KONICA MINOLTA A09N IC Card Authentication Unit User Manual Manual 2
KONICA MINOLTA, INC. IC Card Authentication Unit Manual 2
Contents
- 1. Manual 1
- 2. Manual 2
Manual 2
Safety Information Guide Authentication Unit (IC Card Type AU-201) Carefully read this information, and then store it in a safe place. • Before using this device, carefully read this information and follow it to operate the device correctly. • After reading this information, store it in the designated holder with the warranty. ■ Important information • The reprinting or reproduction of the content of this publication, either in part or in full, is prohibited without prior permission. • The content of this publication is subject to change without notice. • This publication was created with careful attention to content; however, if • • • • • inaccuracies or errors are noticed, please contact your sales representative. The marketing and authorization to use the KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. product mentioned in this information are provided entirely on an “as is” basis. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. assumes no responsibility for any damage (including lost profits or other related damages) caused by this product or its use as a result of operations not described in this information. For disclaimers and warranty and liability details, refer to the User's Guide Authentication Unit (IC Card Type AU201). This product is designed, manufactured and intended for general business use. Do not use it for applications requiring high reliability and which may have an extreme impact on lives and property. (Applications requiring high reliability: Chemical plant management, medical equipment management and emergency communications management) Use with other authentication devices is not guaranteed. In order to incorporate improvements in the product, the specifications concerning this product are subject to change without notice. ■ For safe use NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interface by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help WARNING: The design and production of this unit conform to FCC regulations, and any changes or modifications must be registered with the FCC and are subject to FCC control. Any changes made by the purchaser or user without first contacting the manufacturer will be subject to penalty under FCC regulations. INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES003 ISSUE 4) (For Canada Users) (This device complies with RSS-Gen of IC Rules.) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. This Class B digital apparatus complies with Canadian ICES-003. • Do not this product near water, otherwise it may be dam- Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. aged. • Do not cut, damage, modify or forcefully bend the USB cable. A malfunction may occur as a result of a damaged or cut USB cable. • Do not disassembly this device, otherwise it may be damaged. ■ Regulation notices CE Marking (Declaration of Conformity) for Users of the European Union (EU) This product complies with the following EU directives: 89/336/EEC, 93/68/EEC, 73/23/EEC, 93/68/EEC and 99/5/EEC directives. This declaration is valid for the area of the European Union. This device must be used with a USB cable packed. The use of the others cables is likely to result in interference with radio communications and is prohibited under CISPR rules and local rules. USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES (For U.S.A. Users) FCC: Declaration of Conformity Product Type Authentication Unit (IC Card Type) Product Name AU-201 (This device complies with Part 15 of the FCC Rules.) Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. A09N-9554-00 For EU member states only This symbol means: Do not dispose of this product together with your household waste! Please refer to the information of your local community or contact our dealers regrading the proper handling of end-of-life electric and electronic equipments. Recycling of this product will help to conserve natural resources and prevent potential negative consequences for the environment and human health caused by inappropriate waste handling.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:01:11 16:59:44+09:00 Create Date : 2007:01:11 12:05:16+09:00 Metadata Date : 2007:01:11 16:59:44+09:00 Format : application/pdf Title : Creator : . Document ID : uuid:b563162e-27ad-4dc4-a394-d3ecd59d86f3 Instance ID : uuid:54c6b9af-019f-48c8-a5fa-cfdf98cf984c Page Count : 1 Warning : [Minor] Ignored duplicate Info dictionaryEXIF Metadata provided by EXIF.tools