KP Electronic Systems KPELB160PIT 2.4GHz MODULE User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1890237
Application ID	kj+YiHv1UYHOaW4A1SeHtg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.05kB (313112 bits)
Date Submitted	2013-01-30 00:00:00
Date Available	2013-01-30 00:00:00
Creation Date	2013-01-21 18:49:33
Producing Software	Microsoft® Word 2010
Document Lastmod	2013-01-29 10:28:06
Document Title	User Manual
Document Creator	Microsoft® Word 2010
Document Author:	Efi Rushinek

User manual 2.4 GHZ module (ELB160PIT)
Contents
1.
Module Specification: ...................................................................................................................... 1
2.
Signal Description: ........................................................................................................................... 2
3.
CC2500 Setting: ............................................................................................................................... 2
1.
Module Specification:
User manual 2.4 GHZ module (ELB160PIT) version V1.0 Jan 10 2013
Out power: -6dBm
Base Frequency 2.4329990 GHz
Channel Spacing 199.951172 kHz
Rx Filter BW 541.666667 MHz
Data Rate 249.939 kbps
Data Modulation MSK
External power supply (VBAT) maximum 14.8V
Current consumption maximum 30ma
Single channel of operation: 2433 MHz
2.
Signal Description:
PWR_ON; Switches on the 3.3V regulator (U1). Use this power to save power when the ISM transceiver
is not required.
SCLK, SI, SO, and CSN; Signals are the SPI (serial interface with the CC2500). SCLK is the clock. SI is the
serial data from eternal controller. SO is the serial data from the CC2500. NCS is the chip select of the SPI
communication (positive logic). All these signals are at 3.3V logic level. ThFor more information refer to
CC2500 Low-Cost Low-Power 2.4 GHz RF Transceiver.
RED1, GRN1, and BLK1; Not used signals.
GUP: Indicates the red switch position. “1” no magnet, “0” senses magnet. This signal is an option for
low current control.
PROG; Not used.
VBAT; Power supply.
3.
CC2500 Setting:
For Data rate of 250KHz, MSK modulation and optimization for sensitivity use the register value as it is
specified by table 3.
User manual 2.4 GHZ module (ELB160PIT) version V1.0 Jan 10 2013

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Efi Rushinek
Create Date                     : 2013:01:21 18:49:33+02:00
Modify Date                     : 2013:01:29 10:28:06-05:00
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : Efi Rushinek
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2013:01:29 10:28:06-05:00
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:44d86ab8-6657-4560-a96e-9fe6250bccb0
Instance ID                     : uuid:79944ab3-5eeb-411b-b0ce-eff6dfa4d56c
Page Count                      : 2

EXIF Metadata provided by EXIF.tools