KYE SYSTEMS GMPEN User Manual 39064

Download:
Mirror Download [FCC.gov]
Document ID	39064
Application ID	aAqWwqK3hitEX5LiJ/gMag==
Document Description	8
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	54.1kB (676190 bits)
Date Submitted	1999-05-27 00:00:00
Date Available	1999-07-16 00:00:00
Creation Date	2001-06-25 22:52:58
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2001-06-25 22:53:00
Document Title	39064.pdf
Document Author:	jsoscia

EUT: TABLET
FCC ID:FSUGMPEN
KYE SYSTEM CORP.
USER’S MANUAL
l glen DI
a {BIT D
FEDERAL COMMUNICATIONS COMMISSION
NOTE
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection This equipment generates, uses and can radiated radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation If this equipment
does cause harmful interference to radio ortelevision reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-Reorient o relocate the receiving antenna.
-lncrease the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help,
Changes or modifications not expressly approved by the party responsible for
compliance could void the user‘s authority to operate the equipment.
Information Folder
. General Information
The Information Folder has general information about the Genius Tablet such as
version, corporation name and linking to Genius Web Site,etci
Basic Folder
- Changing the Tablet Orientation ,= -
Orientation allows you to rotate the Genius Tablet 90 degrees. Landscape is the
normal operating position (with the tablet's interface cables exiting the top of the
tablet).Selecting Portrait allows you to rotate the tablet 90 degrees clockwise from the
normal operating position (so the tablet's interface cables would be exiting from the
right hand side of the tablet) Try changing to portrait orientation if you prefer using
your tablet in a vertical orientation, like a typical sketch pad.
0 Double-Click Test
In the Double-Click Test Box, you can set the widest and highest distance between the
two points of double click and you can set the speed of double click by dragging the
pointer on the slider bar or clicking on the slider bar. Then test the speed in the
"Smiling" areal
- Tracking Mode
The Tracking Mode function allows you to switch how the Genius Tablet moves the
screen cursor.
The Absolute tracking mode is the normal (default) tablet mode. In absolute mode
the screen is directly mapped to the tablets active area. In this mode, the lower left
comer of the tablet's active area corresponds to the lower lefi comer of the screen. the
upper right comer on the tablet corresponds to the upper right comer of the screen. etc.
When you place a pointing device on the tablet. the screen cursor would jump to the
location on the screen that directly corresponds to the position on the tablet. You’ll
notice that you don‘t have to ”row'I the cursor (eg, pick up and move over and move
again) like you often have to do with a conventional mouse.
On the other hand. in Relative tracking mode you move the screen cursor just like you
would with a mouse. In relative mode it's possible to find yourself with the screen
cursor atone side of the screen, while your pointing device is at the opposite side of
the tablet. In that case. you would have to pick up and move your pointing device
just like you would do with a mouse. You can set the Relative Resolution in this area
by clicking the bar. The resolution means the number of pixel in an inch. The
resolution is higher on the right side than on the left side.
0 Tablet Information
You can see the width and height of the tablet in this area.
0 Adjust the Resolution in Absolute Mode
In the Resolution area. you can set the resolution of the tablet in absolute tracking
mode. The resolution refers to the number ofpixel in an inch. You can set it from 254
it) 2540.
Button Assignment Folder
- Use the Button Assignment Flint: fir’i” ‘
The Button Assignment function allows you to change the function of the buttons on
your pointing device. Select which pointing device you are using from the Pointing
Device list. This would allow you to change the functions assigned to the different
buttons on that device. Simply pick the button in the Assignment area that
corresponds to the pointing device button you wish to change and then select from the
function list the function you wish to assign to that button. You can set the function of
your button as Left Click, Right Click, Middle Double Click. Copy, etc.
