Kaba Saflok Perimeter Common Brochure

User Manual: Kaba Saflok-Perimeter-Common-Brochure Saflok Multihousing Locks ation - Kaba Access & Data Systems

Open the PDF directly: View PDF PDF.
Page Count: 8

In today’s challenging world, having a
building that is safe and secure is essential.
SAFLOKTM, a global leader in developing and
manufacturing state-of-the-art access management
solutions, offers a full range of door hardware and
exit devices designed for securing high-traffic
access areas anywhere around the property.
Exit Device Hardware
SAFLOKTM offers a series of exit device hardware that is compatible
with mechanical and electrical applications. This hardware is
manufactured for the most demanding access/egress applications.
Vertical Rod Exit Device: The Advantex 20 series is a surface-
mounted vertical rod exit device with a modern touch bar design.
Rim Exit Device: The Advantex 10 series is a single-point rim
latch with a modern touch bar design.
SAFLOKTM Panic Bar Locks, Combining the
Best Features – Inside and Out
• Easy-to-install mechanical interface eliminates
the need for an electrician
• No wires running through the door, frame,
or hinges
• Self-contained battery allows up to 60,000 entries
• ANSI Grade 1 rating
• Auditable entries
• Auto latch/unlatch feature makes manual
dogging unnecessary
• UL fire rated (optional)
SAFLOK electronic locks are compatible with most exit control devices.
Contact your local sales representative for details.
SAFLOKTM Offers
Premium Security
1
MT™ trim
Advantex 10 Series Rim Exit Device
Advantex 20 Series Vertical Rod Exit Device
2
Exit Device Hardware
Remote Control Unit
QuantumTM RFID RCU
Hand: Non-handed
Stock: 36” door width (standard);
48” door width available at an upcharge
Door types: Wood, hollow metal,
fiberglass, or aluminum
Door requirements:
Fits standard 1-3/4” - 2-1/4” doors
Mounting height:
40” above finished floor
Stile width:
4-5/8” with standard 99 strike
4-1/8” with optional 98 strike
Latch bolts: Stainless steel
dead-locking; Pullman-type top latch
Voltage: 12-24 AC/DC
Outside dimensions:
4.56” W x 4.50” H x
0.75” D
Plate finishes:
Bright Brass
Bright Chrome
Satin Brass
Satin Chrome
Dark Oxidized
• RCU switch works with electrified
locking devices
• Fits into double-gang, deep-back
switch box
• Controls electric locking devices
up to 24 volts AC/DC
• Auto latch/unlatch feature
eliminates need for manual
dogging in System 6000TM
• Latch/unlatch keys accepted in
both System 6000TM and DeskLincTM
• SPDT 5A@30VDC relay with
common, normally open and
normally closed contact
• RCU switch works with electrified
locking devices
• Fits into double-gang switch box
• Controls electric locking devices
up to 24 volts AC/DC
• Auto latch/unlatch feature eliminates
need for manual dogging
• SPDT 5A@30VDC relay with
common, normally open and
normally closed contact
Voltage: 12-24 AC/DC
Outside dimensions:
4.65”W x 4.59”H
Finishes:
Dark Mahogany
Satin Brass PVD
Satin Stainless
MT™
Available finishes*:
Bright Brass
Satin Brass
Bright Stainless Steel
Satin Stainless Steel
Other panic bar
options available.
Available locks:
• Optional rain hood
• MessengerTM option requires
plastic box
MT™ RFID
*Check availability of finish for corresponding lock.
äd se™
SAFLOK RT™
The electric strike is designed to release
the door-locking mechanism when electrical
power is applied. It works with mortise, rim,
and cylindrical locks. Different models and
sizes are available depending on the
application. All models are fail-secure.
Holding force: 1,000 lbs.
Voltage: 24 VDC 1.5A
Size: 4 -7/8”, 7”, or 11”
Available finishes: Satin Stainless and Dark Oxidized
Motion Detector
When approaching the door
the motion detector will automati-
cally unlock, allowing entry.
The unit’s sensitivity
is adjustable.
Input power: 12 or 24 VDC or VAC (field-selectable)
35 mA @ 12 VDC, 38 mA @ 24 VDC
38 mA avg. @ 12 VAC, 45 mA avg. @ 24 VAC
Relay: Two Form “C” contact sets rated 1.0 amp
@ 30 VDC maximum for DC-resistive loads
Temperature range: -20º to +120º F (-29º to +49º C).
For UL-certified installations, the temperature range is
32º to 120º F (0º to 49º C.)
Refer to installation guide.
Enclosure:
6-1/4” W x 1-1/2” H x 1-1/2” D
(158mm x 38mm x 38mm)
Electro-magnetic Lock
3
SAFLOKTM offers an electro-magnetic locking device for perimeter doors. This
locking unit provides over 1,200 pounds of locking force when activated. It is
available in single- or double-magnet configurations.
Voltage: 12 or 24 VDC (field-selectable)
Magnet size: 8-13/16” W x 2 -13/16” H x 1-9/16” D
(225mm x 56mm x 40mm)
Armature size: 9” W x 2-1/4” H x 1/2” D
(230mm x 57mm x 14mm)
Holding force: 1,200 lbs.
Available finishes: Satin Aluminum and Dark Mahogany
Adams Rite 8800 Series
Sizes: 36” standard, (also 30”, 42”, and 48”)
Door requirements: 1-3/4” standard, up to 2-1/4”
Mounting height: 40-1/4” from CL to finished floor
Minimum stile: 2”
Available finish: Satin Aluminum and Dark Mahogany
Narrow Stile
Electric Strike
The narrow stile is
designed to retract when
electrical power is applied.
Exit Button
The exit button is a palm-sized button
