KYOCERA Document Solutions LBWA1ZZ1CA Communication Module User Manual LBWA1ZZ1CA Installation Manual

KYOCERA Document Solutions Inc. Communication Module LBWA1ZZ1CA Installation Manual

(Short-Term Confidential) User Manual_FCC

1
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 22 January 2015
LBWA1ZZ1CA Installation Manual
FCC ID of this product is as follows.
FCC ID:E52LBWA1ZZ1CA
For OEM integration only device cannot be sold to general public.
Therefore we will ask OEM to include the following statements required
by FCC on the product and in the Installation manual Notice.
Contents
1.Connector
2.Supply Voltage
3.Power Levels
4.Notice
Confidential
6
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 22 January 2015
4. Notice
Contains Transmitter Module FCC ID:E52LBWA1ZZ1CA
Contains FCC ID:E52LBWA1ZZ1CA
or
Please describe the following warning on the final product which contains this module.
Confidential
When the product is small, as for these words mentioned above, the posting to a manual is possible.
7
Copyright © Murata Manufacturing Co., Ltd. All rights reserved. 22 January 2015
4. Notice
Confidential
Please describe the following warning to the manual.
FCC CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Note)
Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm.
Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm.
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the radiator at least 20cm or more away from person’s body.
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non
contrôlé et respecte les règles les radioélectriques (RF) de la FCC lignes directrices d'exposition et d’exposition
aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement doit être installé et utilisé en gardant une
distance de 20 cm ou plus entre le dispositif rayonnant et le corps
When installing it in a mobile equipment. Please describe the following warning to the manual.
When installing it in a portable equipment.
It is necessary to take a SAR test with your set mounting this module.
Class II permissive change application is necessary using the SAR report.

Navigation menu