KYE SYSTEMS GKZGV Wireless Keyboard User Manual

Download:
Mirror Download [FCC.gov]
Document ID	654044
Application ID	xXVMaJfKuqUIoQUBTk4I3A==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	61.18kB (764758 bits)
Date Submitted	2006-05-02 00:00:00
Date Available	2006-04-28 00:00:00
Creation Date	2006-04-26 16:33:06
Producing Software	MFPImgLib V1.0
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual
Document Creator	TOSHIBA e-STUDIO

Hardware Installation
I You can comm lhc rcculvcr m a USB pun ol'cllhcl a PC m Notebook
ll you “um to connect mum, lu PC m .
Mummy magimfilxeeuylswc gall emulu ,
Dona
mv un- m- awn 7
cmnuleulm ”WWW
m enamel Euncm
an litmus-m]
v 3
x ammo marge hanerv
4. mm on yum mmpulen
5 Mm you open Windnws, please press the bumn under the receiver fixst and Ith puss the bunch undex the mouse for
channel semng Make Jar: mh butmn pres: fall" at um lhm seconds
a. Flmlumeyouusethisploduct,plcnscmnonnlfmrmlm(hmrcclm'gclhcbmlm salluusl mo 16 hours
Wammg-
l, Please do not use Wireless puwul Scroll MlEyc on 1 desk mm is made of glass, mum mm, or black velvet. Also, u flat
surface ls necessary or the Optical 5mm could be envr easily. when you usa wireless I’owclScmll ways on a desk mat
ls made of men], ny using a pad and leans: sh: raccwmg dlsmncc.
1 Before Lhz first installniun ls completed (channel setting ready). the muse wlll nnl work in DOS.
3 The “llflcfiN Pom, l . ll M) .)L channel pmvldes 256 l'DAcodes, Ind I! zummnmlly selects flu 1D 01 for your mouse Ynu
I‘mv(~x§l'lull NIXE; l ms in
can only set up one Wm’ll‘ss I’llwu ll NBEyc at x lime. But lfyou have additional Wirelc
an men of 10 square meters, mane lnlerferenoe Wlll occur between the recelvef and your mouse
4 lf you feel Ihe mouse does not move smoolll as usual, ml Lhc baneries have lost Lhelr charge. so please replace lhem u;
usulg llll» USE bullcl)’ (hunger Y uhlc lmcululgmll lhl‘ halluuls Tm- L[21)ll(m(lu>e’x l'dll slums lulllln—ll-lzhargln; mm
fmm slllmug m um um [ill bAlrrry full. filtehlidlfififill E3
batteries.
5 ll you rlccd m buy new Muslim, plcmc ehlmsc Nl-MH (NlckclrMcmLHydn'de) lullcnw mlh AAA suc 550 to 7m) mAH
and L1 Volmgcs
Software Installation
1 Make sure the mouse is connected (0 me cumpum
2. nu Semp m disk (or CD) um the disk dxive.
3 Polluw the inslmcnons on the screen ID film!) we softwue insmllahon
._ w” W. .
Channel Button
(LED Shows
dam iranimlsilbn)
MngiL»Roller
RightButlon L/my
Nu Button
LED mm: mm
lcrhzrgmg status
Left Button
Magic-Roller Press the “Magic-Roller” to surf the Internet and Windows
documents
PrDVides traditional mouse functions such as click, double click and
drag.
Right Button You can assign this button frequently used keyboard and mouse
functions in addition to features like Easylump, Auto-Panning,
Left Button
Zoom, etc.
Roller Button You can assign this button frequently used keyboard and mouse
functions in addition to features like EasyJump, Auto-Panning,
Zoom, etc.
MouseMate Software Features
Browsing Speed You can adjust the browsing speed when you surf the Internet or
Windows documents.
Browsing Direction Move the “Magic-Roller” forward and the screen will browse to
the top of the document. Move it in reverse and the document
will go in the opposite direction
Button Find Automatically positions the cursor on the default button, usually the
OK button, when the dialog box appears on your screen.
Trails This option makes it easier to find the cursor when using an LCD monitor
This option cannot be used if your monitor does not support it.
Loop When you move the cursor to the top (or bottom) of the screen, it will
automatically move the cursor to the bottom (or top) of the screen.
Mouse Speed This function lets you adjust the speed at which the pointer moves
across Illé SCIESH
Double Click Speed Use this function to set the double click speed of the mouse.
Swap left/Right Select this option if you want to have the mouse operate with the
nght mouse button as the primary button.
Pomters Folders This lets you change the shape of the cursor.
Office Mode Only supports Microsoft Office 97 along with some new applications.
Features include zoom, scrolling and Auto-scrolling features. It's
similar to Microsoft‘s LntelliMouse.
Genius Mode Supports all applications that use scrollbars, including Office97, with
zoom, Auto-panning, and scrolling functions.
About Click here to open the Genius Homepage “WWw.geniusnet.com.tw”
Orientation This function lets you set the angle when you move the mouse upward,
_..=
it a-
function works best with a portable trackball.
Easylump for Windows
Easylump lets you open eight special functions quickly.
Close AP Close the application you are usrng,
Horizontal Moves the cursor to the horizontal scroll bar.
Vertical Moves the cursor to the vertical scroll bar.
Start Activates the Windows Start menu.
Internet Access This function opens Browser to access the Internet.
Help This opens the Help menu.
Control Panel Opens the mouse control panel.
Auto»Panning Move the mouse, and the document will move in the direction you
move the mouse.
When the right-button or Magic~Roller is set to “Switch AP",
you can quickly switch from one open application to another
without moving the mouse. To switch to a specific
application, press the the right button or the Magic-Roller to
Switch Applications
select the application,
Zoom function for Office and IE Applications
Press the “Ctrl” key and move the “Magic-Roller” forward (or backward) to set
the Zoom In/Out function You can also use just one hand to Zoom ln/Out: set
the right button to be the “Ctrl” function, press the right button and move the
