KYUNGWOO SYSTECH PAS-K01-00 Intelligent Proximity Alert System User Manual PAS K01 UserManual STD eng Rev 1 06 180905

Download:
Mirror Download [FCC.gov]
Document ID	4027483
Application ID	0w+IVa0CCl3sFHwO/82Sjw==
Document Description	PAS-K01_UserManual_STD_eng_Rev.1.06_180905
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	278.16kB (3477002 bits)
Date Submitted	2018-10-05 00:00:00
Date Available	2018-10-11 00:00:00
Creation Date	2018-09-05 12:27:25
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2018-09-05 12:27:33
Document Title	PAS-K01_UserManual_STD_eng_Rev.1.06_180905
Document Creator	Adobe InDesign CC 2017 (Windows)

180905_Rev. 1.06
KIGIS IPAS User Manual
Wired Type [Standard]
Vehicle Tag(VT)ㆍPedestrian Tag(PT)
Intelligent
P rox i m ity
Alert
System
Contents
1. What is IPAS?
2. Caution / Warning for Safety
3. Components / Names of Parts
4. Specifications
5. Installation
6. Setting
8 ~ 10
· [IND] Danger / Caution Area Distance Setting
· [IND] Volume Control
· [IND] Setting Initialization
· [IND] How to Set the Distance
· [PT] Alarm type Setting
10
· [PT] Volume Control
10
7. How to use
11 ~ 12
· Indicator Instruction that a driver must know
11
· PT instruction that a pedestrian must know
11
· LED status display
12
8. Check list before reporting failure
13
9. Warranty
15
Thank you for purchasing KIGIS IPAS product from KYUNGWOO SYSTECH, Inc.
This product is a safety-assisting device to give warning signals by detecting the proximity of vehicles
and pedestrians at industrial working site. Any property or life damage casued by the breach of safety
regulation and users' carelessness will not be held responsibility. Before using this product, please
read this manual carefully.
·Model No : PAS-K01-10
·FCC ID : [VT]ZE8-PAS-K01-10 / [PT]ZE8- PAS-K01-00
·Manufacturer : KYUNGWOO SYSTECH, Inc. / KOREA
* This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
* CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
* NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
1. What is IPAS?
KIGIS IPAS is an intelligent proximity alert safety and assistant system that prevents collisions by
signaling dangers in 2 way communication to both drivers and pedestrians when pedestrians
approach to a vehicle or vehicles approach to other vehicles in industrial working site. It is easy
to install without causing any damages to the vehicle, and compared to other products, the
outstanding proximity detection is an advantage that KIGIS IPAS only offers.
"Watch Out."
"Danger!"
"Beep-Beep-"
"Whee Yooo"
Danger Area
Caution Area
※ IPAS is applicable to all industrial vehicles.(excavators, forklifts, loaders, tractors, etc.)
2. Caution/Warning for Safety
Caution!
※ Failure to observe the precautions in this manual may result in damage to the product or your property.
DC 12/24V
Use only DC 12/24V.
For vehicles with DC
36/48V, be sure to
connect SMPS module
to use DC 12/24V.
Otherwise, this may
cause trouble.
Do not place the
product near
flammable materials,
stoves, candles, or
fire. This may cause
fire and product
deformation.
Do not intentionally
immerse the product
in water or wash it in
running water. This
may cause trouble.
If the product smells,
smokes, or makes
abnormal noises, turn
off the power and
contact the customer
service center
immediately.
Caution!
※ Failure to follow the warnings in this manual may result in damage to the product or serious injury.
Do not touch the
connector or wiring
with wet hands.
This may cause
electric shock or fire.
Do not place heavy
objects on the
product or on wiring,
or shock. It may
cause electric shock
or fire.
If a connector or a
wiring gets wet, wipe
it with a dry towel.
Otherwise, it may
cause electric shock
or fire.
Do not disassemble or
modify this product.
This may cause
trouble, and AfterSale Service will not
be available.
