KYE SYSTEMS KM009 Micro Dongle User Manual 410 1514 001A AMW43US 13Aug08

KYE Systems Corp Micro Dongle 410 1514 001A AMW43US 13Aug08

User manual

Wireless Mousefor Mac®USER GUIDEAMW43US / 410-1514-001A©2008 Manufactured or imported by Targus Group International, Inc. (for U.S. sales: 1211 North Miller Street, Anaheim, CA 92806 USA, for Australia sales: Targus Australia Pty. Ltd., 117-119 Bowden Street, Meadowbank, NSW 2114 Australia). All rights reserved. Targus is either a registered trademark or trademark of Targus Group International, Inc. in the United States and/or other countries.  Features and specifications are subject to change without notice. Mac, the Mac logo, Mac OS, Safari and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. All trademarks and registered trademarks are the property of their respective owners. This product and its various features are protected under patents US7298362, TWM249131, CNZL03275852.9, JP3132101, DE202007005619.2, CNZL200620131443.5, JP3232194, DE202007004256.6, DE202007006210.9. Other United States and foreign patents pending.www.targus.com/us/forMacN2953ONE YEAR  LIMITED WARRANTY
Wireless Mouse1Wireless Mouse2Hardware• USB portOperating System• Mac OS® X 10.4 or laterTargus Wireless MouseIntroductionCongratulations on your purchase of the Targus Wireless Mouse. This wireless mouse uses 2.4GHz RF technology which provides a seamless connection up to 33 ft (10 m) away.System RequirementsInstalling the Batteries•Please use the two AA batteries that are included.•Remove the battery cover by sliding the release button on the bottom of the mouse.  Once the battery cover releases, simply lift it up from the back of the mouse.•Insert the batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery compartment.
Wireless Mouse3Wireless Mouse4•Once the batteries are installed.  Close the battery compartment by first re-inserting the front of the cover and then pressing down the back until it locks into position.•Turn on the mouse by sliding the on/off switch on the bottom to the “on” position.Low Battery Power IndicatorNOTE: WHEN THE BATTERY POWER IS LOW, THE TOUCH SCROLL WILL FLASH RED. PLEASE REPLACE THE BATTERIES.When 60 minutes of power remains, a red indicator light will glow for 8 seconds.When only 30 minutes of power remains, the red indicator light will blink continuously.Using the MouseTouch Scroll(4-way scrolling)Left mouse buttonRight mouse buttonProgrammable buttons (requires CD installation)
Wireless Mouse5Wireless Mouse6•Remove the mini USB receiver from the bottom of the mouse cover.•Plug the USB receiver into an available USB port on your computer• You are ready to use the mouse.Establishing the ConnectionInstalling the Device Controller SoftwareInstalling the software enables configuration of the programmable buttons.  The software is located on the included CD.After inserting the CD, double click the setup icon to launch the installation software.Using the Touch Scroll• Slide your finger over the Touch Scroll sensing area to use the 4-way scrolling function. • Quickly slide your finger (either up or down) over the Touch Scroll to activate the quick scrolling function. • Press any button to disable the quick scrolling function.
Wireless Mouse7Wireless Mouse8Programming the ButtonsClick to highlight the image of the device and then press “Setup Device” to launch the configuration software.Click on the Targus logo to launch the device application.A Targus icon will appear in the System Preferences window.After the software is successfully installed, restart your computer to finish installing the software.Follow the on-screen instructions to complete the installation.Wireless MouseWireless Mouse
Wireless Mouse9Wireless Mouse10TroubleshootingThe mouse is not working.• Make sure the batteries are installed correctly.  The positive (+) and   negative (-) ends of each battery must match the positive (+) and negative (-)   connections in the battery compartment.• Make sure the batteries are charged. Replace if necessary.• Verify that the computer’s USB port is functioning.• Try plugging the USB receiver into another USB port.Each button can be programmed to any of the following types of functions:Close the application window to apply the changes.Click the arrows on the right-side of the drop down lists to configure each button.Default Action  Set the buttons to a specific function.  Run AppleScript Set the buttons to load an AppleScript Launch Application Set the buttons to launch specific application installed in the computer.Perform key strokes Set the button to recall key strokes.Industry Canada - Class BThis digital apparatus does not exceed the Class B limits for radio noise emissionsfrom digital apparatus as set out in the interference-causing equipment standardentitled “Digital Apparatus,” ICES-003 of Industry Canada.Cet appareil numérique respecte les limites de bruits radioélectriques applicablesaux appareils numériques de Classe B prescrites dans la norme sur le materialbrouilleur: “Appareils Numériques,” NMB-003 édictée par l’Industrie.(1)•this device may not cause interference,and (2) this device must accept anyinterference, including interference that may cause undesired operation of the device."
Wireless Mouse11Wireless Mouse12FCC StatementTested to ComplyThis equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna;• Increase the separation between the equipment and receiver;• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected;• Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not authorized by the party responsible for compliance could void the user’s authority to operate this product.Declaration of ConformityHereby, Targus, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Technical SupportFor technical questions, please visit:US    Internet: www.targus.com/support.aspAustralia Internet: www.targus.com/au  Email: infoaust@targus.com  Telephone: 1800-641-645New Zealand Telephone: 0800-633-222Product RegistrationTargus recommends that you register your Targus accessory shortly after purchasing it. To register your Targus accessory, go to:http://www.targus.com/registration.aspYou will need to provide your full name, email address, country of residence and product information.WarrantyTargus warrants this product to be free from defects in materials and workmanship for one year.  If your Targus accessory is found to be defective within that time, we will promptly repair or replace it.  This warranty does not cover accidental damage, wear and tear, or consequential or incidental loss.  Under no conditions is Targus liable for loss of, or damage to, a computer or other device(s); nor loss of, or damage to, programs, records, or data; nor any consequential or incidental damages, even if Targus has been informed of their possibility.  This warranty does not affect your statutory rights.Regulatory ComplianceThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Navigation menu