KYE SYSTEMS GMZJL TRAVELER 6000(GM-100016/T) User Manual

KYE Systems Corp TRAVELER 6000(GM-100016/T) Users Manual

Users Manual

Download: KYE SYSTEMS GMZJL TRAVELER 6000(GM-100016/T) User Manual
Mirror Download [FCC.gov]KYE SYSTEMS GMZJL TRAVELER 6000(GM-100016/T) User Manual
Document ID1453376
Application IDIAONRgpAm/4VQ6CmIZ/0Yw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.73kB (21582 bits)
Date Submitted2011-04-25 00:00:00
Date Available2011-04-25 00:00:00
Creation Date2011-04-21 11:03:45
Producing SoftwareAcrobat Distiller 9.0.0 (Windows)
Document Lastmod2011-04-21 11:03:45
Document TitleMicrosoft Word - 01-TRA 6000-ENG 說明書.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: RF99

English
Hardware Installation
Note: Supports Windows 7/Vista/XP
1. You can connect the receiver to a USB port of a PC.
2. Install one AAA battery in the mouse.
3. Make sure that you have switched on the power switch underneath the
mouse.
Factory Settings
1. Left Button: Provides traditional mouse functions like click, double click
and drag.
2. Magic-Roller: Press the “Magic-Roller” to surf the Internet and Windows
documents.
3. Right Button: Provides traditional mouse click functions.
Warning: (Troubleshooting)
1. Do not use the wireless optical/laser mouse on a desk which is made of
glass or mirror.
2. The connection of the wireless device is factory preset, so when you plug
the USB receiver into any USB port, the connection between the micro
receiver and the mouse will be established automatically.
3. In case your PC did not install the hardware successfully, remove the micro
receiver from the USB port and go Human Interface Devices under
Device Manager to remove the mouse then plug in the micro receiver to a
USB port again.
4. If you feel the mouse does not move smooth as usual, it is possible the
batteries have lost their charge so you need to replace them. Remember to
put the batteries in the correct direction.
English
FCC ID: FSUGMZJL
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject
to the following two conditions:(1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, according to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try correct the interference by one or more of the following measures:
1.Reorient the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into and outlet on a circuit different from that to
which the receiver is connected.
4.Consult the dealer or an experienced radio/TV technician for help.
Any special accessories needed for compliance must be specified in the
instruction manual.
Warning: A shielded-type power cord is required in order to meet FCC
emission limits and also to prevent interference to the nearby
radio and television reception. It is essential that only the
supplied power cord be used. Use only shielded cables to
connect I/O devices to this equipment.
CAUSION: Any changes or modifications not expressly approved by the
party responsible for compliance could void your authority to
operate the equipment.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : RF99
Create Date                     : 2011:04:21 11:03:45+08:00
Modify Date                     : 2011:04:21 11:03:45+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Creator                         : RF99
Title                           : Microsoft Word - 01-TRA 6000-ENG 說明書.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:9f93062d-a5c0-4b68-88d7-a7533b5c2dd5
Instance ID                     : uuid:83f9cae0-4dcf-4f30-88b7-dd2f890eb9e9
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: FSUGMZJL

Navigation menu