000:00:00F GGF GGENTER EnterMENU BackSelectENTER Enter
46Manual Time SettingIf the current time setting is wrong, reset the clock manually.1. Press the MENU button and then press the DDor EEbutton to select the Setup.2. Press the OK button and then press the DDor EEbuttonto select Time Setup.3. Press the OK button and then press the DDor EEbuttonto select Time.4. Press the OK button and then press the DDor EEbuttonto select Auto Synchronization.5. Press the FFor GGbutton to select Off.6. Press the DDor EEbutton to select Date or Time.7. Press the FFor GGbutton to move the position and usenumber buttons to set present date or time.8. Press the MENU button to return to the previousmenu.Setup MENU BackSelectOSD LanguageTime SetupCaptionReset DefaultEnglish F GGGGGVideoAudioTVSetupParentalGGTime Setup MENU BackSelectTime ZoneTimeSleep TimerEastern TimeOffF GGGF GGVideoAudioTVSetupParentalGGTime MENU BackSelectAuto SynchronizationDateTimeTimerPower On TimerPower Off TimerVideoAudioTVSetupParentalGGOff2008/01/0100:00:00Off 00:00:0000:00:00F GGF GGENTER EnterENTER EnterTime Setting
47Time SettingAuto On/Off Time SettingThe timer function operates only if the current time has been set.The TV turns on/off automatically with the Power On/Off Timer function.1. Press the MENU button and then press the DDor EEbutton to select the Setup.2. Press the OK button and then press the DDor EEbuttonto select Time Setup.3. Press the OK button and then press the DDor EEbuttonto select Time.4. Press the OK button and then press the DDor EEbuttonto select Timer.5. Press the FFor GGbutton to select On.If Timer is selected to Off, Power On Timer andPower Off Timer menu are cannot be adjusted.6. Press the DDor EEbutton to select Power On Timer orPower Off Timer.7. Press the FFor GGbutton to move the position and usenumber buttons to set TV on or off time.8. Press the MENU button to return to the previousmenu.Setup MENU BackSelectOSD LanguageTime SetupCaptionReset DefaultEnglish F GGGGGVideoAudioTVSetupParentalGGTime Setup MENU BackSelectTime ZoneTimeSleep TimerEastern TimeOffF GGGF GGVideoAudioTVSetupParentalGGTime MENU BackSelectAuto SynchronizationDateTimeTimerPower On TimerPower Off TimerVideoAudioTVSetupParentalGGOff2008/01/0100:00:00On00:00:0000:00:00F GGF GGENTER EnterENTER Enter
481. Press the MENU button and then press the DDor EEbutton to select the Setup.2. Press the OK button and then press the DDor EEbuttonto select Time Setup.3. Press the OK button and then press the DDor EEbuttonto select Sleep Timer.4. Press the FFor GGbutton to select desired sleep time.The timer begins to count down from the number ofminutes selected.5. Press the MENU button to return to the previousmenu.-If you want to select Sleep Timer directly, press the SLEEP button.-Every time you press the button, it will switch between Off,5,10, 15, 30, 45, 60, 90, 120,180 and 240.NNNNOOOOTTTTEEEESleep TimerYou don’t have to remember to switch the set off before you go to sleep.The sleep timer automatically switches the set to standby after the preset time elapses.Setup MENU BackSelectOSD LanguageTime SetupCaptionReset DefaultEnglish F GGGGGVideoAudioTVSetupParentalGGTime Setup MENU BackSelectTime ZoneTimeSleep TimerEastern TimeOffF GGGF GGVideoAudioTVSetupParentalGGENTER EnterTime Setting
