Kaba D2 PKG 1294(LH) 1 97 Simplex 7000 Installation PKG1294
User Manual: Kaba Simplex 7000 Installation - D2 PKG1294 Simplex 7100 Mechanical Lock - Kaba Access & Data Systems
Open the PDF directly: View PDF 
.
Page Count: 2
13/8" dia.
(35 mm)
1"
(25 mm)
1"
(25 mm)
3/32"
(2 mm)
Top
Bottom
CAUTION
Apply template and drill
from the inside but
compensate for door
bevel if any
11/4"
(32 mm)
11/2"
(38 mm)
21/4"
(57 mm)
17/8"
(48 mm)
3/4" dia.
(19 mm)
1/4" dia.*
(6 mm)
1/4" dia.*
(6 mm)
4 holes
1/8" (3 mm) dia.
3/4" (19 mm) deep
Holes must be drilled
from inside of door
3 3/4"
(95 mm)
1/4" dia.*
(6 mm)
23/8"
(60 mm)
FOR DOORS OPENING OUTWARD,
PLACE THIS FOLD LINE IN LINE WITH FACE OF DOOR JAMB
FOR DOORS OPENING INWARD,
PLACE THIS FOLD LINE OVER THE EDGE
BE SURE THE FOLD IS EXACTLY ON THE LINE
D2-PKG-1294 1/97
NOTE: Lock will accomodate doors
13/8" (35 mm) to 21/4" (57 mm) thick.
Suitable reinforcement shall be provided
by the hollow metal door manufacturer
to prevent collapsing of door. When
door silencers are to be installed,
proper allowances must be made for
strike location.
MARK ACCURATELY
BORE STRAIGHT
Place this template on the
INTERIOR SIDE OF THE DOOR
using the correct fold line for
door edge for door opening
inward or outward.
RIGHT HAND DOOR
7006
TEMPLATE
*IMPORTANT
Drill the four 1/4"
(6 mm) dia. holes
before all other holes.
23/8" (60 mm)
BACKSET
REFERENCE ONLY, NOT TO SCALE
DO NOT USE AS A DRILLING TEMPLATE
CALL 800-849-8324
13/8" dia.
(35 mm)
1"
(25 mm)
1"
(25 mm)
23/8" (60 mm)
BACKSET
3/32"
(2 mm)
Top
Bottom
CAUTION
Apply template and drill
from the inside but
compensate for door
bevel if any
11/4"
(32 mm)
11/2"
(38 mm)
21/4"
(57 mm)
17/8"
(48 mm)
3/4" dia.
(19 mm)
1/4" dia.*
(6 mm)
1/4" dia.*
(6 mm)
4 holes
1/8" (3 mm) dia.
3/4" (19 mm) deep
Holes must be drilled
from inside of door
3 3/4"
(95 mm)
1/4" dia.*
(6 mm)
23/8"
(60 mm)
FOR DOORS OPENING OUTWARD,
PLACE THIS FOLD LINE IN LINE WITH FACE OF DOOR JAMB
FOR DOORS OPENING INWARD,
PLACE THIS FOLD LINE OVER THE EDGE
BE SURE THE FOLD IS EXACTLY ON THE LINE
D2-PKG-1294 1/97
NOTE: Lock will accomodate doors
13/8" (35 mm) to 21/4" (57 mm) thick.
Suitable reinforcement shall be provided
by the hollow metal door manufacturer
to prevent collapsing of door. When
door silencers are to be installed,
proper allowances must be made for
strike location.
MARK ACCURATELY
BORE STRAIGHT
Place this template on the
INTERIOR SIDE OF THE DOOR
using the correct fold line for
door edge for door opening
inward or outward.
LEFT HAND DOOR
7006
TEMPLATE
*IMPORTANT
Drill the four 1/4"
(6 mm) dia. holes
before all other holes.
REFERENCE ONLY, NOT TO SCALE
DO NOT USE AS A DRILLING TEMPLATE
CALL 800-849-8324
