KYE SYSTEMS GMZI6 Navigator 700 Laser User Manual mouse
KYE Systems Corp Navigator 700 Laser mouse
manual
ENGLISH
1
Hardware Installation
1. Install AA battery in the mouse.
2. Plug in the USB receiver to a USB port of your PC.
3. Turn on your PC.
Software Installation
You can download the software from www.geniusnet.com. Go to Service &
Support and select “Drivers”. In Product Line, select “Keyboard & Mouse
combination”, then go to “Select Model” and select “KB 600”. Then select the
OS you are using. Click on the file name to start the download. Once you have
downloaded the driver to your PC, click on the file name to start the software
installation. Just follow the instructions shown on the screen to complete the
installation.
Important Notice
1. Default hotkeys operate immediately when using Windows XP or above.
2. When the mouse is in sleep mode (power saving mode), press any button
on the mouse to wake it up.
ID Channel Setting
The channel buttons are factory preset. The green LED, the data transmissions
indicator on the receiver will be lit when the keyboard or mouse is in normal
operation. If the keyboard / mouse do not work then you have to reset the ID
channel setting. Please press the connect button on the receiver first and press
the connect buttons under the mouse and keyboard within 20 seconds.
“Warning (Trouble shooting)
ENGLISH
2
1. The wireless desktop set provides 256 ID codes, and it selects the ID
# for your wireless devices. You can only set up one wireless desktop
at a time. If you have another 27Mhz wireless desktop set within 10
square meters, there may be interference between the wireless
devices.
2. Although the mouse has been granted eye safety certification, it is
strongly suggested that direct eye contact with the laser lens be
avoided.
3. To use MSN and Lock function, the software must be installed.
4. To re-program other media programs, software installation is
required.
Button Assignments
1. Left Button: Provides traditional mouse functions like click, double
click and drag.
2. Right Button: Provides traditional mouse click function
3. Magic-Roller: Scroll the button to surf the Internet and Windows
documents.
Notes on Battery Usage
When you use the battery, carefully read and strictly observe the Safety
Instructions and the notes described below:
Different battery types and surrounding temperatures may affect the
battery performance.
Avoid using batteries in extremely cold environments as low temperatures
can shorten the battery life and reduce wireless device performance.
If you are using a new rechargeable battery or rechargeable battery that has
not been used for an extended period of time (batteries that pass the expiry
date are exceptions) it might affect the period of time you can use this
device. Therefore, to maximize their performance and lifetime, we
ENGLISH
3
recommend that you fully charge the batteries and discharge them for at
least one complete cycle before use.
The battery may feel warm when using the wireless device for an extended
period of time or using the flash continuously. This is normal and not a
malfunction.
The wireless device may feel warm when being used continuously or for
an extended period of time. This is normal and not a malfunction.
If you will not be using the batteries for an extended period of time,
remove them from the wireless device to prevent leakage or corrosion.
Always keep the terminals in a clean state.
Never use manganese batteries.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.