49CaptionsClosed Caption-AnalogThe Analog Caption function operates when watching regular analog channels. Analog caption displays information at any position on the screen and is usually the program’s dialog.1. Press the MENU button and then press the DDor EEbutton to select the Setup.2. Press the OK button and then press the DDor EEbuttonto select Caption.3. Press the OK button and then press the DDor EEbuttonto select Analog Closed Caption.4. Press the FFor GGbutton repeatedly to select Off, CC1,CC2, CC3,CC4,TEXT1,TEXT2, TEXT3 or TEXT4.5. Press the MENU button to return to the previousmenu.CaptionThe term for the words that scroll across the bottomof the TV screen; usually the audio portion of the pro-gram provided for the hearing impaired.TEXTThe term for the words that appear in a large blackframe and almost cover the entire screen; usuallymessages provided by the broadcaster.Setup MENU BackSelectOSD LanguageTime SetupCaptionReset DefaultEnglish F GGGGGVideoAudioTVSetupParentalGGCaption MENU BackSelectAnalog Closed CaptionDigital Closed CaptionDigital Caption StyleOffOffF GGF GGGVideoAudioTVSetupParentalGG-If you want to select Caption directly, press the CC button.NNNNOOOOTTTTEEEEENTER Enter
50Closed Caption-DigitalThe Digital Caption function operates on digital channels. Choose the language you want the DTV captions to appear in.1. Press the MENU button and then press the DDor EEbutton to select the Setup.2. Press the OK button and then press the DDor EEbuttonto select Caption.3. Press the OK button and then press the DDor EEbuttonto select Digital Closed Caption.4. Press the FFor GGbutton repeatedly to select Off,SERVICE1,SERVICE2, SERVICE3,SERVICE4,SERVICE5 or SERVICE6.5. Press the MENU button to return to the previousmenu.Setup MENU BackSelectOSD LanguageTime SetupCaptionReset DefaultEnglish F GGGGGVideoAudioTVSetupParentalGGCaption MENU BackSelectAnalog Closed CaptionDigital Closed CaptionDigital Caption StyleOffOffF GGF GGGVideoAudioTVSetupParentalGGENTER EnterCaptions
51CaptionsClosed Caption OptionsCustomize the DTV captions that appear on your screen.1. Press the MENU button and then press the DDor EEbutton to select the Setup.2. Press the OK button and then press the DDor EEbuttonto select Caption.3. Press the OK button and then press the DDor EEbuttonto select Digital Caption Style.4. Press the OK button and then press the DDor EEbuttonto select Caption Style.5. Press the FFor GGbutton to select Custom.6. Press the DDor EEbutton to select desired captionoption. (Font Size, Font Color, Font Opacity, BackgroundColor, Background Opacity, Window Color,Window Opacity)7. Press the FFor GGbutton to customize your preference. 8. Press the MENU button to return to the previousmenu.Font SizeSet the size the words will appear in.Font ColorChoose a color for the text.Font OpacitySpecify the opacity for the text color.Background ColorSelect a background color.Background OpacitySelect the opacity for the background color.Window ColorSelect a color for the edges.Window OpacitySelect the opacity for the edges.-If Caption Style is selected to As Broadcaster, Caption Options are cannot be adjusted.NNNNOOOOTTTTEEEECaption MENU BackSelectAnalog Closed CaptionDigital Closed CaptionDigital Caption StyleOffOffF GGF GGGVideoAudioTVSetupParentalGGDigital Caption Style MENU BackSelectCaption StyleFont SizeFont ColorFont OpacityBackground ColorBackground OpacityWindow ColorWindow OpacityCustomLargeWhiteSolidBlackSolidBlackTrasparentF GGF GGF GGF GGF GGF GGF GGF GGVideoAudioTVSetupParentalGGENTER Enter
52Reset DefaultUse to quickly reset all the menu options to their original factory preset values.This function deletes all TV channel.1. Press the MENU button and then press the DDor EEbutton to select the Setup.2. Press the OK button and then press the DDor EEbuttonto select Reset Default.3. Press the FFor GGbutton and then press the FFor GGbutton to select OK.4. Press the OK button to reset.5. Reset the menu options to original values.6. Press the MENU button to return to the previousmenuSetup MENU BackSelectOSD LanguageTime SetupCaptionReset DefaultEnglish F GGGGGVideoAudioTVSetupParentalGGAre you sure?OK CancelReset
