KYE SYSTEMS GKZHF AGAMA, KM-820 User Manual Agama KM 820 man ENG R B 03 15
KYE Systems Corp AGAMA, KM-820 Agama KM 820 man ENG R B 03 15
Users Manual
ENGLISH
1
Hardware Installation
1. Install one AAA battery into the mouse and two AAA into the
keyboard.
2. Plug in your USB receiver to a USB port of your PC.
ID Channel Setting and connection:
Follow these steps:
1. The Pico dongle is stored inside of the mouse, plug it into a USB
port and wait about 5-10 seconds.
2. The connection will be executed and the kit will be ready for use.
Replace Batteries
If the mouse or keyboard does not work properly, then the batteries
have lost their charge, so you need to replace them.
Warning: do not mix or use different types of batteries at the same
time.
“Warning (Trouble shooting)
1. In case the wireless device was not connected when you set the
ID channel setting, check if you have installed the batteries with
the positive (+) and negative (-) polarity in the correct position,
then repeat the ID channel setting again.
2. For optimum performance, please make sure that the distance
between the wireless device and the micro dongle receiver does
not exceed 10M.
ENGLISH
2
Keyboard hotkeys and Fn-Keys definition:
Fn Function keys:
+
Turn down the volume.
+
Turn up the volume.
+
Remove the sound.
+
Go back to the previous track
+
Play and pause the audio or video sources.
+
Stop play of audio or video CD.
+
Skip to the next track
ENGLISH
3
+
Active Windows Media Player
+
Open browser in Netscape or IE.
+
Open mail folder.
Mouse Button Assignments
1. Left Button: Provides traditional mouse
functions like click, double click and
drag.
2. Magic-Roller: Scroll the button to surf
the Internet and Windows documents.
3. Right Button: Provides traditional
mouse click
Notes on Battery Usage
When you use the battery, carefully read and strictly observe the
Safety Instructions and the notes described below:
Different battery types and surrounding temperatures may affect
the battery performance.
Avoid using batteries in extremely cold environments as low
temperatures can shorten the battery life and reduce wireless device
performance.
If you are using a new rechargeable battery or rechargeable battery
that has not been used for an extended period of time (batteries that
pass the expiry date are exceptions) it might affect the period of
time you can use this device. Therefore, to maximize their
performance and lifetime, we recommend that you fully charge the
batteries and discharge them for at least one complete cycle before
use.
ENGLISH
4
The battery may feel warm when using the wireless device for an
extended period of time or using the flash continuously. This is
normal and not a malfunction.
The wireless device may feel warm when being used continuously
or for an extended period of time. This is normal and not a
malfunction.
If you will not be using the batteries for an extended period of time,
remove them from the wireless device to prevent leakage or
corrosion.
Always keep the terminals in a clean state.
Never use manganese batteries.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
ENGLISH
5
Note: Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment. (15.21)
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may cause
undesired operation.(15.19(a)(3))