KYE SYSTEMS KK002 2.4GHz Wireless Keyboard User Manual K7910 manual ENG 20100803 rev

Download:
Mirror Download [FCC.gov]
Document ID	1330280
Application ID	nWuLT/HEmbCECQP+gyQiRg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.72kB (384018 bits)
Date Submitted	2010-08-20 00:00:00
Date Available	2010-08-20 00:00:00
Creation Date	2010-08-18 22:56:10
Producing Software	GPL Ghostscript 8.61
Document Lastmod	2010-08-19 15:18:29
Document Title	K7910 manual-ENG-20100803_rev
Document Creator	PDFCreator Version 0.9.5
Document Author:	Teresa

KYE
2.4GHz Wireless Keyboard / K7910
ENGLISH
Hardware Installation
1.
Install two AAA batteries into the RF keyboard, and close the
battery cover.
2.
Plug in your USB receiver to a USB port of your PC.
ID Channel Setting and connection:
Follow these steps:
1. Plug in your USB receiver to a USB port of your PC and wait
about 5-10 seconds.
2. The connection will be executed and the kit will be ready for
use.
KYE
2.4GHz Wireless Keyboard / K7910
ENGLISH
Ch # Frequency Ch # Frequency Ch # Frequency Ch # Frequency
2.402
21
2.422
41
2.442
61
2.462
2.403 -
22
2.423
42
2.443
62
2.463
2.404
23
2.424
43
2.444
63
2.464
2.405
24
2.425
44
2.445
64
2.465
2.406
25
2.426
45
2.446
65
2.466
2.407
26
2.427
46
2.447
66
2.467
2.408
27
2.428
47
2.448
67
2.468
2.409
28
2.429
48
2.449
68
2.469
2.410
29
2.430
49
2.450
69
2.470
10
2.411
30
2.431
50
2.451
70
2.471
11
2.412
31
2.432
51
2.452
71
2.472
12
2.413
32
2.433
52
2.453
72
2.473
13
2.414
33
2.434
53
2.454
73
2.474
14
2.415
34
2.435
54
2.455
74
2.475
15
2.416
35
2.436
55
2.456
75
2.476
16
2.417
36
2.437
56
2.457
76
2.477
17
2.418
37
2.438
57
2.458
77
2.478
18
2.419
38
2.439
58
2.459
78
2.479
19
2.420
39
2.440
59
2.460
79
2.480
20
2.421
40
2.441
60
2.461
KYE
2.4GHz Wireless Keyboard / K7910
ENGLISH
Replace Batteries
If the keyboard does not work properly, then the batteries have lost
their charge, so you need to replace them.
Warning: do not mix or use different types of batteries at the same
time.
“Warning (Trouble shooting)
1.
2.
In case the wireless device was not connected when you set the
ID channel setting, check if you have installed the batteries with
the positive (+) and negative (-) polarity in the correct position,
then repeat the ID channel setting again.
For optimum performance, please make sure that the distance
between the wireless device and the micro dongle receiver does
not exceed 10M.
Keyboard hot key definition
Play & Pause
Volume down
Volume up
KYE
2.4GHz Wireless Keyboard / K7910
ENGLISH
Notes on Battery Usage
When you use the battery, carefully read and strictly observe the
Safety Instructions and the notes described below:

 Different battery types and surrounding temperatures may affect
the battery performance.

 Avoid using batteries in extremely cold environments as low
temperatures can shorten the battery life and reduce wireless
device performance.

 If you are using a new rechargeable battery or rechargeable
battery that has not been used for an extended period of time
(batteries that pass the expiry date are exceptions) it might affect
the period of time you can use this device. Therefore, to
maximize their performance and lifetime, we recommend that
you fully charge the batteries and discharge them for at least one
complete cycle before use.

 The battery may feel warm when using the wireless device for an
extended period of time or using the flash continuously. This is
normal and not a malfunction.

 The wireless device may feel warm when being used
continuously or for an extended period of time. This is normal
and not a malfunction.

 If you will not be using the batteries for an extended period of
time, remove them from the wireless device to prevent leakage or
corrosion.

 Always keep the terminals in a clean state.

 Never use manganese batteries.

 Risk of explosion if battery is replaced by an incorrect type.

 Dispose of used batteries according to the instructions.
KYE
2.4GHz Wireless Keyboard / K7910
ENGLISH
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate
this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. End users must follow the specific operating
instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
About                           : 503085ba-ad34-11df-0000-eeb2593743d1
Producer                        : GPL Ghostscript 8.61
Keywords                        : 
Modify Date                     : 2010:08:19 15:18:29+08:00
Create Date                     : 2010:08:18 22:56:10+08:00
Creator Tool                    : PDFCreator Version 0.9.5
Metadata Date                   : 2010:08:19 15:18:29+08:00
Document ID                     : 503085ba-ad34-11df-0000-eeb2593743d1
Instance ID                     : uuid:8d7d9cb2-4ae2-4032-aa3b-5a4fcf165e05
Format                          : application/pdf
Title                           : K7910 manual-ENG-20100803_rev
Creator                         : Teresa
Description                     : 
Page Count                      : 5
Subject                         : 
Author                          : Teresa

EXIF Metadata provided by EXIF.tools