53Parental ControlEnter the your passwordParental Control can be used to block specific channels, ratings and other viewing sources.Set up blocking schemes to block specific channels, ratings, and external viewing sources.Apassword is required to gain access to this menu.1. Press the MENU button and then press the DDor EEbutton to select the Parental.2. Press the OK button and then enter password asrequested.3. The TV is set up with the initial password “0-0-0-0”.Parental MENU BackSelectPasswordVideoAudioTVSetupParentalGGENTER EnterChange Password MENU BackNew PasswordConfirm PasswordVideoAudioTVSetupParentalGGSet PasswordChange the password by inputting a new password twice.1. After inputting the password, press the DDor EEbuttonto select Change Password.2. Press the OK button and then select any 4 digits foryour new password and enter the them on the NewPassword.3. As soon as the 4 digits are entered, re-enter the same4 digits on the Confirm Password.4. Then your changed password has been memorized.5. Press the MENU button to return to the previousmenuParental MENU BackSelectProgram BlockChange PasswordClean AllGGGVideoAudioTVSetupParentalGGENTER Enter
54Rating Enable/DisableEnables or disables the blocking scheme you set up previously.1. After inputting the password, press the DDor EEbuttonto choose Program Block.2. Press the OK button and then press the DDor EEbuttonto select Rating Enable.3. Press the FFor GGbutton to select On or Off.When you select On, the Program Block menus areenable.4. Press the MENU button to return to the previousmenuParental MENU BackSelectProgram BlockChange PasswordClean AllGGGVideoAudioTVSetupParentalGGENTER EnterProgram Block MENU BackSelectRating EnableU.S. TV RatingsU.S. Movie RatingsCanadian English RatingsCanadian French RatingsOpen V-ChipOn F GGGGGGGVideoAudioTVSetupParentalGGParental Control
55Parental ControlTV Ratings for USAPrevents children from watching certain children's TV programs, according to the ratings limit set. Thechildren rating does not apply to other TV programs. Unless you block certain TV programs intended formature audiences in the TV Rating - sub menu, your children can view those programs.1. After inputting the password, press the DDor EEbuttonto choose Program Block.2. Press the OK button and then press the DDor EEbuttonto select U.S. TV Rating.3. Press the OK button.4. Press the DDor EEor FFor GGbuttons to choose and OKbutton to set up the menu options for U.S. TVRatings.5. Press the MENU button to return to the previousmenuParental MENU BackSelectProgram BlockChange PasswordClean AllGGGVideoAudioTVSetupParentalGGENTER EnterProgram Block MENU BackSelectRating EnableU.S. TV RatingsU.S. Movie RatingsCanadian English RatingsCanadian French RatingsOpen V-ChipOn F GGGGGGGVideoAudioTVSetupParentalGGENTER EnterU.S TV Ratings MENU BackSelectTV-YTV-Y7TV-GTV-PGTV-14TV-MAAllowed RatingADL S VFVVideoAudioTVSetupParentalGGBlocked RatingENTER Set
56TV (FCC) Content Sub-Categories:V:Violence.S:Violence.L:Offensive language.V:Violence.D:Dialog...sexual innuendo.FV:Fantasy or cartoon violence.TV-MAMature audiences only. This program may contain mature themes,profane language, graphic violence andexplicit sexual content.TV-14Parents strongly cautioned. This program may contain sophisticatedthemes, sexual content, strong language andmore intense violence.TV-PGParental guidance suggested. The program may contain infrequent coarselanguage, limited violence, some suggestivesexual dialog and situations.TV-GGeneral audience. This contains little or no violence, no stronglanguage, and little or no sexual dialog or situ-ations.TV-Y7Directed for older children. Themes and elements in this program mayinclude mild physical or comedic violence, ormay frighten children under the age of seven.TV-YAll children. The themes and elements in this program arespecifically designed for a very young audi-ence, including children from ages two – six.TV (FCC) Age CategoriesParental Control
