KONX INTERNATION KXPH Wireless video door phone (Indoor Monitor) User Manual KX7001 x

Download:
Mirror Download [FCC.gov]
Document ID	2114199
Application ID	D2SR0jUx0sw10h64dWxHog==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.56kB (782001 bits)
Date Submitted	2013-11-08 00:00:00
Date Available	2013-11-08 00:00:00
Creation Date	2013-10-18 16:12:24
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2013-11-06 17:02:20
Document Title	Microsoft Word - KX7001 User Manual.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	jackie

Wireless Video Door Phone
User Manual
Contents
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
●
●
Introduction ...................................................................... 2
Features ............................................................................ 2
Packing list ........................................................................ 3
Outdoor camera ................................................................. 4
Indoor monitor .................................................................. 4
Installation instructions ....................................................... 5
E-lock installation................................................................ 7
Operation........................................................................... 8
Working environment .........................................................13
Notices ...........................................................................13
Specifications ..................................................................13
Failure diagnosis ..............................................................14
Thank you for purchasing our product.
Please carefully read this user manual before using the product and
follow the manual to install and operate.
1. Introduction
3. Packing list
The product is applicable in office, house, apartment, hotel, building and so on.
The outdoor camera is easy to install. Indoor monitor is portable. It can be hung
on the wall, or be placed on the desk.
2. Features
(1)
2.4GHz digital frequency hopping and encryption technology, transmission
distance up to 200 meters in free field, robust anti-interference
(2) Clear night vision can capture image in low-illumination environment
(3) Rain shield for the outdoor camera is available
(4) 3.5 or 7 inch TFT color panel for indoor monitor
(5) Surveillance, unlock, hands-free call and talk
(6) 16 chord melodies and melody volume is adjustable
(7) Brightness and talk volume are adjustable
Outdoor camera part
(8) Date (only one camera with one monitor system) and time shown on the screen
(1) Outdoor camera (2) Power adapter Input: 100-240V 50/60Hz Output: 5V/1A
(9) Indoor monitor could take pictures automatically or by instruction. It could store
(3) double-sided tape (4) Unlock control (5) Screws and stoppers
up to 100 pictures with date and time
(6)
DC cable
(10) BL-5J battery of camera and monitor is replaceable and rechargeable
(11) Outdoor camera works about 30 days if with battery. It works all the while if
connected with the 2w solar module. Or it works all the while if power adapter
is connected.
(12) Wireless unlock control supports power on and power off unlock
(13) One outdoor camera supports up to 4 indoor monitors and vice versa
(7) Remote control (optional)
(8) BL-5J battery (optional)
(9) Sloar moudle charger (optional)
(10) 6meters or 10meters antenna
Indoor monitor part
(11) 3.5” indoor monitor or 7” indoor monitor
(12) Fixed iron for 7” indoor monitor (13) BL-5J battery (14) USB Cable
(15 ) USB power adapter; Input: 100-240V 50/60Hz Output: 5V/1A (16) User manual
4. Outdoor camera
(1) Microphone
(2) Camera lens
(B) 7” indoor monitor
(3) Rain shield
(4) Infrared light
(5) Indicating light for recharge
(6) Indicating light, show green if press ‘pair’ or ‘call’ button, show red if low voltage
(7) ‘Call’ button
(8) Speaker
(11) Battery lid of BL-5J
(9) Adapter interface (10) ‘Pair’ button
(12) Obligate area welding antenna
(1) Speaker
5. Indoor monitor
(A) 3.5” indoor monitor
(2) TFT screen
(5)
‘Monitor’ button
(8)
Left
(9) ▼Down
(12) Working light (13)
(6)
’Unlock’ button (7)
(10)
’Talk’ button
Right (11) charging light
‘Take picture ’ button (14) ▲Up
(16) Power switch (17) Fixed slot
6.
(3) Antenna (4) Microphone
(15) USB interface
(18) Battery lid of BL-5J (19) Bracket
Installation instructions
The outdoor camera should be installed at the shielded position to be free from
direct shinning of strong light or raining. The height for installation is recommended
to be 1.5~1.7m for outdoor camera to focus on the best monitoring range. Wireless
signal will be weakened if there are obstacles between the outdoor camera and the
indoor monitor. Please check the best sign of monitor when install the outdoor
camera to get the best position.
If wiring needs to go through wall, the plug should be firstly wrapped with tape so
as to avoid the sand or dirt going into the plug thus resulting in malfunction.
Use double-sided tape fix camera on the wall or door as the following diagram.
Take off the screw on the bottom, remove the back box fit on the wall, embed the
camera to the back box and use screws to fix as the following diagram.
7.
E-lock installation
E-lock and power of e-lock are not included in this product. Unlock control
connects e-lock, shares 12V power adapter with e-lock when it works.
If it is inconvenient for the user to install power adapter near outdoor camera,
user can also select solar panel module and rechargeable battery for outdoor
camera. But the solar panel module and rechargeable battery are not included in the
product package list.
