KYE SYSTEMS KM017 Mouse User Manual D7AAC7FA2E636472
KYE Systems Corp Mouse D7AAC7FA2E636472
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1561748 |
| Application ID | 2+16YFJuKfQmw0ZxEnOsVQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 122.86kB (1535698 bits) |
| Date Submitted | 2011-10-18 00:00:00 |
| Date Available | 2011-10-19 00:00:00 |
| Creation Date | 2011-09-28 15:17:41 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2011-09-28 15:18:26 |
| Document Title | |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | cxl |
rim pnaomdiuror tow pot‘rci indicator Notes on Battery Usage When you u. the battery , carefully read and strictly observe the Safety Instructions and the notes described below: I Different battery types and surrounding temperatures may affect the battery performance. I Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and reduce wireless device performance I lfyou are using a new rechargeable battery or rechargeable battery that has not been used for an extended period of time (batteries that pass the expiry date are exceptions) it might affect the period of time you can use this device, Therefore, to maximize their performance and lifetime, we recommend that you fully charge the batteries and discharge them for at least one complete cyele before use. I The battery may feel warm when using the wireless device for an extended period of time. This is normal and not a malfunction. l The wireless device may feel warm when being used continuously or for an extended period oftime. This is normal and not a malfunction I Ifyou will not be using the batteries for an extended period of timc,rcmeve them from the wireless device to prevent leakage or corrosion. I Always keep the terminals in a clean state. Risk of explosion if battery is replaced by an incorrect type. I Dispose ofused batteries according to the instructions. A79M s A79Ks A79D, KM001W Manual Package content I Wireless RF keyboard I Wireless RF mouse I USB mini receiver I 1x AAA battery (keyboard), 2 x AAA battery (mouse) Hardware Installation 1. Install one AAAbattery into the keyboard and two AAA batteries into the mouse. 2, Plug in your USB receiver to a USB port or your PC, 1D Channel Setting and connection: After you install the receiver: Wait about 5-10 seconds and the connection will be executed and the kit Will beready for use, Replace Batteries If the mouse or keyboard does not work properly, then the batter - have lost their charge. so you need to replace them. Wummg‘ do riot mzx or use diflcrertl biped tz/bal/erws at the same time. Keyboard hot key definition Hoi key . 7 7 _n_fi_ Ifl— Turn down the volume. cfl+ l‘urn up the volume. Mouse Button Assign 1. Left Button: Provides traditional mouse functions like click, double click and drag. 2. Magie-Roller: Scroll the button to surf the Internet and Windows documents. 3, Right Button: Provides traditional mouse click function DPI switch The mouse has four kinds ofDPI for you choice freely. The factory default is lOOOdpi. DPl value LED ilash WNW" too dpi One time 1000 dpi Twice W M M 1200 dpi rhiee times 1600 dpi Four times ON/ OFF switch On the bottom ofthe rnouse. there is a ON/OFF swtieh. When you take plane or stop to use it for a long time, please switch it to OFF, Low power indicator The mouse or keyboard has low power indicator, when the power is nearly used up, the LFD will flash. when you need to change new batteries. Afcr the power is completely uscd out, the LED will bc off, so please change the battery in time. Federal Communications Commission (FCC) Notice All other devices shall bear the following statement in a conspicuous location or device: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (i ) this device may not cause harmful interference. and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply With the limits for a Class B digital deVice, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference Will not occur in a particular installation. Ifthis equipment does cause harmful interference to radio ortelevision reception. which can be determined by turning the equipment offand on. the user is encouraged to try to correct the interference by one or more of the following measures fReorient or relocate the receiving antenna. fincrease the separation between the equipment and receiver. 7C0nnect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected. fCorisultthe dealer or an experienced radio/TV technician for help Caution. “Changes or modifications not expressly approved by the part responsible for compliance could void the user‘s authority to operate the equipment "
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2011:09:28 15:18:26+08:00 Create Date : 2011:09:28 15:17:41+08:00 Metadata Date : 2011:09:28 15:18:26+08:00 Format : application/pdf Title :EXIF Metadata provided by EXIF.toolsCreator : cxl Document ID : uuid:30700134-5e01-4c29-8ceb-ea8eec17df13 Instance ID : uuid:08202225-761f-4889-82e4-da79f6aff11a Page Count : 1 Author : cxl