Usage Precautions
The pedestrian
tag (PT) is a
rechargeable
product, so do
not replace the
battery. There
is a risk of
malfunction or
explosion.
Since the
pedestrian
tag(PT) is a
built-in battery
product, please
keep it in a cool
place away from
direct sunlight
when not in use.
Combine PT
and the holder
in the proper
way as shown in
illustration. If not,
a malfunction
may be caused by
an inflow of liquid
matters.
* CAUTION Risk of explosion if battery is replaced by anincorrent type. Dispose of used batteries according to the instructions.
※ Any accidents that result from not following the instructions in this manual are the user’s responsibility.
3. Components/Names of Parts
Components
Vehicle Tag(VT)
Indicator
Pedestrian Tag(PT)
Helmet Holder
High Speed Charging Cable(PT)
User Manual
Fuse
Cable Harness(6m)
Open Wire Adapter Cable
※ Tag may not be recharged
with general charging cable.
※ It is strongly recommended
that the tag should be installed
on epaulet or arm band due
to communication problem in
case of installation at waist or
in pocket.
Optional
Extension Cable
Optional
Cigar Jack Adapter
Optional
Clip Holder
※ The appearance of the product may be slightly different from the actual product received.
Names of Parts
LED Lamp
SET 1 Button
STOP Button
SET 2 Button
Menu Button
Power Button
LED Lamp
LED Lamp
Charging Port
Detach Lever
Vehicle Tag(VT)
Indicator
Pedestrian Tag(PT)
4. Specifications
Specifications
Vehicle Tag(VT)
Indicator
Pedestrian Tag(PT)
Product Image
Power
Electrical Feature
12/24V DC Input(9/32Vdc)
12/24V DC Input(9/32Vdc)
Current
300mA
500mA
Interface
CAN Bus 2.0
CAN Bus 2.0
·Normal operation
: Green LED flashing
·Approaching alarm
: Green/Red LED flashing
·Normal operation
: Green LED flashing
·Approaching alarm
: Green/Red LED flashing
+ Warning voice
·Normal operation
: Green LED flashing
·Approaching alarm
: alarm + vibration(3 options)
92dB / 0.1m
87dB / 0.1m
LED Status
and Alarm
method
Sound Level
/ @Distance
Battery
Lithium polymer 950mA
Operating
Voltage
3.7V
Charge
Interface
Micro USB Type-B(5V/1A)
Charge Time -
Approximately 1 hour 30
minutes
Mechanical
Feature
UWB
Feature
Opereation
Specification
Charge
Current
0.85mA
Operating
Time
6 days(8 hours/day)
177.8 × 84.1 × 86mm
93 × 130.5 × 47.5mm
40 × 72 × 19.5mm
444g
207g
58.5g
Mounting
Method
Magnet pad
attachment method
Fixed with screw
(or adhesive tape)
Clip, Necklace chain
Frequency
3993.6MHz
3993.6MHz
Bandwidth
499.2MHz
499.2MHz
Detdction
Cycle
0.5sec
0.5sec
Operating
-30 ~ 85°C
Temperature
-30 ~ 85°C
-20 ~ 55°C
Storage
-40 ~ 85°C
Temperature
-40 ~ 85°C
-20 ~ 55°C
IP65
Basic waterproof
Size
Weight
Waterproof
IP65
※ Some features may change without prior notice to improve the performance of the product.
5. Installation
Caution!
It is highly recommended to install IPAS with the power off.
Turn on the power after connecting all products.
Vehicle Tag(VT)
Cable Harness(6m)
or
Open Wire Adapter Cable
5m
or
3m
Indicator
Cigar Jack Adapter
* Normal operation : Green Flash ON after turning on the power.
* Caution! Wind up cable terminals to properly
connect them. Disregarding this caution, it may
cause a malfunction caused by liquid matters.