designed to deactivate electronic lock-
ing devices. It is used for manual egress
and works in conjunction with other
types of entry/exit devices.
Touch Bar Exit Device
The touch bar exit device is ideally suited to allow manual
egress of electro-magnetic locks, remote alarms, and other
security devices. The touch bar comes in a kit, which includes
the touch bar, a wire loop and pull handle. See application
diagrams on pages 5 and 6.
SPDT rated: 5A, 250 VAC
Available finishes:
Satin Aluminum and
Dark Mahogany
Intercom
The intercom system allows communication with anyone trying to gain entry
through the perimeter doors. It comes with an intercom base, speaker with call
button, and a power supply. It also allows remote entry depending on perimeter
hardware currently in use.
Power source: AC 12 – 16V or DC 12 – 24V
Consumption: Max. 4W (AC 16V), Max. 200 mA (DC 24V)
Calling:
Electronic continuous tone (from door to master)
Electronic continuous tone or voice (from master to door)
Output: 100 mW
Wiring: Two non-polarized wires and two wires for door release
Contact capacity for door release:
Max. AC 30V, 1A, Max. DC 30V, 1A
Distance: 390´ (24 AWG), 650´ (22 AWG), 980´ (20 AWG),
1,570´ (18 AWG), 2,360´ ( 16 AWG)
Dimensions: 5-1/2” W x 7” H x 2-1/4” D
(143mm x 180mm x 55mm)
Pull
handle
Wire loop
Touch bar
4
Magnetic locks with motion
sensor and exit button
KIT COMPONENTS:
•
One power supply
•
Two magnetic locks
•
Exit button (inside)
•
Motion sensor (inside)
•
Remote control unit (outside)
•
Tubular pull handles (outside)
Suggested Applications
5
Active Double Doors
Magnetic locks with touch bars
KIT COMPONENTS:
• One power supply
• Two magnetic locks
• Two touch bars (inside)
• Remote control unit (outside)
• Tubular pull handles (outside)
Double Doors with One Active
Magnetic locks with touch bar
KIT COMPONENTS:
• One power supply
• One magnetic lock
• One touch bar (inside)
• Remote control unit (outside)
• Tubular pull handle (outside)
Magnetic locks with motion
sensor and exit button
KIT COMPONENTS:
•
One power supply
•
One magnetic lock
•
Exit button (inside)
•
Motion sensor (inside)
•
Remote control unit (outside)
•
Tubular pull handle (outside)
COMPONENTS:
•
One power supply
•
One magnetic lock
•
Exit button (inside)
•
Motion sensor (inside)
•
Remote control unit
(outside)
6
Single Door Magnetic Locks with Different Egress Devices
Rim Exit Device
Vertical Rod Exit Device
Magnetic lock with
motion sensor and
exit button
Magnetic lock
with touch bar
Electric strike
COMPONENTS:
•
One power supply
•
One magnetic lock
•
One touch bar (inside)
•
Remote control unit
(outside)
•
Tubular pull handle
(outside)
COMPONENTS:
•
One transformer
•
One electric strike
•
Remote control unit
(outside)
KIT COMPONENTS:
•
Mounting plate
•
Mounting hardware
•
SAFLOKTM rim panic lock
KIT COMPONENTS:
•
Mounting plate
•
Mounting hardware
•
SAFLOKTM vertical rod
panic lock
COMPONENTS:
•
One power supply
•
One electrified panic bar
(inside)
•
Remote control unit
(outside)
•
Tubular pull handle (outside)
•
Door loop
Narrow stile
Elevator Control
SAFLOK™ offers an elevator control unit (ECU)
and a multi-channel elevator control unit
(MCECU). The standard elevator control unit
uses a single relay that will control access to
certain floors.
The MCECU’s most distinctive feature is that
it enables up to 12 pass levels (secure stops),
while a standard RCU and ECU can only be
programmed to permit a single pass level. The
MCECU card reader can be installed on each
elevator and is connected to a box containing
a processor circuit with up to 12 relays on it.
When a card having one or more pass levels
on it is read, the appropriate relay(s) will switch to allow recognition
of the floor buttons that each one controls.
All this translates into greater access control. Keycards can be
encoded to grant access to only one of the controlled floors, all the
controlled floors, or any combination in between the 12 passes.
MCECU Control Room Option
While standard serial communication is generally limited to a
distance of 15 feet, the control room option allows the controls to
be placed in a separate elevator control room, not the car itself. To
communicate between the control room and the elevator car, the
device converts serial TTL communication to RS422 communication.
The property is responsible for supplying and installing the cable.
Expanded Pass Option
For properties that require more than the standard 12-pass levels
(secure stops) with the MCECU, the expanded pass option is ex-
pandable up to 256 new elevator pass levels for a given site. Each
new MCECU panel has 16 pass options, and multiple panels that
can be used together. This feature is available with the
Quantum™ RFID ECU only.
KAA1234 0510
www.kabamultihousing.com by Kaba
Americas
800-849-8324
Europe—Middle East—Africa
00.32.3.766.00.20
Asia
021.5868.1481
Disclaimer: While reasonable efforts were made to ensure the accuracy of this docu-
ment at the time of printing, Kaba assumes no liability for any errors or omissions. This
information is subject to be revised without notice, and changes may be incorporated in
future releases.

Navigation menu