KYE SYSTEMS GMZI9 Wireless Mouse User Manual Numpad C600 English
KYE Systems Corp Wireless Mouse Numpad C600 English
user manual
ENGLISH
1
\Hardware Installation
• Connect the USB keyboard and USB receiver to your PC (USB
port).
• Install two AAA batteries in the mouse.
USB Hub notice
Numpad C600 provides a two-port USB
Hub 2.0. You can plug an appropriate USB device into a USB port on
the keyboard.
Before you start
• The USB port on this keyboard is a “high power, bus-powered
device”, not a “self-powered device”; that is the electrical power of
this keyboard is supplied by the host computer, not by itself. If the
PC system power does not supply 5V and 500mA for the USB port or
USB HUB of BUS POWER, it might not be available.
• USB Hubs have additional ports that let you connect multiple devices
together. In general, you can connect up to two individual USB
peripherals at one time in a PC system, like a mouse, joystick, etc.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
RF exposure warning ·
This equipment must be installed and operated in accordance with provided instructions
and the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and installers must be
provide with antenna installation instructions and transmitter operating conditions for
satisfying RF exposure compliance.