KYE SYSTEMS G9002 User Manual 38553

Download:
Mirror Download [FCC.gov]
Document ID	38553
Application ID	201MIDB2+xaEAzI0eRk4Ag==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.01kB (87649 bits)
Date Submitted	1999-05-24 00:00:00
Date Available	1999-05-28 00:00:00
Creation Date	2001-06-25 21:31:12
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-06-25 21:31:14
Document Title	38553.pdf
Document Author:	jsoscia

EUT:SOUND CARD
FCC ID:FSU09002
KYE SYSTEMS CORP.
USER’S MANUAL
1:
Inserting the Card
Befom You sum to install the PC] sound and into
your PC, mg Wm 98195011710 operating system is?
must be installed on your system in.“
To mm the sound aid:
1. Power off your PC. M
2. Inna the card into an available PCI slot. HI
3. Connect the CD audio cable ofyour CD-ROM drive RDA—i
tothemd’s CD-AudioInoclmeetor JlOorJll. W
mu!
4. ColmectyourspmlmstotheAudint’hujackor
miervphonctotheMiclnjsckonthemiddeespectively.
Software Installation
I. Start Windows. The Windows message box nppurs announcing the detectiim ofthe “PC! Multimedia Audio Device".
2. Far Window n or Wino-vs 95mm users: The Update Device Driver dialogbax appears. For Madam! 95 users.-
select the “Driver from disk provided by hardware menui'nturer" item and click on OK to continue.
3. Insert the SM Uve Utilities CD-ROM into your CD-ROM drive, i,e. D, For F5B/OSR2 um, you may have in cliek the
other lnutiom button.
4. In the path line type D:\W1N98\ENGLISH . It is forWinddws 98 use“ Blld English Version
In the path line type D:\WIN95\ENGLISE . It is far Windows 95 um and English Vasim
Then click on OK or Finish to copy the relative drive: files.
In You may also be asked to insert the Microsofl Windows 98 or 95 CD~ROM during the install prom“.
5. Follow the on-line installation procedures
6. Dmible—clnik on the Control Panel, Syxtem icon, Device Manger tab, then “Sound. video Ind pme eontmllels”,
and you should see [our devices without any exclamation mar/r. SM Live legacy Audio, SM live legacy Joystick,
SM live PCI Audio . and SM live PCI Joyltick You also should see ForteMedla QED icon in the Control
Panel, This mums that this sound and is installed swcessfiilly.
For WiluiaWs‘NTtDm'm, to Wall Ill! ezrd’s Windows NT‘fldll'lws:
I. Start Windows NT, Double-click on the Multimedia icon from the Control Panel.
2. In the Mullimedil Properties dialog be. click on the Devices tab
3. Select the “Audio Device" in the multimedia devices and then click the Add button.
4. Select the ”Unlisted or Updlted Driver” item from the Add dialog box. Click OK.
. Alter the Install Driver screen appears, insert the SM Live Utilities CD—ROM into your (DD-ROM drive, i e. D.
Type D:\W|NNT, then click OK.
.°'
then click OK button. Unless you have the knowledge and need to configure the board setting yourselI, click OK.
The System Setting Change dialog box appeam Click the Rest-rt Now button to activate the sound card fiver.
' lull Iliecunl't ll'iluluwr mulin tit/t
Double click on the My Computer iwn, then double-click on the SM lee CD-ROM iwn.
Select lnstxll DinetXSJ) to install Directx 5.0 utilities if upon have not installed it yet.
in the main setup program, select lnstlll Softwlre anetlblefollow the on-line procedures will install
YAMAHA Soil Synthesizer S»YXGSO.
4. ln til: main setup program, select [mt-ll Audio Ruck Follow the on-line procedures will install EzAudio
Application.
5. Select QSouud 3D Audio Demo. It will show you the surround sound by using Qsound .
To change the ”(Q or DMA in Madam;
1. Click on the System‘s Device Manager tab of the Control Panel.
2. Double-click on the item “Sound, video Ind game enntrollerr", that double-click on the sub~item “SM Live
Legacy Audio", Click on the Rerouree tab in the Properties dialog box.
3. Under Resources Setting entry, select the Interrupt Request (IRQ) or the Dirth Memory AwKDMA) to change.
4. Click the Change Setting button. Click the up or down arrow button to select the new setting. then cliek on OK to
save the changes You my select different configuration seltings by selecting from the “Setting based on“ enu'y.
To remove it: sound drivers. On the comm! panelDouqu-dick ForreMedv‘n Qso 2.00 (“cw-Click the ham.
“Uninflall” will do an autumn”: dean/"g up oflhe Window: Sound Malay-Audio registry mm'u.
Others
7.
.\
1 .
2.
3.
,,,,,,, ell at,” w..t A... mu, [met to the . 0A h... me in relative flue-ADHCS in do. . .-aundled.
’ I/ycm cannot hearymir voice or Ihe voicefi-om [he rt wore side during NuMeen‘ng, cheek the Mixer program of
Windows or EzAudio Application to see if the Microp. .. 15 500112 is not muted. You may need to select “Mic
Boost" (located at Advanced button of Windows Mixer program) for microphone volume enhancement.
709000
M.“ .A,e_._4.,.-.__A._ _ , “e ..... .t ~_ ...-.-.,, 7
In the Add Unlisted or Updated Driver dialog box, select the audio driver model “SM Live W:ve,Mlxer,-nd FM-Syn“,
i‘
FEDERAL COMMUNICATIONS COMMISSION
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:(1) this device may not cause harmful interference. and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
NOTE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection. This equipment generates, uses and can radiated radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications However, there is no
guarantee that interference will not occur in a particular installation If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient o relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Shielded interface cables (except speaker, microphone, stereo cassette player data
cable) must be used in orderto comply with emission limits.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:06:25 21:31:12
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : jsoscia
Title                           : 38553.pdf
Modify Date                     : 2001:06:25 21:31:14-04:00
Page Count                      : 4

EXIF Metadata provided by EXIF.tools