Eu’um1 {Len Click ']
f" 158mm Fucl’
3 Bulton z lFlighl Click v
Working Area Folder
0 Adjust Working Area
The default option is the Whole Tablet.
When the Tracking Mode in the Basic folder is Absolute, you can define the tracking
area as your require. This is especially useful if you have a large tablet and you want
to define a smaller active area so you don't have to move the pointing device around
so far on the tablet.
In order to set the tracking area:
1) Choose the Preserve Aspect.
2) Click on the Define button, then the define area will turn grey.
3) Click on any button in the define area, drag the puck, then click the button again.
The area will be defined, Some information about the defined area such as Top,
Bottom, Right, Lefi, Width, Height will appear in the Area Information. You can
change the units from inch to centimeters If you change it ,the number information
will also be changed.
You can input the number of Left, Top, Right, Bottom, Width and Height or click on
these up-down controls in the Area Information as you require, then the working area
will be defined.
Tuhlei Properties
Test Folder
- Test Your Buttons
In this area. you can verify if all of your pointing device buttons are operating
properly, Move your pointing device around the tablet and press the buttons (and the
pen tip, if using a stylus). You will see the position of the cursor on the screen in the
Model Name area, and the button in this area will flash to respond to the button
presses. When you move your puck in the test area on the right side , you will see
trails remain responding your button's movement. Click on "clear" to clear this area.
Tablet Properties
Mini Pen Introduction
1.Introduction
The Mini Pen is a graphics tablet that translates X-Y dimensional data into computer
readable information in cordless pen. Its many use include :
Guiding the cursor on a computer screen.
Picking up location on application template,
Hand writing and electronic signature
.Free hand talking on Internet conference and white board.
Mini Pen is the best tool for pen computer that includes both absolute and relative
cursor expression modes. It uses the latest advances electromagnetic technology,
which make it accurate and reliable. The Mini Pen tablet combine all the advantages
of a mouse and graphics tablet to eliminate multiple input devices and to provide a
simplified desktop. You can ‘map’ your tablet to correspond to the monitor screen,
meaning if you place your pen at a specific location on the tablet, your screen cursor
will also move to that location on the monitor,
ram
Knuwlnlge-led-Emlm
m--. 1
Mini pen Fundamental Specificmlnn
2.Fundamental Specification
Platform Support
Hardware Interface
Soflware Driver GeniTab II for Windows3.x, 95, 98, NT3,x , 4.x
Resolution 508LPI
Accuracy 0.01 inch
Proximity 10 mm from surface of tablet
Working Area Horizontal : 3 inches , Vertical : 2 inches
Baud Rate Up to 19200
Up to 115 RPS in 9600 baud
5 or 3 bytes binary format
Power Source RS—232
Operation mode Stream, SW stream Point, Remote Request etc
Technology Electromagnetic
Cursor Support S-O9B-E
FCC CLASS B, CE, BCIQ approved
EKYE
Knuvdadga-Yxeld-Exullence
Page: 2
Mini Pe- Opemion Characteristic
3.0peration Characteristic
1.Tablet : Easy plug and works on RS-232 port with (H) 3 x (V) 2
inches sketching area.
2.Stylus : A ball point pen like pointing device , that delivers
electromagnetic flux to tablet to point out where position is.
One tip button like mouse “lefi button” and barrel button as
“right and middle button” . Both tip and barrel button
function are definable by user’s choice.
3.Button operation force :
Tip button: 50 i 30g
Barrel button: 100 i 50g
5.Status indicator on tablet :
Continuous light on to express STYLUS locates in sensing
altitude, means in proximity.
Blinking express STYLUS locates out sensing altitude, means
out proximity.
4.Sketch template :
A very thin film that help you wsy to express art of
Writing and sketching.
Palms
aniadgc-Yield-Emlhwe

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : Yes
Create Date                     : 2001:06:25 22:52:58
Producer                        : Acrobat Distiller 4.0 for Windows
Author                          : jsoscia
Title                           : 39064.pdf
Modify Date                     : 2001:06:25 22:53:00-04:00
Page Count                      : 12

EXIF Metadata provided by EXIF.tools