Kan Tsang Technology 9088-1 BLUETOOTH SPEAKER User Manual
Kan Tsang Technology Ltd BLUETOOTH SPEAKER
User Manual
KT TECH
KT TECHKT TECH
KT TECHTM
TMTM
TM
BLUETOOTH SPEAKERPHONEPHONEPHONE
USER MANUAL
KT-9088
PRODUCT FEATURES
The KT-9088 is a Bluetooth portable speakerphone with the following features:
• Wireless playback of music from your Bluetooth enabled mobile phone via the
Bluetooth connection
• Up to 33 feet (10 meters) line-of-sight operating distance
GETTING STARTED
ACCESSORIES INCLUDED
PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT
AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
1
Carefully remove the unit and all the accessories from the display carton. Please
verify that you have all the following accessories before recycling the gift box.
• User manual
• MICRO USB cable
• AUX-in cable
LOCATION OF CONTROLS
1. POWER/CHARGING/ BLUETOOTH STATUS INDICATOR (RED / BLUE)
2. ANSWER/ PLAY/STOP/PICK UP/HANG BUTTON
3. VOL+/- BUTTONS
4. NEXT/PREV BUTTONS
5. ON/OFF BUTTON
6. CHARGING JACK(MICRO USB)
7. AUX IN JACK
CHARGING INSTRUCTIONS
This unit operates on a built-in Li-ion battery that can be recharged either using the
USB port on your computer or from a USB power adaptor (not included) with a rated
output of DC 5V, 500mA and up.
Note: The Micro USB CHARGING JACK located on this unit is only designed for
charging the built- in Li-ion battery.
CHARGING THE BATTERY FOR FIRST TIME
1.) Charge the built-in Li-ion battery a minimum of 2.5 hours prior to first use.
Plug the unit into the USB port on your computer or into a USB power adaptor
(not included) using the included USB cable.
2.) The LED indicator will turn red while charging and turn-off automatically when the
unit is fully charged. Unplug the USB cable from the power source once the
battery is fully charged.
RECHARGING THE INTERNAL BATTERY
After prolonged use, the internal battery will become weak and the operation may
become intermittent. When the internal battery charge is very low, the Indicator LED
will flash red and a melody will play alerting you to recharge the internal battery as
soon as possible.
Plug the speakerphone into a USB port on your computer or into a DC 5V, 500mA
and up USB power adaptor (not included) using the included USB cable. Disconnect
the USB cable from the speakerphone as soon as it is fully charged.
Charging in Power ON mode
• The Indicator LED is RED while charging.
• The Indicator LED will turn-off automatically when the battery is fully
charged.
Note: 1. Charging time will vary if you are listening to music while charging the
2
internal battery. We recommend you switch off the speakerphone
power during the charging process.
2. To prolong the life of a rechargeable battery, it is recommended to
completely discharge it before fully charging it again.
3. Rechargeable batteries need to be cycled for maximum performance
and longer battery life. If you don’t use the player that often, be sure to
recharge the battery at least once a month in order to keep the
internal battery working properly.
Charging in Unit Power OFF mode
• The Indicator LED is RED while charging.
• The Indicator LED will turn-off automatically when the battery is fully
charged.
Battery Note and Care
Do not burn or bury batteries.
Do not puncture or crush.
Do not disassemble.
Li-ion batteries must be recycled. Do not dispose of in the trash.
Use only chargers rated for Li-ion cells. Be sure the charger’s voltage and
current settings are correct for the battery pack being charged.
Charge batteries on a fireproof surface and away from flammable items or
liquids.
Batteries should NEVER be left unattended while charging. Only adults should
charge the batteries.
Follow the manufacturer’s instructions for charging the product and do not
charge longer than recommended. Unplug the charger when the battery is
charged or not in use.
NOTE: The speakerphone is not magnetically shielded and may cause color
distortion on the screen of some TVs or video monitors. To avoid this, you may need
to move the unit further away from the TV or monitor if an unnatural color shifts or
image distortion occurs.
TURNING THE KT-9088 POWER ON/OFF
1. In standby mode, push the ON/OFF button to the left side until a beep sound is
heard to turn the unit ON, the Indicator LED will flash blue 3 times.
2. To turn the unit OFF, just push the ON/OFF button to the right side.Don’t forget to
turn off the Bluetooth feature on your cell phone.