The Vmp and Imp of the 2w solar panel module are 5v and 400mA respectively.
The wire between solar panel module and camera length is 6 meters. You’d
better put the solar module on the place the sun can directly shine. The battery
costs 3~4hours to be fully charged by strongly directly shinning. Outdoor camera
can work about 30 days each full recharge.
time in grey.
(2) Melody and volume
When indoor monitor is in non-talk mode, press
chord melodies as the sound of the bell. Press
button to select one of the 16
choose to the volume of melody
(adjust level: 1-2).
16 chord melodies are Ding-dong, To Alice, Westminster bell, Butterfly lovers, The
cygnet, Red river valley, My heart will go on, Turkey’s march, Small dance,
Notes: The distances between wireless unlock control and outdoor camera
should be within 10 meters so that the wireless unlock control is able to receive
unlock command. The remote control uses 27A/12V battery.
presses
Congratulations you, William's prelude, Love romance hudson, Memory, The Little
Mermaid, Green sleeves, Romeo and Juliet.
of
remote control to unlock. The work distance between remote control and unlock
(3) Talk volume
control should be within 15 meters.
In the talk mode, press
The system can work together with intelligent lock, Intelligent lock uses 4pcs AA
batteries.
to adjust the talk volume. Adjust level: 0-7.
(4) Brightness
In the talk mode, when indoor monitor has dynamic image from outdoor camera,
press ▲, ▼ to adjust brightness. Adjust level: 0-7.
8.
Operation
Note: When the system is in working condition, if there is no blocking wall
Operation
between indoor monitor and outdoor camera, you must keep them at least 6
(1) Indoor monitor turn on/off
meters apart to avoid the ‘whistle’ sound.
Turn on:
A Setting
Turn the power switch to “ON”, working light display red and rings the
melody.
Turn off:
(1) Date and time
When indoor monitor is in non-talk mode, press
button for 3 seconds, there
Turn the power switch to “OFF”, working light off。
Maximum Com-sign is level 6. Maximum battery bar is level 4.
will be a "T" (for time) character on the left side of the battery symbols on the screen.
User can set the date (year/month/day) and the current time (hour/min). Time format
is 24 hours. Only one outdoor camera with one indoor monitor is available for date
setting. Press
button to select, press ▲, ▼ button to adjust the date and
For one outdoor camera or more outdoor cameras with one indoor monitor, if
there is no calling from the outdoor camera, the indoor monitors are in standby
mode. User can press the
button once to wake up the indoor monitor; press
button again to enter monitor mode and monitor the outdoor as long as you like,
monitor signal will display on the screen. Press
button again to quit and turn off
the screen.
For several outdoor cameras with one indoor monitor, in monitor mode,
press
button to show the image from the CAM1, CAM2, CAM3, CAM4 (if the system
has) in sequence. At the last outdoor camera, press
button again to quit and
turn off the screen.
(2) Talk, unlock
(4) Charge
The visitor presses the “call” button of the outdoor camera. All indoor monitors will
sound melody.
A.
Press
the lithium battery. After that charge 3 hours every time, Charging led is red when
button of one indoor monitor to speak to visitor before unlock.
Other indoor monitors can see the image but can not hear sound of the visitor.
If you want to let other indoor monitor to talk, press
button to end the
current dialogue, then another indoor monitor could press
button to
speak to visitor.
When in talk mode, press
button again, the unlock signal will
disappear.
button to turn off the screen and enter standby mode, or it will turn into
If do not want to let the visitor go in after seeing the video, no operation or
press the
from green to red when the battery is in low power.
Picture
When there is video from outdoor camera, presses
button to take a picture,
one press captures one picture.
When the Call button of outdoor camera is pressed, if the user isn't in or no
standby mode automatically after 30 seconds.
B.
charging, it turns green when the battery is filled, the color of battery bar will change
(1) Take pictures
button to unlock the door lock, the unlock signal
shows on the screen. When press
Press
For the first time, the battery should be charged for more than 5 hours to activate
button to turn off the screen and then enter into standby mode.
Indoor monitor enters into the standby mode after 30 seconds if no any operation.
operation, all indoor monitors automatically save the image from camera after 10
seconds. The new picture will replace the first picture if no memory is available.
(2) Browse pictures
In the non-talk mode, press
press
button to browse the stored pictures, then
button or after 10 seconds to quit browse mode.
Note: if you use multiple indoor monitors, please keep distance among indoor
(3) Delete pictures
monitors to avoid affecting talk effect.
Firstly turn off the indoor monitor, then press
5seconds, then turn on the indoor monitor,
and
button together about
until the screen displays text: ’Delete
all photo, please wait’ ‘no photo , Please Power off’. After that all pictures have
(3)
been deleted. Please turn off the indoor monitor.
Monitor
10
11
D
Pair
control, the pair light will flash once. Press the
button of the indoor monitor
under talk mode, pair light will continuously flash.
pair ok before use get the product.
Once again press the pair button of unlock control, pair light stops flashing.
