KINGLINE TECHNOLOGY X100 Wireless controller User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3773756
Application ID	pHV9YOX3oMjux+zc11it9A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	15.31kB (191389 bits)
Date Submitted	2018-03-08 00:00:00
Date Available	2018-03-08 00:00:00
Creation Date	2018-02-08 13:52:42
Document Lastmod	2018-02-28 11:34:36
Document Title	Users Manual
Document Creator	WPS Office
Document Author:	Administrator

Instruction Manual
Wireless game controller(X100) is compatible with Android/IOS smart phone, tablet,
IPTV box, smart TV and Window PC. Supporting mode: Android, iOS, iCade,PS3
Please kindly ensure that device system and controller is compatible before usage.
Mode LED indicating:
Wirless mode:
Android: LED 1
Multimedia: LED 1 + LED2
iCade：LED4
2.4G mode:
PC-xinput:LED2+LED3
PC-Dinput:LED1+LED2+LED3
PS3: LED used by users
Wired mode:
PC-xinput:LED2+LED3
PC-Dinput:LED1+LED2+LED3
PS3: LED used by users
Weless Connection
A) Android
1) Turn on the controller.
2) Press both X and HOME together (5 seconds or more) for pairing (LED1 is
flashing),
3) Go to your device Setting/Bluetooth and find “Mikiman-M1”, selected for
pairing with controller.
4) After success connect, LED 1 is long bright.
B) iCade
1) Turn on the controller.
2) Press both B and HOME together (5 seconds or more) for pairing (LED3 is
flashing),
3) Go to your device Setting/Bluetooth and finding “Gamepad”， selected for
pairing with controller.
4) After success connect, LED 3 is long bright.
C) Multimedia mode:
1) Under Android mode, short press SELECT+X for switching to Multimedia
mode.
2) LED 1+LED2 is long bright upon success switching.
3) Key function (there may have different upon different mode):
Left arcade stick: mouse cursor moving (fast)
Right arcade stick: mouse cursor moving (slow)
2.4G Connection
1) PC-Xiput:press HOME+Y , LED 1+LED2 is long bright upon success
switching. Insert the 2.4G connector, After success connect, LED
3+LED2 is long bright upon success switching. Press both X and HOME
together (5 seconds or more) for pairing(LED1+LED2+LED3 is long
bright upon success switching),this mode :Dinput mode
5) PS3: press HOME+SELECT together (5 seconds or more) for pairing
(LED1+LED2+LED3+LED4 is flashing), Insert the 2.4G connector, After
success connect, LED 1+LED2 +LED3+LED4 is long bright upon success
switching. Press HOME for pairing LED used by users
Wired Connection
1.WIRED Connection PC: Connect a computer directly
with a data line ,
LED 3+LED2 is long bright upon success switching.
Entering the Xinput mode, Press both SELECT and START together (5
seconds or more) for pairing( LED1+LED2+LED3 is long bright upon success
switching),this mode :Dinput mode
WIRED Connection PS3: Before inserting the data line,
Press SELECT, After success connect
Functions:
D) Battery indicating
1) Low battery: LED4 is flashing fast. Please charge the controller
immediately.
2) Charging: LED4 is flashing slow. Long bright after full charged
E) System compatibility
1) Android mode:
a) Smart phone and tablet with Android 4.0 or above and support OTG
function.
b) Smart TV and IPTV box
c) Compatible with game under Android system or related operation system
d) Connection mode:wireless、wired and 2.4G connector
2) iCade mode:
a) iCade game under iOS system.
b) Visit APP Store, search iCade and game such as Temple Run, Rush City
and Akane Lite will be available for download.
D) Turbo function
1)
2)
3)
4)
5)
Turbo function is working under Android, and iCade mode.
Supporting Turbo key: A, B, X, Y, L1, L2, R1, R2, L3, R3, SELECT, START.
Press Supported key and TURBO together to active Turbo function.
Press Supported key and TURBO together to turn off function.
Turbo function will be auto removed upon controller turn off or no power.
Reset Turbo function by above step 3.
E) Sleep mode
1) When battery capacity low, controller will auto switch to sleep mode.
2) When controller not operate for 15 minutes, controller will auto switch to
sleep mode.
3) If it can’t pair for more than 1 minute, controller will auto switch to sleep
mode.
F) Reset
When controller working abnormal such as not able to turn on/off or auto turn
off or else, it can be reset to default setting by using pin to press the RESET
key inside the small hole at back side.
warn
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2)
this device must accept any interference received, including interference that
may cause
undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for
compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates uses and can radiate radio frequency energy and, if
not
installed and used in accordance with the instructions, may cause harmful
interference
to radio communications. However, there is no guarantee that interference will
not
occur in a particular installation. If this equipment does cause harmful
interference to
radio or television reception, which can be determined by turning the
equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the
following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2018:02:08 13:52:42+05:30
Creator Tool                    : WPS Office
Modify Date                     : 2018:02:28 11:34:36+08:00
Metadata Date                   : 2018:02:28 11:34:36+08:00
Format                          : application/pdf
Description                     : 
Creator                         : Administrator
Title                           : 
Keywords                        : 
Producer                        : 
Company                         : 
Comments                        : 
Source Modified                 : D:20180208135242+05'52'
Document ID                     : uuid:b7805c46-9f87-446e-9655-33c15e68bbf0
Instance ID                     : uuid:52f7115e-91ae-4b86-a939-f024bf0fd779
Page Count                      : 7
Subject                         : 
Author                          : Administrator
Trapped                         : false

EXIF Metadata provided by EXIF.tools