KYUNG JIN ELECTRON W-2400 Wireless Headset User Manual manual eng a
KYUNG JIN ELECTRON CO.,LTD Wireless Headset manual eng a
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1167882 |
| Application ID | 9kKqfj4THma2yUWry4d/3g== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 118.24kB (1477973 bits) |
| Date Submitted | 2009-09-10 00:00:00 |
| Date Available | 2009-09-10 00:00:00 |
| Creation Date | 2017-11-16 23:25:55 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-16 23:25:55 |
| Document Title | manual_eng-a.cdr |
| Document Creator | CorelDRAW |
| Document Author: | hjx |
wireless wireless W-2400KJ TM Headset WIRELESS HEADSET FOR TELEPHONE TM Headset W-2400 (V/R) USER’S MANUAL Wireless Telephone Headset 2.4Ghz WIDE BAND CORDLESS HEADSET 1.Features 2.4Ghz wireless headset ambient temperature:-10℃~+40℃ relative humidity:10%~95% atmospheric pressure:86~106Kpa applicable all telephone wireless connection distance:100M(max) calling time: 5h standby time:20h Constitution Features Functions AFH MUTE Installation Adjustment and Application Operation Precautions r Lif Powe Troubleshooting Guide Warranty wireless telephone (main part) LIFT wireless headset Adaptor connecting line LIFT Sponge cradle Lift connecting line manual wireless TM Headset W-2400KJ 2.Functions A. Receiver B C wireless TM Headset W-2400KJ B.Wireless Headset AFH MUTE 9V 300MA A. Power Indicator Power Indicator (red) of Base Station will be ON when the Main Station is plugged into the electrical outlet. B. Call&Receive/Charge Indicator The indicator is ON when either the main station is being charged or the phone is being used. C. Volume adjustment of the microphone Adjust the volume of the microphone while the phone is being used. D. Select the telephone power line Select the telephone power line 1~ 4 range to match the different power. E. Polarity switch of MIC F. Paging Button paging button (headset signal) G. Adaptor H. Headset connecting line (mic connecting line) jack I. TEL connecting line jack J. LIFT jack K .ON/OFF Battery Switch : the Headset during a call to make make sure the power is ON other person not to hear your when it is being used. voice. To mute or un-mute during L .Battery M .MIC :(Microphone) N .Call / Receive : Press the Call/receive button when you either call or receive the phone. O .MUTE: The MUTE button on a call, press the MUTE button. P .indicator light Q .AFH: Select the optimal channel by changing the frequency. R .VOL: Volume adjustment for receiving S .POWR OFF wireless TM Headset W-2400KJ C.LIFT wireless TM Headset W-2400KJ 3.Installation r Lif Powe er O Powift On T. RING SENSOR: It can be varied due to using different type of phones (however the most of the phones will be same) U . LIFT INPUT: Connect to the LIFT with connecting line. V . LIFT CTRL: The switch has 3 different positions to adjust the lifting level of the LIFT. W .RING LED: The light will be on when the LIFT is being used. X .RING LED: The light will be on when the Y .RING LED: The light will be on when the wireless TM Headset W-2400KJ wireless TM Headset W-2400KJ 4.Adjustment and Application 1. Plug Connect the DC9V adaptor on the backside of the main station. 9V 300MA 2. Unplug the handset (receiver) connection cable from the telephone and plug it in to the handset connecting jack at the bottom of W-2400 Main Station.(no need to connect Headset Charging 1. Place the headset on top of the main station to charge. Then the green light will be ON. Turn on the ON/OFF switch on the battery section to charge the headset. (It takes more than 6 hours to be fully charged when it is being charged the first time.) 2. Make sure that the headset is properly placed on the main station. When it is properly done, the green light will be ON. with the phone without receiver) Headset Application 3. Connect with the provided connecting line to the unplugged jack of the handset(receiver) and the other end to TEL jack at the bottom of the main station. 4. Connect the LIFT with connecting line to the Lift inpu t at the bottom of the main station and the LIFT. jack jack of the LIFT 5. Use the Headset after it is fully charged. (The Battery ON/OFF switch must be ON when the headset is used). 1. Power switch should be ON after the headset has been separated from the main station when it is being used. (To save the battery, turn OFF the battery switch when it is not being used for a long time) 2. Call/Receiving can be made by pressing the Call/Receiving switch. The LED light will be ON. Check the connection lines if either the LED light is not ON or no signal tone. 3. MUTE button on the Headset may be used during a call to make other person not to hear your voice. To mute or unmute during a call, press the MUTE button. 