KYE SYSTEMS GG000O Bluetooth Adapter User Manual BT 100R

KYE Systems Corp Bluetooth Adapter BT 100R

User Manual

ENGLISH
1
LED Display
Pairing Blue LED flashes quickly
Paired Blue LED flashes slowly
AUX IN, BT
standby
Blue LED flashes slowly
Charging
Red LED on, then turns off when fully
charged
Battery Low
Red LED flashes slowly (see Battery
recharging)
Bluetooth Pairing
1.After you have connected your headphone or speaker cable to
the BT-100R, you can turn on the BT-100R by switching the
slide switch to “On” and the blue LED will flash slowly. When it
ENGLISH
2
starts to flash quickly, this means it is entering pairing mode.
2.When you activate your device's Bluetooth function, it will
begin to search for the device. You will find “Genius BT-100R”
on your device's Bluetooth list and then you can connect it.
3.When pairing is successful, the blue LED will flash slowly.
Note 1: Most devices do not require you to key in the pin code. If
a pin code is required, key in “0000”.
Battery recharging
If the lithium battery is low and requires charging, just attach the
USB cable to the receiver and your PC/notebook.
Bluetooth music receiver connects wired speakers/headphone
to Bluetooth music devices
ENGLISH
3
Warning:
Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
ENGLISH
4
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
_ Reorient or relocate the receiving antenna.
_ Increase the separation between the equipment and receiver.
_ Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
_ Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions : (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
ENGLISH
5
undesired operation.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions All the safety and operating
instructions should be read before this product is operated.
2. Keep these instructions – The safety and operating instructions
should be retained for future reference.
3. Heed all warnings – All warnings on the appliance and in the
operating instructions should be adhered to.
4. Follow all instructions – All operating and use instructions
should be followed.
5. Do not use this apparatus near water – The appliance should not
be used near water or moisture – for example, in a wet basement
or near a swimming pool, and the like.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance
with the manufacture’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Only use attachments/accessories specified by the manufacturer.
10. The battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
CAUTION
Danger of explosion if battery is incorrectly replaced. Replace only
ENGLISH
6
with the same or equivalent type.
This marking indicates that this product should not be disposed with
other household wastes throughout the EU. To prevent possible harm
to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material
resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe
recycling.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important operating
and maintenance instructions in the literature accompanying the
appliance.

Navigation menu