KROHNE 702 Level Radar User Manual Radar

Krohne America Inc Level Radar Radar

Contents

Addendum to manual

Download: KROHNE 702 Level Radar User Manual Radar
Mirror Download [FCC.gov]KROHNE 702 Level Radar User Manual Radar
Document ID237557
Application IDHercY2oJZsRHY+q84vD+Dw==
Document DescriptionAddendum to manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize0.74kB (9286 bits)
Date Submitted2002-04-18 00:00:00
Date Available2002-04-18 00:00:00
Creation Date2002-04-05 09:18:06
Producing SoftwareAcrobat PDFWriter 4.05 for Windows
Document Lastmod0000-00-00 00:00:00
Document TitleRadar.PDF
Document CreatorMicrosoft Word
Document Author: egould

ADDENDUM TO LEVEL RADAR INSTALLATION AND OPERATION
INSTRUCTIONS: 7.02230.31.00
Compliance with U.S.A. FCC Part 15 Rules (FCC ID JH5-702) and FCC Part
90 Rules (JH5BM702)
The BM702 Level Radar complies with Part 15 of the FCC Rules when installed
in totally enclosed metal tanks. A label is affixed to the instrument as shown
below:
FCC ID JH5-702
Krohne Level Radar
When installed in totally enclosed metal tanks, this device complies with
Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference
which may cause undesired operation.
When installing the metal, “horn” antenna versions with metal gaskets (all metal,
metal-sheathed, or spiral-wound metal gaskets), only normal installation
procedures should be observed.
When installing a device with a “Wave-Stick” PTFE antenna or with a nonmetallic gasket, the installation must include the shielding strip (item “C) and the
strap retainer (item “S”) shown in Section 2.2 - “Installation on the tank “ on page
6. Also, the flange bolt holes, top and bottom, must be completely covered by
the bolt heads and nuts which may require the use of flange bolts and flange nuts
or appropriately-sized flat washers.
The item referred to by the asterisk should read – “ * required for European radio
approvals and United States FCC Part 15 approval for Wave-Stick version or
FCC Part 15 approval when installed with non-metallic gaskets”.
When installing the BM702 in other than totally enclosed metal tanks, a sitespecific license under FCC Part 90 Rules must be obtained as Krohne’s FCC
identifier - FCC ID JH5BM702. Contact Krohne for procedure to obtain license.
Please note: changes or modifications not expressly approved by Krohne, could
void the user’s authority to operate the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 1
Creator                         : Microsoft Word
Create Date                     : 2002:04:05 09:18:06
Title                           : Radar.PDF
Author                          : egould
Producer                        : Acrobat PDFWriter 4.05 for Windows
EXIF Metadata provided by EXIF.tools
FCC ID Filing: JH5-702

Navigation menu