Kaba ILCO Solitaire 710 II Fact Sheet [M3567] M3567

User Manual: Kaba ILCO Solitaire 710-II Fact Sheet [M3567] 710-II/71M Electronic Multihousing Lock - Kaba Access & Data Systems

Open the PDF directly: View PDF .
Page Count: 2

Overview

Sleek and scalable for hotels big and small, the Solitaire

710-II door lock is a simple & reliable electronic locking

solution. It is uniquely designed to operate with the

keycard in a ‘swipe’ motion. Each lock maintains an audit

trail to create user accountability. The Solitaire 710-II

works with both the web-based ATLASTM and

the stand-alone portable Front Desk Unit (FDU).

Applications

• Suitable for small to very large scale hotels

• Access control for guest rooms,

common areas, and back-of-the-house

Security Features

• High security and tamperproof design

• 1” solid deadbolt (optional auto deadbolt)

• Emergency access: Emergency keycard,

mechanical key and electronic override

Low Maintenance

• Swipe reader slot is open so foreign objects

are easily removed

• Batteries last approximately 2 to 3 years

• Low battery indicator alerts staff

• Lock programming and audit are not erased

during battery replacement

• Wear resistant construction and nish

• Upgradeable lock rmware

Mechanical Features

Description Heavy duty electronic lockset with mortorized lock case and built-in magnetic stripe card reader

Handing Left or right factory handed

Lever

ADA compliant, outside lever free to rotate upward and downward in locked mode

Lever clearance (space from end of lever to door):

Long Lever: 1/16” [1.6mm]

Short Lever: 7/8” [21.88mm]

Knob Option

Spherical knob for inside and/or outside housing, non-ADA compliant, outside knob free to

rotate in locked mode. Distance from door to end of knob

Outside housing: 3.25” [82.55 mm]

Inside housing: 3.375” [85.725 mm]

Concealed Key

Override [optional]

- ILCO KIK Core (keyed-alike, master keyed, recodable)

- Best small IC adaptor

Deadbolt

1” [25 mm] (for AMM/ASM mortise) or 21.4 mm (for SSM mortise) solid metal,

projected by inside thumb turn and retracted with the latch by the interior handle. Emergency

override or specic staff keycards. Optional auto deadbolt available

Shipping Weight 11.45 lbs (5.2 kg)

Housing Construction Cast zinc alloy (outside housing, levers, thumb turn and inside housing)

Standard Finishes Satin chrome, satin brass, and ultra nish for ocean front applications SolitaireTM 710-II in chrome

SolitaireTM 710-II

ILCO

T.: 1.877.468.3555

www.kabalodging.com

www.ilcostore.com

M3567_7_12

Dimensions

Batteries

Alkaline 4 AA batteries for up to 100,000 openings or approximately 2 to 3 years (based on 10 openings per

day). Low battery indicator: alerts staff that batteries need to be changed soon

Warranty

Standard Factory Warranty Two years

Extended Warranty ILCO Service Plans (Platinum, Gold, Silver)

Lock Operation

Date/Time Stamp Real time; date and hours/minutes

Programming and

Audit Trail Downloading: Using Kaba M-Unit or FDU

Pre-registered Keycards Up to 10 days in advance

Keycard Expiry From 1 hour to 7 years, depending on type and setup

Passage Mode Set by authorized keycard

Lockout Mode Set by authorized keycard

Keycards Accepted Low or high (2700 oe) coercivity track 3 magnetic stripe cards that comply with ISO standard

dimensional specications

Feedback “Dual sensory” audible and visible indicators

Audit Memory Last 350 transactions

Privacy Override By guest keycard user selectable

Certifications and Testing

Accessibility Standard ADA compliant levers (Code of Federal Regulations 28 CFR Part 36 – 1994 “ADA Standards

for Accessible Design”)

BHMA/ANSI

Certied to be compliant with Grade One performance tests for “ANSI/BHMA A156.13-2005 Standard for

Mortise Locks and Latches,” and “ANSI/BHMA A156.25-2007 Standard for Electried Locking Devices.”

(only locks tested and approved by non-biased third-party test lab are allowed in the “BHMA Certied

Products Directory” found at www.buildershardware.com)

Fire Rating

Listed for pre-prepared manufactured doors and certied for retrotting on existing doors by

Underwriters Laboratories for use on re doors having up to a three-hour rating.

a. U.L. Certication: GWVW.R12071 “Accessories for Single-point Locks and Latches and Fire Exit

Hardware.” Evaluated in accordance with UL 10B and UL 10C.

b. U.L. Listing: GYQS.R11247 “Electrically Controlled Single-point Locks and Latches.” Evaluated in

accordance with UL 10B and UL 10C.

c. Also classied in accordance with Uniform Building Code Standard

7-2, “Fire Test of Door Assemblies” (1997)

Electronics FCC Part 15 Class A and CE directive 89/336/EEC compliant

Environmental Operating

Conditions

Indoor side: 32oF to 151oF (0oC to 66oC)

Outdoor side: -31oF to 151oF (-35oC to 66oC)

0% to 85% non-condensing humidity at 86oF (30oC)

Florida Building Code Approved in the exterior door category (exterior door components). Code of approval is FL13061

Mechanical Features continued

121⁄2”

(315 mm)

31⁄16”

(78 mm)

105⁄16”

(262 mm)

31⁄8”

(79 mm)

23⁄4”

(70 mm)

Standard Backset 2 ¾” [70mm] backset, 2 ⅜” [60mm] backset also available for cylindrical lock

Locking Options

ANSI lock case with 1 ½” or 1” lock front mortise. Optional automatic deadbolt

European lock case mortise [20 x 165 mm] with round (20 or 23 x 235 mm) or square

(20 x 235 mm) lock front mortise