KYE SYSTEMS GG000B 2.4GHz XBOX GAME PAD User Manual users manual

KYE Systems Corp 2.4GHz XBOX GAME PAD users manual

users manual

Wireless XBOX Controller FEATUREThis Mini Wireless controller uses state of the art technology for a better gaming experience. The technology used in this controller allows up to 16 players to use these controllers in one area. The ergonomically designed grips combine functionality as well as comfort. The use of 2 AA batteries(not included)allows for up to 70 hours of play time depending on the use of the vibration control switch. In most cases the software used for game play will dictate the functions of the controller buttons. See 'Controller Setup' in the software game menu. Prior to using the controller, you should move the Analog Sticks in a circular motion. 1. State Of The Art2.4GHz Technology Allows Up To 16 Players2. Ergonomic Analog Sticks & Directional Pad For Superior Control 3. Uses 2 AA Batteries(Not Included) For Up TO 70 Hours Of Play Time4. Rubberized Grips For Comfortable Handling5. Auto-Detect Feature For Simplified Set Up6. Turbo Function For Rapid Fire INSTRUCTION1.Remove the battery cover on the back of the controller and insert 2 AA batteries. Replace the cover.2.Plug the receiver into one of the XBOX controller ports of X-BOX console3.If the LED on the receiver does not automatically begin flashing, press the connect button on the receiver. The green LED should now be flashing. This indicates that it is searching for a controller to connect to .4.Turn the controller on using the on/off switch on the controller.5.If the LED on the controller is off or flashing, Press the connect button on the controller. If it automatically turns on ,proceed to next step.6.The controller and receiver should be connected now. The red LED on the controller should be on ,and the green LED on the receiver should have stopped flashing and should be on .You are now ready to play. Repeat the above procedure for each additional player using an Mini Wireless Controller, one at a time. Plug only one receiver into the XBOX. Follow the procedure above for connecting that controller. Then plug the second receiver into the XBOX and follow the procedure above for connecting that controller. Continue connecting them one at a time until all your controllers are connected. You may use up to 16 of these controllers in one area without interfering with each other.TURBO&CLEAR FUNCTIONS: Use the Turbo function for auto repeat(auto fire). When activated, this will cause the selected button to repeat its function until you release the button .TO SET AN ACTION BUTTON TO TURBO: Press and hold the TURBO button. Press and release any action buttons you want to put into Turbo mode, then release the TURBO button. (You can set A, B, X, Y, Black, White, Right and left Triggers to Turbo mode.)TO CLEAR THE TURBO FUNCTION FROM AN ACTION BUTTON: Press and hold the Clear button. Press and release any action buttons you wish to cancel, then release the Clear button. The action buttons you pressed will now return to their original function.SLEEP MODE: Sleep Mode is smart feature for saving battery life. If the Controller is left alone without movement for 2 minutes, It enters sleep mode. If you want to continue play, press on any key. This feature allows player to save battery life if you forget to turn off the power switch. TROUBLESHOOTINGIf you turn a controller off and on ,or unplug a receiver you may lose the connection between that controller and receiver. If you have lost the connection, unplug the receiver and turn off the controller. Plug the receiver in and press the connect button on the receiver. Turn the controller on, and if necessary, press the connectWARNINGRead, follow & understand all warnings in this manual, your video game system instruction manual & video software for safety, health & other informationDo not submerge in waterDo not disassemble any part of controller & receiverDo not place heavy objects on top of controller & receiverDo not allow small children to play with controller & receiver unsupervisedDo not use this controller in any other way than its intended use Do not unplug controller cable while the console is turned on Keep away from areas where dirt or liquid can get into controller & receiverKeep away from extreme temperaturesStore in areas away from dust and humidityTurn off or discontinue use of Vibration function if you have any hand or wrist ailments or if you have any injury's to which the vibration creates discomfort to you in any way button on the controller. Whenever you are trying to connect a receiver and controller, unplug the receiver and turn off the controller and follow the steps outlined above in Setup for each controller. AnalogControl SticksBackStartDirectionalPadConnectClearVibration TurboActionButtonsAnalogControl SticksControl SwitchConnectButtonConnectLEDPower LEDDual Slots For Memory Card & Other PeripheralsAnalog TriggersOFF 1 2 Vibration
Federal Communications Commission (FCC) Statement 2.4GHz PS2 GAME PAD FCC ID: FSUGG000B This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: - Reorient the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. CAUSION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

Navigation menu