KYE SYSTEMS GMZGN Wireless Mouse User Manual Wireless NetScroll
KYE Systems Corp Wireless Mouse Wireless NetScroll
Manual
Wireless NetScroll+ Superior Mouse Installation Guide
Introduction
This mouse device with its innovative shape will give you better comfort, quality, and
control over a long period of time. It has plug and play features and is very easy to
install.
Installing Wireless NetScroll+ Superior mouse driver for Windows 98
1. 1. Insert the mouse driver diskette in to Drive A (or B).
2. Click on the Start button in the Windows 98 task bar, the select Run
3. Type A:\SETUP (or B:\SETUP) and click on OK
the USB supplement will automatic installation.
4. Follow on the on-screen messages to finish the installation procedures then the
Windows will restart.
5. The system will detect the USB mouse when you plug in the mouse to PC
system and display a dialog box on screen. Please input “A:\” in the box then
mouse can work property after installing driver.
Cleaning Your Mouse
You can protect your mouse by keeping your work area clean and free from dust.
Note: Make sure the system is off before you attempt to clean it
1. Remove the ball by turning the ball retainer counter-clockwise until it becomes
loose.
2. Use a soft or non-abrasive cleaner to clean the ball and rollers. You can also use a
cotton swab to clean the ball container.
3. Reinstall the ball and the ball retainer.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.