57Parental ControlMovie RatingsBlocks movies according to the movie ratings limits specified, so children cannot view certain movies.You can set the ratings limit by blocking out all the movies with the ratings above a specified level. Keep in mind that the movie ratings limit only applies to movies shown on TV, not TV programs, such assoap operas.1. After inputting the password, press the DDor EEbuttonto choose Program Block.2. Press the OK button and then press the DDor EEbuttonto select U.S. Movie Rating.3. Press the OK button.4. Press the DDor EEbuttons to choose and OK button toset up the menu options for U.S. Movie Ratings.5. Press the MENU button to return to the previousmenuParental MENU BackSelectProgram BlockChange PasswordClean AllGGGVideoAudioTVSetupParentalGGENTER EnterProgram Block MENU BackSelectRating EnableU.S. TV RatingsU.S. Movie RatingsCanadian English RatingsCanadian French RatingsOpen V-ChipOn F GGGGGGGVideoAudioTVSetupParentalGGENTER EnterU.S Movie Ratings MENU BackSelectGPGPG-13RNC-17XAllowed RatingVideoAudioTVSetupParentalGGBlocked RatingENTER SetG General Audience.PGParental guidance suggested.PG-13Parents strongly cautioned.RRestricted.NC-17No one 17 and under admitted.XAdults only.The MPAA Rating System (Movies)-G If you set PG-13 : G and PG movies will be available, PG-13, R, NC-17 and X will be blocked.NNNNOOOOTTTTEEEE
58TV Rating English for CanadaSelecting canadian english language rating system.1. After inputting the password, press the DDor EEbuttonto choose Program Block.2. Press the OK button and then press the DDor EEbuttonto select Canadian English Ratings.3. Press the OK button.4. Press the DDor EEbuttons to choose and OK button toset up the menu options for Canadian EnglishRatings.5. Press the MENU button to return to the previousmenuParental MENU BackSelectProgram BlockChange PasswordClean AllGGGVideoAudioTVSetupParentalGGENTER EnterProgram Block MENU BackSelectRating EnableU.S. TV RatingsU.S. Movie RatingsCanadian English RatingsCanadian French RatingsOpen V-ChipOn F GGGGGGGVideoAudioTVSetupParentalGGENTER EnterCanadian English Ratings MENU BackSelectCC8+GPG14+18+Allowed RatingVideoAudioTVSetupParentalGGBlocked RatingENTER SetCChildrenC8+Children eight years and olderGGeneral programming, suitable for all audiencesPGParental Guidance 14+Viewers 14 years and older18+Adult programmingCanadian English RatingsParental Control
59Parental ControlTV Rating French for CanadaSelecting canadian french language rating system.1. After inputting the password, press the DDor EEbuttonto choose Program Block.2. Press the OK button and then press the DDor EEbuttonto select Canadian French Ratings.3. Press the OK button.4. Press the DDor EEbuttons to choose and OK button toset up the menu options for Canadian FrenchRatings.5. Press the MENU button to return to the previousmenuParental MENU BackSelectProgram BlockChange PasswordClean AllGGGVideoAudioTVSetupParentalGGENTER EnterProgram Block MENU BackSelectRating EnableU.S. TV RatingsU.S. Movie RatingsCanadian English RatingsCanadian French RatingsOpen V-ChipOn F GGGGGGGVideoAudioTVSetupParentalGGENTER EnterCanadian French Ratings MENU BackSelectG8 ans+13 ans+16 ans+18 ans+Allowed RatingVideoAudioTVSetupParentalGGBlocked RatingENTER SetGGeneral8 ans+General-Not convenient for little children13 ans+Not convenient for children of 13 years and younger16 ans+Not convenient for children of 16 years and younger18 ans+This programs is only for adultCanadian French Ratings
60Open V-Chip??????1. After inputting the password, press the DDor EEbuttonto choose Program Block.2. Press the OK button and then press the DDor EEbuttonto select Open V-Chip.3. Press the OK button twice.4. Press the DDor EEbuttons to choose the menu optionsfor Open V-Chip.5. Press the OK button.5. Press the MENU button to return to the previousmenuParental MENU BackSelectProgram BlockChange PasswordClean AllGGGVideoAudioTVSetupParentalGGENTER EnterProgram Block MENU BackSelectRating EnableU.S. TV RatingsU.S. Movie RatingsCanadian English RatingsCanadian French RatingsOpen V-ChipOn F GGGGGGGVideoAudioTVSetupParentalGGENTER EnterCanadian French Ratings MENU BackSelectG8 ans+13 ans+16 ans+18 ans+Allowed RatingVideoAudioTVSetupParentalGGBlocked RatingENTER SetParental Control
