Kaba Simplex LP1000/8100 Changing The Code KAA1159 Lp1000 8100

User Manual: Kaba Simplex LP1000/8100 Changing the Code - KAA1159 Simplex LP1000 Exit Trim - Kaba Access & Data Systems

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadKaba Simplex LP1000/8100 Changing The Code - KAA1159 Simplex-lp1000-8100-changing-the-code-kaa1159
Open PDF In BrowserView PDF
Changing the Code/Combination
Simplex LP1000/8100
Note: If your lock is opening on every turn of the knob or lever, except upon entering a code, this may
be a ZERO CODE. Before attempting to remove the lock from the door, refer to the troubleshooting
procedures outlined at bottom of this document for a zero code symptom/solution.

LP1000/8100 Series FAQ
Changing the Code/Combination

For your security the combination must be changed when the lock is installed. The door must be open.
On models with passage feature, make sure the passage feature is disengaged:
turn knob or key should be in vertical position.
1.
		

Remove the tamper proof allen screw (A) using (B) tamper proof allen 		
wrench supplied with lock (see figure 1).

2.
		

Turn the outside lever once to the stop position then release
(see figure 3).

3.
		
		
		

Enter the existing combination. On new installations, enter the factory-		
set combination: depress buttons 2 and 4 simultaneously (release) , then
depress button 3 (release). You should feel a click as each button
is depressed.

4.
		

Insert the pick tool (C) as shown in figure 2. Gently depress pick tool in 		
hole (a slight click should be felt), then remove the pick tool.

5.
		
6.
		
		

Turn the outside lever once to the stop position then release
(see figure 3).
Select a new combination, write it down, then enter the new
combination—depress buttons carefully (a slight click should be felt as 		
each button is depressed)

Note: You can use one button or all five for a combination, but each button can
only be used once. You can press two or more buttons simultaneously as a step
in the combination.
7.
		
		
		

Turn the outside lever once, all the way until it stops, hold in position
and make sure the latch is retracted fully. Release the lever. Turn the
lever again to the stop position. At this point, the latch should not
retract unless you enter the new combination (see figure 3).

8.

Re-secure anti-tamper screw into housing (see figure 4).

Troubleshooting
Symptom/problem: Outside lever when turned always retracts latch without depressing
any buttons.
Cause: Lock is in zero combination.
Solution: Follow the procedure for changing a combination except omit step 3 (do not enter the
existing combination).

KAA1159 0108
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Instance ID                     : uuid:13facb66-c908-4fc1-8c4c-0bb3bfcce33d
Document ID                     : adobe:docid:indd:4c13b5d6-bf94-11dc-b625-b5eb45d47af5
Rendition Class                 : proof:pdf
Derived From Instance ID        : 3ca73886-bf88-11dc-b625-b5eb45d47af5
Derived From Document ID        : adobe:docid:indd:3ca73883-bf88-11dc-b625-b5eb45d47af5
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 300.00, 300.00, 300.00
Manifest Placed Y Resolution    : 300.00, 300.00, 300.00
Manifest Placed Resolution Unit : Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:83D17C26BF6D11DCB13DABE2189ABB81, uuid:A4E14EC1BF6B11DCB13DABE2189ABB81, uuid:93392198BF6B11DCB13DABE2189ABB81
Manifest Reference Document ID  : uuid:83D17C25BF6D11DCB13DABE2189ABB81, uuid:A4E14EC0BF6B11DCB13DABE2189ABB81, uuid:93392197BF6B11DCB13DABE2189ABB81
Create Date                     : 2008:01:11 11:40:25-05:00
Modify Date                     : 2008:08:18 15:11:18-04:00
Metadata Date                   : 2008:08:18 15:11:18-04:00
Creator Tool                    : Adobe InDesign CS3 (5.0.1)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 11935 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS3 (5.0.1)
EXIF Metadata provided by EXIF.tools

Navigation menu