KYE SYSTEMS GMZGH Wireless Optical Mouse User Manual manua Eng

KYE Systems Corp Wireless Optical Mouse manua Eng

Manual

Hardware Installation1. You can connect the receiver to a USB port of either a PC or Notebook. 2. If you want to connect receiver to PC or recharge the batteries, please using the USB battery charger Y cable. (Please do notconnect the receiver directly to PC that was placed under a table, or you will get RF performance decreased easily.)3. Install two AAA rechargeable batteries in the mouse. (Please do not put un-rechargeable batteries into mousewhen you are charging the batteries that will make your mouse or main-board broken or burning!) 4. Turn on your computer.5. After you open Windows, please press the button under the receiver first and then press the button under the mouse forchannel setting. Make sure each button press is for at least three seconds.6. First time you use this product, please run out of remains then recharge the batteries at least 12 to 16 hours.Warning:1. Please do not use Wireless WebScroll+ NBEye on a desk that is made of glass, mirror, iron, or black velvet. Also, a flatsurface is necessary or the Optical Sensor could be error easily. When you use Wireless WebScroll+ NBEye on a desk thatis made of metal, try using a pad and reduce the receiving distance.2. Before the first installation is completed (channel setting ready), the mouse will not work in DOS.3. The Wireless WebScroll+ NBEye channel provides 256 ID-codes, and it automatically selects the ID # for your mouse. Youcan only set up one Wireless WebScroll+ NBEye at a time. But if you have additional Wireless WebScroll+ NBEye sets inan area of 10 square meters, more interference will occur between the receiver and your mouse.4. If you feel the mouse does not move smooth as usual, that the batteries have lost their charge, so please replace them orusing the USB battery charger Y cable to recharging the batteries. The LED of mouse’s tail shows battery-recharging statusfrom shining to die out till battery full. You should set up channel again every time you replacebatteries.5. If you need to buy new batteries, please choose Ni-MH (Nickel-Metal-Hydride) batteries with AAA size, 550 to 700 mAHand 1.2 Voltages.6. The Wireless WebScroll+ NBEye with radio frequency gives you free movement and an enjoyable experience. For optimalperformance, place the receiver at least 8 inches (about 20 cm) away from the mouse and other electrical devices, such asthe computer, monitor, and etc.Software Installation1. Make sure the mouse is connected to the computer.2. Put Setup the disk (or CD) into the disk drive.3. Follow the instructions on the screen to finish the software installation.
Factory Setting Magic-Roller Press the “Magic-Roller” to surf the Internet and WindowsdocumentsLeft Button Provides traditional mouse functions such as click, double click anddrag.Right Button You can assign this button frequently used keyboard and mousefunctions in addition to features like EasyJump, Auto-Panning,Zoom, etc.Roller Button You can assign this button frequently used keyboard and mousefunctions in addition to features like EasyJump, Auto-Panning,Zoom, etc.MouseMate Software FeaturesBrowsing Speed You can adjust the browsing speed when you surf the Internet orWindows documents.Browsing Direction Move the “Magic-Roller” forward and the screen will browse tothe top of the document. Move it in reverse and the documentwill go in the opposite directionButton Find Automatically positions the cursor on the default button, usually theOK button, when the dialog box appears on your screen.Trails This option makes it easier to find the cursor when using an LCD monitor.This option cannot be used if your monitor does not support it.Loop When you move the cursor to the top (or bottom) of the screen, it willautomatically move the cursor to the bottom (or top) of the screen.Mouse Speed This function lets you adjust the speed at which the pointer movesacross the screen.Double Click Speed Use this function to set the double click speed of the mouse.Swap Left/Right Select this option if you want to have the mouse operate with theright mouse button as the primary button.Pointers Folders This lets you change the shape of the cursor.Office Mode Only supports Microsoft Office 97 along with some new applications.Features include zoom, scrolling and Auto-scrolling features. It’ssimilar to Microsoft’s IntelliMouse.Genius Mode Supports all applications that use scrollbars, including Office97, withzoom, Auto-panning, and scrolling functions.About Click here to open the Genius Homepage “www.geniusnet.com.tw”Orientation This function lets you set the angle when you move the mouse upward.It gives you a more comfortable angle when holding the mouse. This
function works best with a portable trackball.EasyJump for WindowsEasyJump lets you open eight special functions quickly.Close AP Close the application you are using.Horizontal Moves the cursor to the horizontal scroll bar.Vertical Moves the cursor to the vertical scroll bar.Start Activates the Windows Start menu.Internet Access This function opens Browser to access the Internet.Help This opens the Help menu.Control Panel Opens the mouse control panel.Auto-Panning Move the mouse, and the document will move in the direction youmove the mouse.Switch Applications When the right-button or Magic-Roller is set to “Switch AP”,you can quickly switch from one open application to anotherwithout moving the mouse. To switch to a specificapplication, press the the right button or the Magic-Roller toselect the application.Zoom function for Office and IE ApplicationsPress the “Ctrl” key and move the “Magic-Roller” forward (or backward) to setthe Zoom In/Out function. You can also use just one hand to Zoom In/Out: setthe right button to be the “Ctrl” function, press the right button and move the“Magic-Roller” forward (or backward) to enlarge (or decrease) the documentwindow.Auto-PanningYou can set this function in the Button Assignment menu. Move the mouse, andthe document moves in the direction you just moved.Uninstall the softwareFollow these instructions to remove the software from your hard disk. InWindows 95/98/NT, click on the Start button, select Programs and move to themouse software. Then click on Uninstall software.Customize the softwareThis section shows you how to customize the software. To open the softwarecontrol panel, you can double-click on the icon in the task bar or select the“software” icon from the program group.Close the SoftwareClick the right button on the taskbar, and select “Close the software” to close thesoftware.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio ortelevision reception, which can be determined by turning the equipment offand on, the user is encouraged to try to correct the interference by one of thefollowing measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: To assure continued compliance, (example - use only shieldedinterface cables when connecting to computer or peripheral devices). Anychanges or modifications not expressly approved by the party responsible forcompliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions: (1) This device may not cause harmfulinterference, and (2) this device must accept any interference received,including interference that may cause undesired operation.

Navigation menu