KYE SYSTEMS GMZKO Wireless Mouse User Manual NS 6005 ENG Manual5 29

KYE Systems Corp Wireless Mouse NS 6005 ENG Manual5 29

Manual.pdf

Genius English Wireless Mouse NS-6005 NS-6010 NS-6015 Model: GM-120030/S for NS-6005 GM-130001/S for NS-6015 GM-130002/S for NS-6010 Hardware Installation 1. You can connect the receiver to a USB port of a PC. 2. Install one AA or AAA battery in the mouse as instructed. 3. Make sure that you have switched on the power switch underneath the mouse. Note:  When you put the receiver into the storage slot, the power switch will turn off. You cannot use the mouse when the receiver is inside the mouse.  Battery life may vary based on user and computing conditions. Factory Settings 1. Left Button: Provides traditional mouse functions like click, double click and drag. 2. Magic-Roller: Press the “Magic-Roller” to surf the Internet and Windows documents. 3. Right Button: Provides traditional mouse click functions. Warning: (Troubleshooting) 1. Do not use the wireless optical/laser mouse on a desk which is made of glass or mirror. 2. The connection of the wireless device is factory preset, so when you plug the USB receiver into any USB port, the connection between the micro receiver and the mouse will be established automatically. 3. In case your PC did not install the hardware successfully, remove the micro receiver from the USB port and go Human Interface Devices under Device
Genius English Manager to remove the mouse then plug in the micro receiver to a USB port again. 4. If you feel the mouse does not move smooth as usual, it is possible the batteries have lost their charge so you need to replace them. Remember to put the batteries in the correct direction. FCC Warning：：：： Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: _ Reorient or relocate the receiving antenna. _ Increase the separation between the equipment and receiver. _ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. _ Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received,
Genius English including interference that may cause undesired operation Safety Warning：：：： Remark: Whenever new battery is installed, make sure that it is fresh 1.5V AA battery. A) Remove the battery cover. B) Insertone AA battery into the battery compartment, make sure to properly orient the positive(+) and negative(-) ends as specified by the marks in the battery compartment. Replace the battery cover and make sure it is locked. C) Switch on the mouse, the LED in bottom of mouse will blink. D) Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

Navigation menu