KP Electronic Systems KPMT150W 2 WATT VHF AUTOMATIC METER READER-TX User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	493047
Application ID	F5cix0CpHWRi1DvHfpzgzA==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.04kB (250542 bits)
Date Submitted	2004-12-01 00:00:00
Date Available	2004-11-18 00:00:00
Creation Date	2004-11-15 10:21:35
Producing Software	Acrobat Distiller 4.05 for Windows
Document Lastmod	2004-11-15 08:09:45
Document Title	users manual

2. Meter Input: The meter input is a two
wires cable. These wires connect to the
meter output.
MT150W™
Long-Range
Synthesized Radio
Meter Transmitter
Installation Manual
Wall Mounting Installation
1. Fasten the mounting bracket on
the wall with four screws (See
figure 2)
2. Slide the MT150W unit on the
mounting bracket until the 4 clips
are locking the unit
3. Define the parameters with the
field programmer (FTU100) see
the FTU User Guide
4. Insert the terminator to J9 (See
figure 1)
5. Put the cover
Web Site: www.kpsystems.com
ISRAEL Office
Email: info@kpsystems.com
Tefen Industrial Park, Tefen 24959
Tel: 972-4-987-3066 Fax: 972-4-987-3692
J9
On-Pipe Mounting Installation
1. Fasten the mounting bracket
on the pipe with two screws
and the “Omega” bracket
(See figure 3)
2. Slide the MT150W unit on
the mounting bracket until
the 4 clips are locking the
unit
3. Define the parameters with
the field programmer
(FTU100) see the FTU User
Guide
4. Insert the terminator to J9
(See figure 1)
5. Put the cover
Meter
Input Cables
Figure 1: MT150W™ View
USA Office:
KP ELECTRONICS INC.
Email: info@kpsystems.com
109 Tudor Drive, North Wales, PA 19454
Tel: (215) 542-7460 Fax: (215) 542-7461
Book 95
Approved: Amir S.
Rev:
01
01/11/04
MT150W™ General Description
MT150W™ is a long-range, synthesized
radio-metering transmitter in the VHF 172174 MHz frequency range..
When the MT150W detects pulse conditions
at one or more of its inputs the pulse is
counted and saved.
When the number of the pulse is equal to the
Trans Scale defined by the GUP10™, it is
then transmitted to the central station
according to the WAT-NETTM protocol
selected for the system in operation.
MT150W™ has one connector (see Figure
1).
1. J9: The 10-pin programming jack is a
serial port to connect a PC or a FTU (see
Figure 1).
Unit parameters and meters values
are easily programmed using
Gup10™ utility-programming
software. (See the MT150W™
Programming Guide) or by the FTU.
Preparing for Operation
Before installing the MT150W™ on
site, perform the following
preparations:
1. Setting communication
parameters
2. Self test
Setting Communication
Parameters
• Connect GUP10 program to the
MT150W™ (see the
MT150W™ programming
guide)
Self-Test
In order to perform a self-test please
see the Field Programmer User
Guide.
Installing the MT150W
There are two mounting methods:
1.
2.
Wall mounting
On-Pipe mounting
Figure 2: Wall Mounting
Figure 3: On-Pipe Mounting
Restrictions:
1.
2.
Wiring:
Do not mount the unit on any kind
of metal surface.
Do not mount any input cable next
to the antenna (see figure).
Meter types:
1.
2.
3.
There are two main types of meters:
Meters that produces a ‘Passive
Pulse’.
Meters that produces an ‘ActivePulse’ (known also as-‘’Pulse
Generator’).
1.
Connect the two polls of the Meter input
cable to the meter using a self-stripping
insulated connector (like 3M-Scotchlock
or equivalent).
2. Polarity: if a ‘Passive Pulse’ type meter
is connected, there is no polarity so the
wires can be connected in any order, if
an ‘Active Pulse’ type meter is
connected, there is a polarity and the
wires have to be connected in the
following order: Red wire to the
POSITIVE (+) poll and the Black wire
to the NEGATIVE (-) poll,
(see figure 4).
Figure 4: Wiring
Technical Specifications:
Operating Voltage
Standby Current
Tx Current
Power Output
Freq. Stability
Operating Temp.
Storage Temp.
Weight
8–15 VDC
30µA max.
0.8A max.
2W
±5ppm at
operating temp.
range
-22°F ÷ 120°F
(-30°C ÷ 60°C)
-40°F ÷ 158°F
(-40°C ÷ 70°C)
0.5 lb.
(230 gr.)
THE MANUFACTURER IS
NOT RESPONSIBLE FOR ANY
RADIO OR TV
INTERFERENCE
CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS
EQUIPMENT. SUCH
MODIFICATIONS COULD
VOID THE USER’S
AUTHORITY TO OPERATE
THE EQUIPMENT.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:1b7f7c92-1fce-4878-8790-171354c8c870
Producer                        : Acrobat Distiller 4.05 for Windows
Modify Date                     : 2004:11:15 08:09:45-05:00
Create Date                     : 2004:11:15 10:21:35Z
Metadata Date                   : 2004:11:15 08:09:45-05:00
Document ID                     : uuid:af859886-add7-4d7b-9603-7c35300b412b
Format                          : application/pdf

EXIF Metadata provided by EXIF.tools