Setting
Tips
It is more desirable to install VT in a 360˚open space for example on top of
cabin, rather than a space insde cabin. This product, as a wireless frequency(RF)
device, is better communicative in operation in a open space.
KIGIS IPAS is designed with the customer in mind for easy installation without the help of an installer.
The powerful magnet can be attached easily on VT floor without damaging the vehicle and it is also
convenient to detach with detach lever.
It can be easily installed by using cable ties in case of no magnet on vehicle.
Magnetic Pad : Easy to install
Detach lever : Easy to detach from
vehicle by pulling the lever as shown
Fastening Tie Hole
Pedestrian Tag Helmet Clip
6. Setting - Indicator
Danger / Caution Area Distance Setting
※ In a condition of normal operation
① Press and hold SET
1 and SET 2 buttons
simultaneously for 2
seconds or more.
② Set the desired Danger
Area distance by operating
the SET 1 and SET 2
buttons. (Refer to "How
to set the distance" on the
following page)
③ Press STOP to complete
the Danger Area setting.
④ When the green LED is
on, set the distance to the
Caution Area.
⑤ Set the desired Caution
Area distance by operating
the SET 1 and SET 2
buttons. (Refer to "How to
set the distance" on the
following page)
⑥ Press STOP to complete
the Caution Area setting.
Volume Control
※ In a condition of normal operation
SET 1 Button : - Volume
SET 2 Button : + Volume
Setting Initialization
※ In case of malfunction
① Press and hold the STOP button for more than 2 seconds.
② When the red LED is flashing sequentially, press and hold the STOP button again for more
than 2 seconds. The LED will turn off and the setting will be initialized. Reboot will take
about 5 seconds.(Do not turn off the vehicle until the green LED flashes.)
※ Default values after initialization : 4m for Danger Area / 8m for Caution Area
6. Setting - Indicator
How to Set the Distance
Distance setting can be set to even distance [2 / 4 / 6 / 8 / 10m] or
odd distance [1 / 3 / 5 / 7 / 9m]. The default setting is even distance.
SET 1 button : Distance -2 m
STOP button : OK
SET 2 button : Distance + 2m
2m space per LED lamp [
ON
OFF
: 2m or 1m
: 4m or 3m
: 6m or 5m
: 8m or 7m
: 10m or 9m
* Odd distance [1 / 3 / 5 / 7 / 9m] change : Press and hold SET 1 button + STOP
button at the same time.
< Example > Setting Danger Area 3m / Caution Area 9m
① Set an even distance 1m longer than the desired Danger /Caution Area as shown below.
(Set 3m ⇒ 4m / 9m ⇒ 10m)
Danger Area (Red LED)
: 4m
Caution Area (Green LED)
: 10m
② Press & hold SET 1 button + STOP button at the same time, It is set to be 1m Shorter
and it changes into 3m distance for Danger Area / 9m distance for Caution Area.
※ If you want to change from odd distance to even distance again, press and hold Set 2 & STOP.
Setting
Tips
As IPAS releases warning signals by detecting the proxmity on 0.5 second cycles,
proximity distance must be set considering vehicle speed.
6. Setting - Pedestrian Tags
Alarm type Setting
① Press and hold the
power button to
turn on the power.
(Charging is required
if the red LED is on.)
Press
Power button
1 time
Sound
Press
Power button
1 more time
Vibration
④ Press and hold the
menu button to
complete the setup.
Press
Power button
1 more time
Sound
Vibration
(Sound +
Vibration)
③P
 ress the power
button to set the
desired alarm type.
(Please refer to the
alarm system below.)
※ Rotation
Alarm
Default
Status
②Press and hold the
menu button.
(A short vibration will
occur.)
Press Power button 1 more time
Volume Control
① Press and hold the
power button to turn
on the power.
(Charging is required if
the red LED is on.)
Stage 3
Press
Menu button
1 more time
Stage 2
④ Press and hold the
menu button to
complete the setup.