61Setting the PC Mode-Select the VGA mode by pressing SOURCE button -If you want to select Picture Mode directly, press the button.-Every time you press the button, it will switch between Soft, Standard, Vivid or User.-When you adjust Brightness, Contrast, Picture Mode changes to User.Auto Picture ControlsPicture Mode adjusts the set for the best picture appearance. Select the preset value in the Picture Mode menu.1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select Picture Mode.3. Press the FFor GGbutton to select Soft, Standard,Vivid or User.4. Press the MENU button to return to the previousmenu.SoftSelect this option to display with a soft image.StandardThe most general and natural screen display status.VividSelect this option to display with a sharp image.UserSelect this option to use the user-defined setting.NNNNOOOOTTTTEEEEVideoPicture ModeBrightnessContrastColor TemperatureAdvanced VideoVGAUser F GG6050GGGVideoAudioTVSetupParentalGGMENU BackSelect
62Manual Picture ControlYou can adjust picture Brightness and Contrast to the levels you prefer.1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select desired picture option.(Brightness, Contrast)3. Press the OK button and then press the FFor GGbuttonagain to make appropriate adjustments.4. Press the MENU button to return to the previousmenu.BrightnessIncreases or decreases amount of white in the yourpicture.ContrastAdjusts the difference between the light and dark lev-els in the picture.-Select the VGA mode by pressing SOURCE button NNNNOOOOTTTTEEEEVideoPicture ModeBrightnessContrastColor TemperatureAdvanced VideoVGACustom F GG6050GGGVideoAudioTVSetupParentalGGMENU BackSelectENTER AdjustBrightness 60Setting the PC Mode
63Setting the PC ModeColor TemperatureYou can adjust to color temperature you prefer.1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select Color Temperature.3. Press the OK button and then press the FFor GG buttonto select Cool,Standard,Warm or User.4. Press the DDor EEbutton to select desired color item.5. Press the OK button and then press the FFor GGbuttonto make appropriate adjustments.6. Press the MENU button to return to the previousmenu.-When you adjust R Gain,G Gain or B Gain, Color Temperature change to User.NNNNOOOOTTTTEEEEVideoColor TemperatureR GainG GainB GainStandard F GG000VideoAudioSetupParentalGGMENU BackSelectR Gain 0VideoPicture ModeBrightnessContrastColor TemperatureAdvanced VideoVGAUser F GG6050GGGVideoAudioSetupParentalGGMENU BackSelectENTER Enter
64VideoPicture ModeBrightnessContrastColor TemperatureAdvanced VideoVGACustom F GG6050GGGVideoAudioSetupParentalGGMENU BackSelectENTER EnterVideoAuto AdjustH.PositionV.PositionPhaseClockG60500100VideoAudioSetupParentalGGMENU BackSelectENTER EnterAuto AdjustmentThis function is for the automatic adjustment of the screen position, clock, phase and scale in pc mode.The displayed image will disappear for a few seconds while the auto configuration is in progress.Although the image is still not correct, your set is functioning properly but needs further adjustment.1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select VGA.3. Press the OK button and then press the DDor EEbuttonto select Auto Adjust.4. Press the OK button to start auto adjust.5. If picture needs to be adjusted more after Auto Adjust,you can adjust manually.For more information on Manual Adjust, refer to thenext page.Setting the PC Mode
