KINEXON KNX-IREC1 UWB Anchor User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	3582551
Application ID	HR9lW/HB2NAllPw2wNpT3w==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	76.59kB (957385 bits)
Date Submitted	2017-09-27 00:00:00
Date Available	2018-04-11 00:00:00
Creation Date	2017-06-22 13:52:47
Producing Software	LibreOffice 5.1
Document Lastmod	0000-00-00 00:00:00
Document Title	Users manual
Document Creator	Writer
Document Author:	My

Fact Sheet
KINEXON RECEIVER
User Manual – Indoor Application
Version 1.2
RECEIVER (Kinexon Receiver):
Material:
ABS
Dimensions:
126 x 98 x 34 mm
Weight:
200 g / 505 g (with battery)
Power Supply:
Battery and/or cable (5-30 V), PoE (48V)
Battery Lifetime:
35 hours (active), 200 days (standby)
Charging:
10 hours (100%), 5 hours (50%), 12-24 V DC
Temperature:
-40 – 75 C
Communication:
2.4/5 GHz (Wifi), 3.23738-6.81013 GHz (UWB), 100Base-TX Ethernet
SETUP
Receiver Mounting
The Kinexon Receiver will only be placed indoors, where it will be usually
mounted on walls or on tripods. Kinexon offers dedicated mounting mechanisms.
Alternatively, the Receivers can be mounted on tripods in case that mounting on
walls is not possible.
receiver
Regulatory and Legal Information
The Kinexon Receiver has been designed to be in compliance with both the U.S.
FCC Part 15 subpart F regulations, sections 15.517 and 15.521 and with the
European Union ETSI EN 302 065 standards. Two different versions of the Kinexon
Receiver are available, one version supports the FCC emissions mask (Region 1)
and the second supports the ETSI standard mask (Region 2).
©Kinexon 2015. This document is confidential and contains information which is proprietary to Kinexon GmbH. No reproduction
is permitted without prior express written permission of the author (info@kinexon.com).
- CONFIDENTIAL -
Disclaimer
The information in this document is subject to change without notice. Kinexon
GmbH assumes no responsibility for inaccuracies or omissions and specifically
disclaims any liabilities, losses, or risks, personal or otherwise, incurred as a
consequence, directly or indirectly, of the use or application of any of the
contents of this document. For the latest documentation, contact Kinexon GmbH.
Intended Use
This manual describes the setup and use of the Kinexon Receiver. Use this
product only for the purpose it was designed for.
FCC Compliance
This device complies with 47 CFR Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
The user is cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void the user’s authority to operate
the equipment.
This device may not be employed for the operation of toys. Operation onboard an
aircraft, a ship or a satellite is prohibited.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:




Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
©Kinexon 2015. This document is confidential and contains information which is proprietary to Kinexon GmbH. No reproduction
is permitted without prior express written permission of the author (info@kinexon.com).
- CONFIDENTIAL -
Important Notice
This equipment may only be operated indoors. Operation outdoors is in violation
of 47 U.S.C. 301 and could subject the operator to serious legal penalties.
The Kinexon Receiver will only operate (i.e. transmit UWB signals) when activated
within an indoor Kinexon network. This network needs to be professionally
installed, and must be configured to cover only the volume indoors, preventing
the Kinexon Receiver from emitting UWB signals outdoors. Contact Kinexon
GmbH if you are unsure about the extent of coverage of your network system.
Safety Information
• Read and follow all instructions before using the Kinexon Receiver.
• Never open the case of the Kinexon Receiver. There are no user serviceable
parts or replaceable parts inside the case.
• Do not use the Kinexon Receiver if it has been damaged.
©Kinexon 2015. This document is confidential and contains information which is proprietary to Kinexon GmbH. No reproduction
is permitted without prior express written permission of the author (info@kinexon.com).
- CONFIDENTIAL -

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 4
Language                        : de-DE
Author                          : My
Creator                         : Writer
Producer                        : LibreOffice 5.1
Create Date                     : 2017:06:22 13:52:47+02:00

EXIF Metadata provided by EXIF.tools