KYE SYSTEMS GMZKT 2.4GHz Wireless Mouse User Manual Hardware Installation

Download:
Mirror Download [FCC.gov]
Document ID	2052434
Application ID	707iCTQDo1TkF2vBDb61FA==
Document Description	FSUGMZKT User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.87kB (223357 bits)
Date Submitted	2013-08-23 00:00:00
Date Available	2013-08-23 00:00:00
Creation Date	2013-08-20 16:17:51
Producing Software	Microsoft® Office Word 2007
Document Lastmod	2013-08-20 16:18:26
Document Title	Hardware Installation
Document Creator	Microsoft® Office Word 2007
Document Author:	11003218

English
Hardware Installation
1. You can connect the receiver to a USB port of a PC.
2. Install two AA batteries in the mouse as instructed.
3. Make sure that you have switched on the power switch underneath the mouse.
Button definitions in Windows 8:
1. Switch between Apps: Pressing the side button 1
allows you to switch between all open
applications.
2. Charms panel: Press side button 2 to open up the Charms panel.
3. Left Button: Provides traditional mouse functions like click, double click and drag.
4. Magic-Roller: Spin the “Magic-Roller” to surf the Internet, scroll within apps or any
Windows documents.
5. Right Button: Provides traditional mouse click functions.
6. When both buttons 1 and 2 are pressed at the same time, it will allow you to toggle
between Windows 8 Metro interface and the last app used.
-1-
English
Note:
When buttons 3, 4 and 5 are pressed at the same time, it
will allow you to change between Windows 8 and
traditional mouse function mode.
Button definitions in Windows 7/XP/Vista:
1. Previous Page: Go to last page of Internet Explorer
2. Next Page: Go to next page of Internet Explorer
3. Left Button: Provides traditional mouse functions like
click, double click and drag.
4. Magic-Roller: Press the “Magic-Roller” to surf the
Internet and Windows documents.
5. Right Button: Provides traditional mouse click functions.
6. DPI adjustment: The LED indicates will flash after you
press this button. Default is 1200 dpi, 800 dpi (1 flash),
1200 dpi (2 flashes), and 1600 dpi (3 flashes).
7. Flying Scroll: Press and hold to move vertically or
horizontally for 4-way scrolling. Please download 4-way
scrolling driver from Genius website at
www.geniusnet.com.
Note: Download the programmable driver from Genius website at www.geniusnet.com
Warning: (Troubleshooting)
1. Do not use the wireless optical/laser mouse on a desk which is made of glass or mirror.
2. The connection of the wireless device is factory preset, so when you plug the USB
receiver into any USB port, the connection between the micro receiver and the mouse will
be established automatically.
3. In case your PC did not install the hardware successfully, remove the micro receiver from
the USB port and go Human Interface Devices under Device Manager to remove the
mouse then plug in the micro receiver to a USB port again.
4. If you feel the mouse does not move smooth as usual, it is possible the batteries have lost
their charge so you need to replace them. Remember to put the batteries in the correct
direction.
-2-
English
Note: Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment. (15.21)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.(15.19(a)(3))
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2013:08:20 16:17:51+08:00
Creator Tool                    : Microsoft® Office Word 2007
Modify Date                     : 2013:08:20 16:18:26+08:00
Metadata Date                   : 2013:08:20 16:18:26+08:00
Format                          : application/pdf
Creator                         : 11003218
Title                           : Hardware Installation
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:e5f94dd3-4309-4f34-b0fe-c39df664f406
Instance ID                     : uuid:b1a260d3-02a1-4e0a-a75f-936c1b75a5e9
Has XFA                         : No
Page Count                      : 3
Language                        : zh-TW
Author                          : 11003218

EXIF Metadata provided by EXIF.tools