KYOCERA Document Solutions B5J0452 RFID Reader/Writer User Manual B5J0151 Setup manual

KYOCERA Document Solutions Inc. RFID Reader/Writer B5J0151 Setup manual

Contents

  • 1. Manual
  • 2. corrected installation manual per FCC correspondence 35701

corrected installation manual per FCC correspondence 35701

B5J-0452 Setup manual B5J-0452 is attached in printer according to the following photo 1 and 2. Overview of printer cover photo 1 B5J-0452 photo 2
RFID Tag is attached in toner cartridge according to the following photo 3. RFID Tag photo 3
FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTICE This device complies with Part 15 of FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. Since B5J-0452 owns its FCC ID and IC Number, we shall affix an exterior label on the outside of a product if the FCC ID and IC Number are not visible. The exterior label shall use wording such as either “Contains Transmitter Module FCC ID: E52B5J0452 / IC: 1059B-B5J0452” or “ Contains FCC ID: E52B5J0452 / IC: 1059B-B5J0452”. There is not an official manual to this module (B5J-0452) but it is necessary for it to be included an explanatory note in a user manual of a product using this module. This module is professionally installed at the factory and only in the specific printer series listed in the users manual of the printer. Compliance of the end product is therefore ensured.

Navigation menu