KYE SYSTEMS GMZIL Navigator 900BT User Manual ENGLISH
KYE Systems Corp Navigator 900BT ENGLISH
User manual
English
1
Hardware Installation
1. Install two AA batteries in the mouse.
Pairing Process in Vista and Windows XP SP2
1. Open the Windows control panel, then
select “Bluetooth devices”.
2. Click
“Add…..”
3. Select “My device is setup and
ready to be found”, then click
“Next”.
English
2
4. Press and hold the “CONNECT” button under the mouse.
5. In “Peripherals (Keyboards,
mice, joysticks)”, select
Genius Bluetooth Mouse and
click “Next”.
6. Select “Don’t use a
passkey” and click
“Next”.
English
3
7. Windows will start to connect
the Genius Bluetooth Mouse
automatically. Press the finish
button after the connection
process is completed.
Once the connection between the
Genius Bluetooth Mouse and your
computer is established, the
connection will be kept permanently.
That means the connection will
re-establish automatically each time
you run Windows.
Pairing Process in Mac OS X 10.2.8 or later
1. Press and hold the “CONNECT”
button under the mouse.
English
4
2. Click the Bluetooth icon
on the task bar and select
“Setup Bluetooth device”.
3. Click “Continue” when the “Bluetooth Setup Assistant” appears.
English
5
4. Choose “Mouse”
and press
“Continue” to the
next step.
5. When Bluetooth
finds the “Genius
Bluetooth Mouse”,
please press
“Continue” to the
next step.
6. Click “Continue”
when the “Passkey
exchange with your
mouse” appears.
English
6
7. The connection is now successful and you can use your Genius
Bluetooth Mouse.
Now you can use the Genius Bluetooth Mouse wirelessly with a
Bluetooth enabled Apple computer. Afterwards, the connection of the
Genius Bluetooth mouse will re-establish automatically each time
Mac OS X runs.
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may
cause undesired operation.