KYE SYSTEMS GMZJR TRAVELER 7000(GM-100019/C) User Manual

KYE Systems Corp TRAVELER 7000(GM-100019/C) Users Manual

Users Manual

Download: KYE SYSTEMS GMZJR TRAVELER 7000(GM-100019/C) User Manual
Mirror Download [FCC.gov]KYE SYSTEMS GMZJR TRAVELER 7000(GM-100019/C) User Manual
Document ID1528965
Application ID8XLH+DHZy8Hi91D4N4VWSQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.64kB (20506 bits)
Date Submitted2011-08-24 00:00:00
Date Available2011-08-24 00:00:00
Creation Date2011-08-22 09:26:02
Producing SoftwareAdobe PDF Library 10.0
Document Lastmod2011-08-22 09:26:06
Document TitleUsers Manual
Document CreatorAcrobat PDFMaker 10.1 Word 版
Document Author: Winiori

English
Hardware Installation
Note: Supports Windows 7/Vista/XP
1. You can connect the receiver to a USB port of a PC.
2. Install one AAA battery in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the
mouse.
Factory Settings
1. Left Button: Provides traditional mouse functions like click, double click and
drag.
2. Magic-Roller: Press the “Magic-Roller” to surf the Internet and Windows
documents.
3. Right Button: Provides traditional mouse click functions.
Note: Download the programmable driver from Genius website at
www.geniusnet.com
Warning: (Troubleshooting)
1. Do not use the wireless optical/laser mouse on a desk which is made of
glass or mirror.
2. The connection of the wireless device is factory preset, so when you plug
the USB receiver into any USB port, the connection between the micro
receiver and the mouse will be established automatically.
3. In case your PC did not install the hardware successfully, remove the micro
receiver from the USB port and go Human Interface Devices under Device
Manager to remove the mouse then plug in the micro receiver to a USB port
again.
4. If you feel the mouse does not move smooth as usual, it is possible the
batteries have lost their charge so you need to replace them. Remember to put
the batteries in the correct direction.
English
FCC ID: FSUGMZJR
FCC Compliance and Advisory Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:(1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital
device,
according to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try correct the interference by one or more
of the following measures:
1.Reorient the receiving antenna.
2.Increase the separation between the equipment and receiver.
3.Connect the equipment into and outlet on a circuit different from that to which the receiver is
connected.
4.Consult the dealer or an experienced radio/TV technician for help.
Any special accessories needed for compliance must be specified in the instruction manual.
Warning: A shielded-type power cord is required in order to meet FCC emission limits and
also to prevent interference to the nearby radio and television reception. It is essential that
only the supplied power cord be used. Use only shielded cables to connect I/O devices to this
equipment.
CAUSION: Any changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
IC statementThis Class B digital apparatus complies with Canadian ICES-003.Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Winiori
Comments                        : 
Company                         : Microsoft
Create Date                     : 2011:08:22 09:26:02+08:00
Modify Date                     : 2011:08:22 09:26:06+08:00
Source Modified                 : D:20110822012539
Subject                         : 
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2011:08:22 09:26:06+08:00
Creator Tool                    : Acrobat PDFMaker 10.1 Word 版
Document ID                     : uuid:a1c4dcd0-2a1b-4a85-a81a-55059c37d641
Instance ID                     : uuid:7408cf74-1552-4d8b-aace-15f314fb175b
Format                          : application/pdf
Title                           : 
Description                     : 
Creator                         : Winiori
Producer                        : Adobe PDF Library 10.0
Keywords                        : 
Page Layout                     : OneColumn
Page Count                      : 2
EXIF Metadata provided by EXIF.tools
FCC ID Filing: FSUGMZJR

Navigation menu