KYE SYSTEMS GMZIZ MICRO TRAVELER 900S User Manual 01 900S ENG
KYE Systems Corp MICRO TRAVELER 900S 01 900S ENG
Users Manual
English
1
Hardware Installation
Note: Supports Windows 7/Vista/XP
1. You can connect the receiver to a USB port of a PC.
2. Install one AAA battery in the mouse.
3. Make sure that you have switched on the power switch underneath the
mouse.
4. Stick-N-Go: attach the ‘Click Mount’ on your notebook in a convenient
position first, then you can attach the mouse on your notebook as
shown to avoid dropping your mouse.
Warning: (Troubleshooting)
1. Do not use the wireless optical/laser mouse on a desk which is made of
glass or mirror.
2. The connection of the wireless device is factory preset, so when you
plug the USB receiver into any USB port, the connection between the
micro receiver and the mouse will be established automatically.
3. In case your PC did not install the hardware successfully, remove the
micro receiver from the USB port and go Human Interface Devices
under Device Manager to remove the mouse then plug in the micro
receiver to a USB port again.
4. If you feel the mouse does not move smooth as usual, it is possible the
batteries have lost their charge so you need to replace them.
Remember to put the batteries in the correct direction.
Factory Settings
1. Left Button: Provides traditional mouse functions like click, double
click and drag.
2. Magic-Roller: Press the “Magic-Roller” to surf the Internet and
Windows documents.
3. Right Button: Provides traditional mouse click functions.
Federal Communications Commission (FCC) Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits of a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in particular installations, if this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1. Reorient / Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that the receiver is
connected.
4. Consult the dealer or an experienced radio / TV technician for help.
CAUTION: Changes or modifications not expressly approved by the manufacturer
responsible for compliance could void the user’s authority to operate the equipment.
Disclaimer
The following does not apply to any country where such provisions are inconsistent
with local law: KYE Systems Corp. makes no warranties with respect to this
documentation, whether expressed or implied. All material is provided “as is”. This
includes, but is not limited to, any implied warranties of merchantability and fitness is
for a particular purpose. The information covered in this document is subject to
change without notice.
KYE Systems Corp. assumes no responsibility for any errors that may appear in this
document.
All brand names mentioned in this manual are trademarks or registered trademarks of
their respective companies.
Copyright © 2009 KYE Systems Corp. All rights reserved.