Press
Menu button
1 more time
(Stage 3)
Press
Menu button
1 time
③ Press the menu button
to set the desired
volume level.
(See volume steps
below.)
※ Rotation
Volume Stage
10
Default
Status
② Press and hold the
menu button.
(A short vibration will
occur.)
Press Menu button 1 more time
Stage 1
7. How to use
Indicator Instruction that a driver must know
Situation
LED Lamp Status
When a pedestrian(PT) trespass
on the Caution Area
When a pedestrian(PT) trespass
on the Danger Area
Alarm
Mute Alarm
Repeating
"Watch Out"
Red / Green
Light flashes
gradually
Repeating
"Danger"
Press STOP Button 1 Time
Even though alarm ismuted (double
clikc), in case that pedestrian escapes
the set Danger / Caution Area and reenters them, the alarm will go off again.
* When pedestrian enters and escapes out of Danger/Caution Area, for the safety of
pedestrians, the alarm will go off from the point 1m further away that was set originally.
(Example : If the Danger Area / Caution Area is set at 2m / 4m, the warning sound of PT will
go off until it escapes 3m of Danger Area and 5m of Caution Area from VT)
※ Volume Control : Refer to 8P
How to use "PT" that pedestrians must know
Situation
Alarm
LED Lamp Status
Alarm Pause
① "Beep-Beep-" sound
② Vibration
(short interval)
③ Both
When a pedestrian(PT)
trespass
on the Caution Area
Press menu or
power button
one time.
※ Depends on menu setting
Green Flash
When a pedestrian(PT)
trespass
on the Danger Area
① "Whee yooo whee
yooo"(siren)
② Vibration
(long interval)
③ Both
Red Flash
Even though alarm
Alarm will occur ismuted (double click),
in case that pedestrian
in 10 seconds
escapes the set Danger
automatically
/ Caution Area and reafter pause.
enters them, the alarm
will go off again.
※ Depends on menu setting
When the battery is low
(Less than about
4 hours of use)
Mute Alarm
Press menu or power
button twice quickly.
("Beep" alarm will
occur.)
"Beebeep Beebeep"
5 times every 10
minutes.
* When pedestrian enters and escapes out of Danger/Caution Area, for the safety of pedestrians,
the alarm will go off from the point 1m further away that was set originally.
(Example : If the Danger Area / Caution Area is set at 2m / 4m, the warning sound of PT will go
off until it escapes 3m of Danger Area and 5m of Caution Area from VT)
※ Alarm type setting / Volume Control : Refer to 10P
Caution!
Right exemple
X Wrong exemple
Charging Port
Charging Port
A malfunction
may be caused
by combining
products
backwards.
11
7. How to use - LED status display
LED Status
Vehicle Tag(VT)
Indicator
Pedestrian Tag(PT)
●
● ○ ○ ○ ○
●
Green Flash
Green Flash
Green Flash
○
○ ○ ○ ○ ○
●
LED Off
LED Off
After Red light blinks
once, it turns off
●
●
●
Green Flash
Green Flash
Green Flash
●
Red Flash
●
Red On
●
Green On
●+●
●+●
●
Green + Red
flashing
Green + Red
flashing
Green Flash
●+●
●+●
●
Green + Red
flashing
Green + Red
flashing
Green Flash
Power ON
Power OFF
Normal
Low Voltage
Battery
Battery Charging
Fully Charged
Entering
Caution Area
Entering
Danger Area
12
8. Check list before reporting failure
Question
Reason
Solution
You can access the menu after turning on
the power.
If you press and hold the power button for
2 seconds, the green LED will blink. Press
and hold the menu button for 2 seconds
afterward.
There is a red It is a signal indicating low voltage when
the remaining battery power is less than 4
LED on the PT. hours.
Please charge it. When it is 100% charged,
the green LED will turn on.
The volume of
VT sound is too Indicator's volume setting is low.
low.
The indicator can be adjusted up to 5 levels.
