Kaba PKG 1799E(b) 0609 Simplex 1000 Standard D2 PKG1799B
Simplex L1000 Standard - D2 PKG1799EB simplex-l1000-standard--d2-pkg1799eb Simplex L1000 Mechanical Lock - Kaba Access & Data Systems
User Manual: Kaba Simplex 1000 Standard - D2 PKG1799B Simplex 1000 Mechanical Lock - Kaba Access & Data Systems
Open the PDF directly: View PDF 
.
Page Count: 1
LEFT HAND
NOTE: Lock will accomodate doors 13/8" (35mm)
to 21/4" (57mm) thick. Suitable reinforcement
shall be provided by the hollow metal door
manufacturer to prevent collapsing of door.
When door silencers are to be installed, proper
allowances must be made for strike location.
CAUTION : MARK ACCURATELY - BORE STRAIGHT
THIS FLAP FOLDS OVER THE EDGE OF THE DOOR
BE SURE THE FOLD IS EXACTLY ON THE LINE
THIS FLAP FOLDS OVER THE EDGE OF THE DOOR
BE SURE THE FOLD IS EXACTLY ON THE LINE
INSERT LATCH, MARK AROUND
FACE PLATE OF LATCH, MORTISE
TO DEPTH REQUIRED
MARK CENTER
OF DOOR
THICKNESS
CROSS BORE
1" (25mm) DIAM.
LATCH HOLE
2 3/4"
(70mm)
5/32"
(4mm)
2 1/8"
(54mm) DIAM.
THROUGH BORE
2 3/4"
(70mm)
5/32"
(4mm)
TOP
BOTTOM
1 3/4"
(44mm)
1 3/8"
(35mm)
2"
(51mm)
1 1/2"
(38mm)
MARK CENTER
OF DOOR
THICKNESS
CROSS BORE
1" (25mm) DIA.
LATCH HOLE
1 3/4"
(44mm)
1 3/8"
(35mm)
2"
(51mm)
1 1/2"
(38mm)
CAUTION
APPLY TEMPLATE
AND DRILL FROM
OUTSIDE BUT
COMPENSATE FOR
DOOR BEVEL IF ANY. 2 3/4"
(70mm)
DOOR BEVEL
RIGHT HAND
STRIKE
LATCH CUTOUT
STRIKE BOX
1 13/16" (46mm)
1 1/8"
(29mm)
9/16"
(14mm)
11/16"
(17mm)
1 1/4"
(32mm)
2 3/4"
(70mm)
2 1/8"
(54mm)
1 1/2"
(38mm)
2 HOLES
8-32 FHMS
3/4"
(19mm)
1 5/8"
(41mm)
2 1/4"
(57mm)
1" (25mm)
DIAM.
1 1/8"
(29mm)
9/16"
(14mm)
1"
(25mm)
25/32"
(20mm)
1/16"
(1.6mm)
INSERT LATCH, MARK AROUND
FACE PLATE OF LATCH, MORTISE
TO DEPTH REQUIRED
TEMPLATE B
(with passage set)
TEMPLATE B
(with passage set)
13/16"
(21mm)
13/16"
(21mm)
1" DIAM.
(25mm)
2 HOLES
1/4" DIAM.
(6mm)
5 13/32"
(137mm)
2 1/4"
(57mm)
2 1/4"
(57mm)
1" DIAM.
(25mm)
3 9/16"
(90mm)
D2-PKG-1799E(b) 0609
FOR MODELS: 101x, 102x, 103x, 104x, L101x, L102x, L103x, L104x, L1076
THIS HOLE
FOR PASSAGE
MODELS ONLY
REFERENCE ONLY, NOT TO SCALE
DO NOT USE AS A DRILLING TEMPLATE
CALL 800-849-8324
