KO JA ARCHAP01 Archetype Membrane Touch Keyboard User Manual 1
KO JA (Cayman) CO., LTD. Taiwan Branch Archetype Membrane Touch Keyboard 1
KO JA >
User manual
![](/img.php?id=1521798&img=bg1.png)
Copyright © 2011 Hatch & Co. All rights reserved.
www.hatchnco.com
User
Manual
![](/img.php?id=1521798&img=bg2.png)
A. Bluetooth Keyboard (ARCHETYPE) pairing
A. Turn on the Bluetooth connectivity feature in Tablet by selecting:
Settings > General > Bluetooth
B. Turn on the ARCHETYPE power switch; the buzzer will sound two
beeps.
C. Press and hold the [connect] button for 3 seconds; the buzzer will
sound three short beeps.
D. The Tablet will display “ARCHETYPE” as an available Bluetooth
device.
E. Select “ARCHETYPE” on the Tablet and a four-digit code will appear
on the screen.
F. Type the four-digit code on ARCHETYPE and press Enter;
ARCHETYPE will be paired to the Tablet.
NOTE: ARCHETYPE remembers the last device it is connected to, to
connect to the same device, simply power on ARCHETYPE and
make sure the Bluetooth feature on the device is turned on,
ARCHETYPE and the device will connect automatically.
Connect button is needed if:
i. Pairing ARCHETYPE for the first time
ii. ARCHETYPE has been paired with another device
B. Hot Keys
HOME Button
Previous Track
Play / Pause
Next Track
Mute
Volume Down
Volume Up
![](/img.php?id=1521798&img=bg3.png)
International Keyboards
Virtual Keyboard
Buzzer On/Off
Bluetooth connection
C. Light Indicators
Status \ LED
Low
Battery
Charging
Symbol/Caps
Lock
Connect
Quick Flash
Symbol ON
Pairing
Slow Flash
V
Connected
Solid ON
V
Caps Lock ON
D. Troubleshooting
A. I have turned ON ARCHETYPE, and it does not connect to Tablet.
Please make sure that ARCHETYPE is not paired to another device
that is within range. If so, please unpair ARCHETYPE to the other
device.
B. How do I unpair ARCHETYPE to Tablet?
Go to Tablet and select: Settings > General > Bluetooth, and under
select the “>” icon next to ARCHETYPE, and then select “FORGET
THIS DEVICE”
C. What is the “symbol” key, and how does it work?
By pressing the “symbol” key once, user can insert symbols on Q, W,
E, R, T, Y, U, and I, also control the arrow keys located on the bottom
right-hand corner. To deactivate, simply press the “symbol” key
once again.
E. Remark
The circuit that connects the EUT and PCB is the path which the keyboard
travels to send commands to its processor.
![](/img.php?id=1521798&img=bg4.png)
Visit www.hatchnco.com for more information.
Copyright © 2011 Hatch & Co. Corp. All rights reserved.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules.These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.