“MagieRoller” forward (or backward) to enlarge (or decrease) the document
window.
Auto-Panning
You can set this function in the Button Assrgnment menu. Move the mouse, and
the document moves in the direction you jUSl moved.
Unrnstall the software
Follow these instructions to remove the software from your hard disk. In
Windows 95/98/NT, click on the Start button, select Programs and move to the
'mouse software. Then click on Uninstall software.
Customize the software
This section shows you how to customize the software. To open the software
control panel, you can double-click on the icon in the task bar or select the
“software” icon from the program group.
Close the Software
Click the right button on the taskbar, and select “Close the software” to close the
software
Hardware Installation
i install two rechargeable AA batteries into the mouse and
two AAA batteries into the keyboard.
2. Plug in your USB receiver to a USB port of your PC.
3 Turn on your PC.
Software Installation
1. Place your CD driver in your PC drive for software
installation
2 Follow the instruction on the screen to finish the software
installation
Replace Batteries
When your mouse or keyboard does not work properly, then
the batteries have lost their charge, so please replace them.
(Warning: please do not mix or use different types of batteries
at the same time)
lD Channel Setting
The channel ID is factory preset. The green LED (data
transmission indicator) Will be lit constantly when the wireless
device is in normal operation. in case your wireless devices do
not work, please reset the ID channel by:
1. Press the connect button on the receiver and the light will
be blinking for connection.
2. Press the connect buttons of the keyboard and mouse
Within 20 seconds
3 To confirm the connection of the Wireless devnces, the LED
light will be lit constantly for approximately three seconds
and will turn off after being connected.
Charger and charging usage
1. The charger device can be used to recharge both AA and
AAA batteries; two batteries must be charged
simultaneously.
2. Make sure that only rechargeable batteries (NiMH~
Nickle-MetaI—Hydnde) batteries are used and placed in the
correct posmon.
3. For safety, the charger ieatures a recognition function for
alkaline batteries placed and/or when the batteries are not
placed in the correct polarity direction; resulting in
charger's LED Light to blink between green and red to
indicate a warning.
batteries are fully charged
5 The Hub on the charger is desrghed for a dongle receiver
or other USE accessories (such as mouse, flash memory
stick).
Warning (Trouble shooting)
1. Please do not use the Wireless optical mouse on a surface
that is made of glass, iron, black velvet or a desk that 45
made of metal, as they Witt reduce the operational distance
of the keyboard and mouse
2 The Wireless desktop set provrdes 256 D codes, and it
selects the D ii for your Wireless devrces You can only set
up one Wireless desktop at a time When you have another
27Mhz Wireless desktop set Within 10 square meters. there
may be interference between the wireless devices,
3. The Wireless mouse uses an IR sensor and no light Will be
shown lust like an ordinary optical mouse
4 Vou need to place two AA or AAA rechargeable batteries
simultaneously in the charger tor it to charge correctly
5. Please do not mix or use different types of batteries in the
battery charger such as Li—ion, NiCd, Alkallne, etc
6. The charging current of the charger is approximately
ztOmA, please connect the charger devrce directly to a PC
or a safe power devrce (HUB device With power adaptor)
Notes on Battery Usage
When you use the battery‘ carefully read and strictly observe the
Safety Instructions and the notes described below
I Different battery types and surrounding temperatures may
affect the battery pertormance
l Av0id using batteries in extremely cold environments as low
temperatures can shorten the battery life and reduce Wireless
devrce performance
a It you are using the new rechargeable battery or rechargeable
batten/ that has not been used for an extended period of time
(batteries that pass the expiry date are exceptions) might
aftect the number of pictures that can be taken Therefore, to
maximize their performance and lifetime, we recommend that
you fully charge the batteries and discharge them tor at least
one complete cycle before use
I The battery may feel warm when usmg the Wireless device (or
an extended period of time or using the flash continuously.
This is normal and not a mattUanIOfl,
I The wireless device may leel warm when being used
continuoiisty or for an extended period of time This is normal
and not a malfunction
I If you Will not be using the batteries for an extended period of
time, remove them from the Wireless device to prevent
leakage or corrosion.
Always keep the terminals in a clean state
Never use manganese batteries
Risk of explosion it battery is replaced by an incorrect type
Dispose of used batteries according to the instructions
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions.
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received,
including interference that may cause undesired opeiation.
Per FCC 1521, you are cautioned that changes or modifications
not expressly approved by the part responsible for compliance
could void the user’ 5 authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Type                            : Info
Producer                        : MFPImgLib V1.0
Create Date                     : 2006:04:26 16:33:06
Creator                         : TOSHIBA e-STUDIO
Page Count                      : 6

EXIF Metadata provided by EXIF.tools