4. Press the AFH button of the Adaptive Frequency Hopping System when several headsets are being used at the same location. wireless TM Headset W-2400KJ wireless TM Headset W-2400KJ 5.Operation Main Station Receiving a Call MIC IC 1. Press the 30 0M switch when the phone ringing. 2. If the LIFT is connected, it will be operating automatically. If not, it can be answered by picking up the handset (receiver) of the phone or pressing the headset button. 1. Adjust A button to get the best sound. 2. Change the B (1-4) switch on the headset when Make a call there is either no or abnormal signal tone. 3. Use C button when the signal tone cannot be 1. Press the switch then dial the number. adjusted with A button. 2. Signal tone can be heard when the LIFT is operating. 4. Use D button when you want to page the person using the headset. If the LIFT is not connected, the handset (receiver) should be picked up to hear the signal tone. wireless TM Headset W-2400KJ 6.Precaution 1. Keep the wireless headset dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that it will corrode electronic circuits. If your device does get wet, allow it to dry completely. 2. Do not use or store the wireless headset in dusty, dirty areas. Its moving parts and electronic components can be damaged. 3. Do not drop, knock, over powering when pressing buttons or shake the wireless headset. Rough handling can break internal circuit boards and fine mechanics. wireless TM Headset W-2400KJ 7.Troubleshooting Guide Problem Lift is not functioning properly and indicator light is keeping flashing Cause Solution The jack of Automatic Power supply is Lift Signal Cable to Wmalfunctioning due 2400 Main Station to the connection is should be removed not properly made and reconnected Place the Headset on the Main Station then operate while it is on the charge terminator 4. Do not attempt to open the wireless headset. If any part such as battery, adapter, headset and main station is not working properly, take it to the nearest authorized service facility for service. Frequencies of Headset and All set up of the Telephone is not wireless headset matched is done properly but still not Battery is dead or functioning its switch is off 5. Battery life time is around 400 charging times. Make sure to make the replacement with properly certified battery with the same specifications. Cannot hear the Sound control of other person’s the Headset is not voice properly set up Other person cannot hear any sound MIC volume control Adjust the MIC of the headset has volume control on the not set up properly main station 6. If the wireless headset will not be used for a long time, the switch for the battery should be OFF. 7. If the Headset will not be used for a long time, it is recommended to charge fully then store in the original package and store it properly. Put the switch ON or recharge the battery Adjust the sound control on the Headset wireless TM Headset W-2400KJ 8.Warranty Service 1. When the product is not working properly, do not wireless TM Headset attempt to repair it yourself and take it to the nearby certified service center or retail store where the product has purchased. wireless Warranty Service Products cord and Number: Company name: Contact name: Email address: Address: Purchase date: Customer should fill out 1-5 and Retail store should fill out 6. This wireless headset does not guarantee the security during a call and may have some interference while in use. FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 2.4Ghz WIDE BAND CORDLESS HEADSET -- Consult the dealer or an experienced radio/TV technician for help. W-2400 KJ MAIN OFFICE / KYUNG JIN ELECTRON CO., LTD. H.K.OFFICE / KJ COMMUNICATION(H.K)CO., LTD. FACTORY / N-SIA COMMUNICATION(S.Z)CO., LTD. www.kj-headset.co.kr
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Extract Author : hjx Create Date : D:20090710023408 Creation Date--Text : Modify Date : 0000:01:01 00:00:00 Mod Date--Text : Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Producer : Corel PDF Engine Version 3.0.0.667 Format : application/pdf Creator : hjx Title : manual_eng-a.cdr Creator Tool : CorelDRAW Metadata Date : 2009:09:03 13:53:28+08:00 Document ID : uuid:8b9f2235-8170-4c1d-b372-cdef72a190d4 Instance ID : uuid:54fdca58-d729-4f1c-8a10-2ee109f9522a Page Count : 7EXIF Metadata provided by EXIF.tools