Kamstrup A S READYAMR2 READy Converter User Manual OUY READYAMR2 Userman
Kamstrup A/S READy Converter OUY READYAMR2 Userman
Contents
- 1. OUY-READYAMR2 UserMan
- 2. OUY-READYAMR2 Userman
OUY-READYAMR2 Userman
User Guide READy Converter · Basic Kamstrup A/S · Industrivej 28, Stilling · DK-8660 Skanderborg · T: +45 89 93 10 00 · info@kamstrup.com · kamstrup.com READy Converter · Basic Contents Description What is in the box? Technical data Mechanical data Dimensions Power supply Markings/standards Safety information/disposal FCC Cautions 10 Order information 11 Accessories Kamstrup A/S • DRAFT - 55121763_A1_AU-NZ_12.2015 READy Converter · Basic 1 Description • Flexible converter unit for meter reading • Rugged design • Long battery lifetime • Support of Wireless M-Bus, Communication C mode • Support of Bluetooth® Part of READy Suite READy Converter, Basic is part of the READy Suite and is responsible for the automatic data collection from smart water meters equipped with Wireless M-Bus communication READy Suite is a unique standardized Wireless M-Bus solution for easy and fast reading of smart water meters. The reading of the smart water meters takes place using the READy Converter, Basic which receives data and sends this to a smartphone/tablet which is responsible for storing the data. Each device can contain data from up to 15,000 meters. The direct communication between the smart water meters and READy Converter, Basic is based on a comprised one-way communication protocol focusing on fast, safe and robust data communication and long battery lifetime. This comprised communication protocol is called C mode. Due to the optimized Wireless M-Bus communication protocol, READy Converter, Basic can receive data from up to 30 smart water meters per second, making it a perfect drive-by solution. Kamstrup A/S • DRAFT - 55121763_A1_AU-NZ_12.2015 READy Converter · Basic 2 What is in the box? READy Converter, Basic is delivered ready to use in a box containing: • 1 x READy Converter • 1 x whip antenna • 1 x 230 VAC/USB charger • 1 x USB car charger with 2 USB outputs • 1 x USB/micro USB cable • 1 x quick guide The intuitive quick guide leads you through the installation of the PC software and the smartphone app and shows you how to connect software, app and converter unit with each other. 3 Technical data Communication interfaces Meter reading Wireless M-Bus, C mode Data transfer to smartphone/tablet Bluetooth® 2.0 Further interfaces Charging Micro USB Optical interface 3 x LED for battery status User interface ON/OFF button Frequencies Wireless M-Bus 923 MHz Bluetooth (class 2, v2.1 EDR) 2.4 – 2.5 GHz Bluetooth (class 2, v2.1 EDR) 2.4 – 2.5 GHz Kamstrup A/S • DRAFT - 55121763_A1_AU-NZ_12.2015 READy Converter · Basic 4 Mechanical data LxWxD (in inches) 4.7” x 2.5” x .94” (without whip antenna) 10.8” x 2.5” x .94” (with whip antenna) Weight (incl. antenna) 5.6 oz IP protection class IP41 Antenna plug SMA (reversed polarity) Charging plug Micro USB Temperature range Charging 50 °F – 113 °F Operation -14 °F - +113 °F Storage 32 °F – 140 °F Humidity < 85 %, non-condensing 5 Dimensions READy Converter 155 6.1” Antenna 275 10.8” 3 x LED ON/OFF button 120 4.7” Label area 2.5” 65 .94” Kamstrup A/S • DRAFT - 55121763_A1_AU-NZ_12.2015 24 READy Converter · Basic 6 Power supply READy Converter 3.6 VDC internal, rechargeable battery Operation time (fully charged) < 8 hours Charging time (fully discharged) 9 hours Charging consumption 500 mW To function optimally, READy Converter, Basic must be fully charged at least once every half year. 230 VAC charger Output 5 VDC/1 A USB car charger Output 2 x 5 VDC/1 A Supported meter types flowIQ® 2100 flowIQ® 3101 7 Markings/standards AS/NZS 4268:2012 RoHS Bluetooth® certification, QDID BO2146, EPL registration 8 Safety information/disposal Do not try to disassemble READy Converter. Do not expose READy Converter to open fire. Please return READy Converter to Kamstrup A/S if the above specifications cannot be fulfilled. Kamstrup A/S • DRAFT - 55121763_A1_AU-NZ_12.2015 READy Converter · Basic 9 FCC Cautions Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC rules. Operation is subject to the following 2 conditions: 1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help. This equipment has been approved for portable operation, and unless otherwise advised in separate supplemental instructions for individual wireless transmitter(s), requires minimum 0.6” spacing be provided between antenna(s) and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. 10 Order information READy Converter Solution (complete) READyConverter I 11 Accessories Magnetic roof antenna with 118” antenna cable, complete Kamstrup A/S • DRAFT - 55121763_A1_AU-NZ_12.2015 6696 010 READy Converter · Basic Kamstrup A/S • DRAFT - 55121763_A1_AU-NZ_12.2015
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2015:12:14 07:06:37+01:00 Creator : Adobe InDesign CC 2015 (Windows) Modify Date : 2015:12:14 07:07:28+01:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.6-c015 81.157285, 2014/12/12-00:43:15 Metadata Date : 2015:12:14 07:07:28+01:00 Creator Tool : Adobe InDesign CC 2015 (Windows) Instance ID : uuid:b3d02adb-85f9-4a25-9c83-7673032f9232 Original Document ID : xmp.did:15fe0177-19d4-6b4a-8647-a5a116b8b09b Document ID : xmp.id:30526325-45d2-674d-8319-857fe0a83303 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:7275a5c8-6cf4-2648-8cd8-3f52b952186a Derived From Document ID : xmp.did:fb81dae2-d890-9b40-9c6e-ce29ca1311c7 Derived From Original Document ID: xmp.did:15fe0177-19d4-6b4a-8647-a5a116b8b09b Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2015 (Windows) History Changed : / History When : 2015:12:14 07:06:37+01:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Layout : TwoPageRight Page Mode : UseOutlines Page Count : 8 Signing Date : 2015:12:14 07:07:28+01:00 Signing Authority : ARE Acrobat Product v8.0 P23 0002337 Annotation Usage Rights : Create, Delete, Modify, Copy, Import, ExportEXIF Metadata provided by EXIF.tools