(How to adjust the indicator volume
: see 8P)
Can I mute the
alarm when I
Mute of alarm sound is possible.
drive a vehicle
with a PT?

* PT : Press twice quickly Menu or Power
button with short intervals.
* Indicator : Press STOP button once (When
PT owner deviates and reenters the Danger
/ Caution area, the alarm will go off again)
Access to
PT MENU is
unavailable.
Can I pause an

alarm to talk to It is possible to pause for 10 seconds. After * PT : 1 time quick press on Menu or Power
button. (PT alarm will go off after 10
a VT car driver 10 seconds, the alarm will occur again.
seconds automatically)
for a moment?
A. The alert sounds in shorter horizontal
distance depending on the installation
height of VT.
Previously
B. When getting inside and getting out of
set distance
the Danger / Caution Area, alarm will go
of Danger/
off 1m further from the set distance for
Caution area is
the safety reason.  In case of
not precise.
setting 2m for Danger Area and 4m for
In case of A and B, it is normal function but
when they are thought to be an issue, it is
recommended to initialize the indicator to
reset the distance for use from a scratch.
(See Indicator initialization and distance
setting 8P)
Caution Area, alarm will keep going off
until getting out of 3m (Danger Area)
and 5m (Caution Area).
If you have any questions, please feel free to contact us at www.kyungwoo.com.
13
ME MO
WARRANTY
Warranty Term 1 year from the purchase date
Product Name
Model Name
Place of Purchase
Date of Purchase
Name of Customer
Phone Number
* Service information
1. If a performance or functional failure occurs while proper using during the
warranty period, the repair service is free of charge.
2. When the repair service is required, please present the warranty card with all
information filled in.
3. The following cases will be charged for the repair regardless of warranty period.
· Failure due to careless use or improper repair or modification
· Failure due to non-compliance to the specifications stated in this manual
4. After the expiration of warranty period, a certain fee will be charged for the
repair service.
5. The warranty card cannot be reissued.
※ If failures occur when a person who is not in our service team tries to repair the
product and breaks down, or uses components from other companies, we will
not hold the responsibility for those failures.
※ Please contact the store where you purchased the product for the refund or
exchange of the product.
4F, Daeryung Post Tower 5, 68, Digital-ro 9-gil, Geumcheon-gu,
Seoul, 08512, Republic of Korea
T h in k Sm a rt ,
Work Safe
Distributor(or purchasing store)
Manufacturer
* Any inquiry about the purchased product is
contactable to distributor(or purchasing store) at below line.
KYUNGWOO SYSTECH, INC.
4F, Daeryung Post Tower 5, 68, Digital-ro 9-gil, Geumcheon-gu,
Seoul, 08512, Republic of Korea
Tel. +82-2-985-8085 Fax. +82-2-985-8087 E mail. info@kigistec.com
www.kyungwoo.com / www.kigistec.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Language                        : ko
XMP Toolkit                     : Adobe XMP Core 5.6-c138 79.159824, 2016/09/14-01:09:01
Create Date                     : 2018:09:05 12:27:25+09:00
Metadata Date                   : 2018:09:05 12:27:33+09:00
Modify Date                     : 2018:09:05 12:27:33+09:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Instance ID                     : uuid:8973a21d-a8af-4134-afa7-d74a243d1e46
Original Document ID            : xmp.did:90dd8036-001b-b84b-8e03-1fb625640012
Document ID                     : xmp.id:8e60e17d-03d3-cf40-9815-e8a133c738a8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:64f088c1-a57e-3145-bd1d-74b1725dc6d9
Derived From Document ID        : xmp.did:64f088c1-a57e-3145-bd1d-74b1725dc6d9
Derived From Original Document ID: xmp.did:90dd8036-001b-b84b-8e03-1fb625640012
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2018:09:05 12:27:25+09:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 16
Creator                         : Adobe InDesign CC 2017 (Windows)

EXIF Metadata provided by EXIF.tools