1 Pair outdoor camera with indoor monitor
Finally press the
Note: The system only support 3 models as below. User can’t mix them when
button of the indoor monitor under talk mode, the pair light
will flash 3 seconds, it means that pairing is successful.
purchase. For one-to-one system, adding more outdoor camera or more
indoor monitor can’t become one-to-multiple system.
9.
(1) One outdoor camera and one indoor monitor system is 1V1 system
Press ‘pair’ button of outdoor camera, indicating light flash, press
and
Working environment
(1) Working temperature: -15℃—+55℃
(2)
Working humidity: ≤85%
button of indoor monitor at the same time, the screen will show “... 1v1 pairing”. If
pairing succeeds, the video from outdoor camera will be shown in the screen of
10.
indoor monitor.
(2) One outdoor camera and up to 4 indoor monitors system is 1VN system
Firstly, press ‘pair’ button of outdoor camera, indicating light flash, press
and
button of indoor monitor at the same time, the screen will show “... 1v4 pairing”.
If pairing succeeds, the video from outdoor camera will be shown in the screen of
indoor monitor.
Secondly, repeat the above operation for each indoor monitor.
(3) Up to 4 outdoor cameras and one indoor monitor system is NV1 system
Note: To pair this system is more complex than to do the above two systems.
Notices
(1) Please don’t cover anything on the Microphone or speaker when it is in
working mode.
(2) Please always use the specified power adapter, or that with the same
model (same standard voltage and current).
(3) Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards.
11.
Specifications
After turn on outdoor camera and indoor monitor, press button ASAP so not
Camera
Indoor monitor
let any part enter into standby mode.
Firstly, press the ‘pair’ button of outdoor camera, indicating light flash, press
and
button of indoor monitor at the same time, the screen will show “... 4v1
Light
Source
USB
6 LED lights
Power
pairing”, if pairing succeeds, the video will be shown in the screen of indoor monitor.
Secondly, repeat the above operation as soon as possible until finish all pairing.
Input：AC 100-240V
50/60Hz
Output：DC 5V/1A
3.5”TFT 320×240
Camera
CMOS 300K pixels
Screen
press ‘monitor’ button continuously to monitor each outdoor camera. If each outdoor
Battery
BL-5J 1250mAh(option)
Battery
camera works, it means that system pairs successfully. Otherwise repeat the first
Power
Solar moudle, battery or
Power
Battery or 5V 1A power
step.
supply
5V 1A power adapter
supply
adapter
Thirdly, check whether pairing is successful, let system power on again, and then
2 Pair unlock control with door phone system
Size
126×93×42 mm
Size
Unlock control is connected to 12V power adapter. Outdoor camera uses the
battery, or is connected to the power adapter. Firstly press the pair button of unlock
12
13
7”TFT 800×480
BL-5J 1250mAh
3.5” 141×87×20 mm
7” 236×130×18 mm
Installatio
Double-sided
or
screw fix
Standby
12.
tape
35 days
Installa
tion
Place on the desk etc.
Or wall mounting type
3.5” 20 days
Standby
7” 4 days
Failure diagnosis
Malfunction
Fail to start the
product
Checking
Debug
If turn the switch to the "ON"?
Turn the switch to the ON
If the power of Li-on battery is
not enough?
Charge the Li-on battery
If the plug of power adapter
Re-connect indoor monitor
correctly?
with power adapter
If the power adapter correctly
Re-insert the plug to make
get through the 100-240V AC
power adapter get AC
electricity?
electricity.
No voice in talk
If the talk volume is adjusted to
To adjust the talk volume to
mode
be the least?
be suitable.
Fail to charge
The image is
flashing or
noisy
No signal for
indoor monitor
If the indoor monitor is close to
induction cooker and
microwave oven which has
magnetic wave?
Keep indoor monitor far away
from these things which has
magnetic wave.
If the outdoor camera doesn't
To connect power adapter to
connect the power?
the outdoor camera
If the outdoor camera is far
away from the indoor monitor?
If there is other strong
magnetic space bother?
14
Keep the distance in 60
meters within (stopped by
multi-wall)
Keep indoor monitor far away
from the strong magnetic
space
FCC ID: 2AA6JKXPH
KONX INTERNATION LIMITED
Model No.: KX7001
Model name: Wireless video door phone（Indoor Monitor）
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device and its antenna(s) must not be co-located or operation in conjunction with any
other antenna or transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2013:11:06 17:02:20+08:00
Create Date                     : 2013:10:18 16:12:24+08:00
Metadata Date                   : 2013:11:06 17:02:20+08:00
Format                          : application/pdf
Title                           : Microsoft Word - KX7001 User Manual.docx
Creator                         : jackie
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:0e767fba-f1c8-429a-8ee6-475b34c9899f
Instance ID                     : uuid:c6688bbe-8411-4b0c-abc1-dd2bc4171e0f
Page Count                      : 9
Author                          : jackie

EXIF Metadata provided by EXIF.tools