65Setting the PC ModeManual AdjustmentIf the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust thepicture phase manually.To correct the screen size, adjust Clock.1. Press the MENU button and then press the DDor EEbutton to select the Video.2. Press the OK button and then press the DDor EEbuttonto select VGA.3. Press the OK button and then press the DDor EEbuttonto select H.Position or V.Position.4. Press the OK button and then press the FFor GGbuttonto make appropriate adjustments.5. Press the DDor EEbutton to select Phase or Clock.6. Press the OK button and then press the FFor GGbuttonto make appropriate adjustments.7. Press the MENU button to return to the previousmenu.H.PositionThis function is to adjust horizontal position of screen.V.PositionThis function is to adjust vertical position of screen.PhaseThis function allows you to remove any horizontalnoise and clear or sharpen the image of characters.ClockThis function is to minimize any vertical bars orstripes visible on the screen background.And the horizontal screen size will also change.VideoPicture ModeBrightnessContrastColor TemperatureAdvanced VideoVGACustom F GG6050GGGVideoAudioSetupParentalGGMENU BackSelectENTER EnterVideoAuto AdjustH.PositionV.PositionPhaseClockG60500100VideoAudioSetupParentalGGMENU BackSelectENTER AdjustH.Position 60
66Special FunctionsPicture FormatYou can watch the screen in various picture formats; 4:3 Zoom, Wide.If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted onthe screen and remain visible.Repeatedly press the ZOOM button to select your desired picture format.A4:3Following selection will lead you to view a picture with an original 4:3 aspect ratio, with gray barsappearing at both the left and right sides.AZoomFollowing selection will lead you to view the picture without any alternation, while filling the entirescreen.However, the top and bottom portions of the picture will be cropped.AWideYou can enjoy the cinema or general TV program through the 16:9 mode.The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so thatthe screen 16:9 is full.
67Special FunctionsFreezing the current pictureYou can freeze the picture when watching a television program simply by pressing the FREEZEbutton.To return to normal viewing, press it FREEZE button again.Play Screen Stop Screen
68SpecificationModelDimensionWeightHorizontalHeightThickness918.0 mm698.0 mm296.0 mm21.5 kg1,800:1 (25/100 White Window)500 cd/m2852 (H) x 480 (V)16.7M colors10W + 10W160WO HDMI / DVI1 INO HDMI2 INO RGB IN(PC)O VIDEO1 INO S-VIDEO INO COMPONENT1 VIDEO INO COMPONENT2 VIDEO INO COMPONENT1 AUDIO INO COMPONENT2 AUDIO INO VIDEO1 AUDIO INO AUDIO IN (RGB / DVI)O SPDIF OUTO ANTENNA INContrast RationBrightnessPanel ResolutionDisplay ColorAudio OutputConsumptionExternal PortPT32U44H
69TroubleshootingProblemNo picture on screen.The remote control doesn’t work.Picture appears slowly, afterswitching on.No or Poor colorHorizontal/Vertical bars or picture shakingUnusual sound from inside theset.OCheck whether the set is turned on.OPower cord inserted into wall outlet?OPlug another product’s power cord into the wall outletwhere the set’s power cord was plugged in.OCheck to see if there is any object between the set andthe remote control causing obstruction.OCheck to see if the batteries are installed with the correctpolarities.OInstall new batteries.OThis is normal as the image is muted during the start upprocess of the set. Please contact your service center, ifthe picture has not appeared after five minutes.OSelect color in the Picture menu and press the FF,GGbut-ton.OCheck for local interference such as an electrical appli-ance or power tool.OAchange in ambient humidity or temperature may resultin an unusual noise at the time of switching off or on ofthe set and does not indicate a fault with the set.Check Point
PLASMA TVPLASMA TVP/NO : 3350GDKM00???GPN08MA008E

Navigation menu