KINGTA TECHNOLOGY B18 Waterproof Bluetooth Speaker User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2920747
Application ID	PH5T1refMT/GZYdGBybvFw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	105.94kB (1324309 bits)
Date Submitted	2016-03-06 00:00:00
Date Available	2016-03-06 00:00:00
Creation Date	2015-10-26 11:08:53
Producing Software	PDFdo.com 5.5.6.0
Document Lastmod	2015-10-26 11:08:53
Document Title	User manual

User’s Manual
Waterproof Bluetooth Speaker
User’s Manual
Bi 8 Speaker
Introduction:
you can use this item with tablet,notebook and many types of
smartphone to stream music,and enjoy handsfree calling.ln order to get
the best results when using the device,please read this manual first before
using.
Feartures
-Volume and song control directly on speaker unit
-Stunning sound clarity
-U|tra portable design
-Great for parties, indoor and outdoor
-Al|ow you to make and answer phone calls
Specifications
Loudspeaker: 40 SW
Built-in Power:Li-ion 600mAh
Dimensions: 3.6 in(W)*3.6 iniL)*i .6 in(H)
SNR:80: 3dB
Wireless Working Frequency: 2402-2480 Ghz
Wireless Transmission Distance: up to 32 ft
Charging Time: i-2 hours
Weight: 5.8 oz
Speaker Dimension:l .7 in
Charging: 5 V, 500mA
Package Contents
i. Bluetooth Speaker 3. User manual
2. USB Charging cable
Important Safety Precautions
When using your Bluetooth Mobile Speaker, basic safety precautions
should always be followed, including the following:
1. Keep this product and its charging cable away from excessive heat.
2. Do not operate this device with a damaged cable or after it has
malfunctioned or has been damaged in any manner.
3. Do not disassemble your device.
4. Only use your device on a flat, stable surface.
Charging Your Speaker
1. Connect one end of the included USB Charging Cable to the
Charging Port on your speaker. Then plug the other end of the USB
Charging Cable into a suitable USB port on your computer to recharge
your speaker’s internal rechargeable battery.
NOTE: The internal battery of your speaker takes approximately two hours
to charge when completely drained.
2. When charging, a red LED light will illuminate to indicate that the unit is
charging. The red light will turn off when your unit is fully charged.
A Quick Look at Your Device
1. Previous: Press and hold to access the
last track in playlist. Press to lower the volume.
2. Phone: Press this button to activate the
the speaker phone function. When music is
playing, press to play or pause a track.
3. Next: Press and hold to access the next
track in a playlist. Press to increase the volume.
1. Charging Port
You can plug one end of the included USB Charging
Cable into this jack, while plugging the other end into
a USB port on your computer in order to charge your
speaker's built in lithium battery.
2. ON/OFF Switch
Press and hold the“ O
Press and hold the“ O
”for power on
”again for power off
Understanding the LED Status Lights
When Charging Your Speaker
Solid red LED = Charging
No red LED = Charge Complete
When Pairing Your Speaker to a Bluetooth Audio Source
Rapid blinking blue LED: Bluetooth not connected. (Ready to pair.)
Solid blue LED: Bluetooth connected.
*RF warning for Mobile device:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Pairing Bluetooth Devices to Your Speaker
In order to pair your Bluetooth audio device to your Bluetooth Speaker for
the first time, follow the steps below:
T). Make sure your Bluetooth audio source is held within three meters of
your speaker.
2). Press and hold the “U” switch on your speaker to power on
The LED light will blink blue to indicate that you have entered pairing
status.
3). Go to the Bluetooth Manager of your Bluetooth audio source. Please
refer to the User’s Manual of your Bluetooth audio source for more
information.
4). Search Bluetooth devices and select “818”.
5). Once paired, the blue LED light will be solid and you can use your
speaker to listen to audio from you Bluetooth sound source.
Using the Hands-Free Function
When an iPhone or other smartphone is connected to your speaker follow
the steps below to take calls hands-free.
i . Press“ W’to pick up the call.
2. Press and hold“ c\"for 2 sec to reject the call.
3. During a call: Press“ c\"again to hang up the call.
Troubleshooting
Thes eaker doesn't connect Speaker needs to be connected/re— —paired to
evrce device
A tone is heard every few Speaker needs To be charged
seconds
of strong electromagnetic interferencesuch as
near indution cookerslarge power fans,motors
cannot reach to 32ft.
etc.
Move the speaker closer to Bluetooth
device.Fully charge the speaker and try again.
The speaker will not power on Speaker needs to be charged
The speaker doesn't control Speaker needs to be in Bluetooth mode for
full control
The speaker distorts at high The devices’ volume needs to be lowered
vo ume
§ 15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
FCC Caution.
§ 15.21 Information to user.
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
§ 15.105 Information to the user.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-|ncrease the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
Producer                        : PDFdo.com  5.5.6.0
Create Date                     : 2015:10:26 11:08:53+08:00
Modify Date                     : 2015:10:26 11:08:53+08:00

EXIF Metadata provided by EXIF.tools