SPEAKERPHONEPHONE OPERATIONS
PAIRING (LINKING) A BLUETOOTH ENABLED MOBILE PHONE OR OTHER
BLUETOOTH ENABLED DEVICE TO THE KT-9088
1. If the KT-9088 has never been paired with a Bluetooth device before. You need to
follow the pairing instructions below to link the KT-9088 with your Bluetooth device.
• In standby mode, push the ON/OFF button to the right side until a beep sound
is heard, the Indicator LED will alternately flash blue and red. The
speakerphone is ready to pair (link) with your Bluetooth device.
• Turn on the Bluetooth function of your cell phone and enable the search or
scan function to find the KT-9088.
• Select "KT-9088" from the device list when it appears on your device screen. If
required, enter the pass code “0000” to pair (link) the KT-9088 with your
mobile phone or Bluetooth device.
2. After turning on the KT-9088, the unit will search for the last paired device. The
POWER/CHARGING/BLUETOOTH STATUS INDICATOR will flash rapidly in blue.
3
If the unit finds the paired Bluetooth device, a beep is heard and the
POWER/CHARGING/ BLUETOOTH STATUS INDICATOR will begin flashing at a
slower rate.
Remarks:
• Fast flashing is when the LED lights up 3 times every second.
• Slow flashing is when the LED lights up 1 time every 8 seconds.
3. After successfully pairing (linking), you can begin playing music from your
Bluetooth device wirelessly to the speakerphone.
4. Press the Volume Up(+) / Down(-) button on your Bluetooth device to adjust to the
desired volume level. Or press the button “+” to increase the volume,a bee alert
sounds when volume reach maximum level ; Press the button “-” to decrease the
volume.
Notes:
1. Refer to manual of your mobile phones, tablet, PC, computer or other
Bluetooth enabled device for Bluetooth operation, since it may vary from model
to model.
2. Your Bluetooth enabled device will not play the music through the
speakerphone, even if connected (linked), if the device does not support A2DP
or AVRCP profile.
3. If you are pairing (linking) your computer to the KT-9088 using Bluetooth, you
may need to set the speakerphone as your computer’s default sound device.
4. If the KT-9088 is left idle for about 5 minutes without linking to any Bluetooth
enabled device, it will automatically turn off to save battery power.
Using the KT-9088 as a Handsfree Bluetooth Speakerphone.
1. Link your cell phone to the KT-9088 via Bluetooth as described above.
2. When receiving an incoming call on your cell phone, tap the ANSWER/
PLAY/STOP/PICK UP/HANG button on the speakerphone to switch the incoming
call from cell phone to the KT-9088 speakerphone. A short beep sound will be
heard confirming the call was answered. Complete your call using the built-in
microphone and speakerphone on the KT-9088.
3. Adjust the volume control of unit to obtain the desired sound level.
4. To end the call, just tap the ANSWER/ PLAY/STOP/PICK UP/HANG button again
on the KT-9088. A short beep sound will be heard and the call will end. If you were
playing music from your cell phone to the KT-9088 speakerphone before
answering the call, the music will automatically resume playing when you hang
up.
5. To ignore an incoming call, simply tap the ANSWER/ PLAY/STOP/PICK UP/HANG
button on the speakerphone for about 2-3 seconds, a beep sound will be heard
and the call will be ignored.
Hang up with the KT-9088
A quick press on the ANSWER/ PLAY/STOP/PICK UP/HANG button will end the call in
progress. A short beep tone will be heard from the speakerphone confirming the call has
ended.
Re-linking to the mobile phone
If your mobile phone is already paired (linked) with the speakerphone, but became
unlinked even with both Bluetooth devices turned on. You can re-link them by:
1. Turning off the speakerphone and then turning it on again to re-link your cell
phone. The POWER/CHARGING/ BLUETOOTH STATUS INDICATOR will flash
three times with two short beeps and them flash rapidly around 2 seconds if the
speakerphone and your cell phone have been re-linked successfully.
2. You can also re-link the speakerphone by using Bluetooth operation of your cell
phone. Please refer to operation manual of your cell phone for more information.
4
VOLUME CONTROL
Press the button “+” to increase the volume,a bee alert sounds when volume reach
maximum level ; Press the button “-” to decrease the volume.
PLAYING CONTROL
P
Pr
re
es
ss
s
t
th
he
e
b
bu
ut
tt
to
on
n
“
“N
Ne
ex
xt
t”
”
t
to
o
p
pl
la
ay
y
t
th
he
e
n
ne
ex
xt
t
s
so
on
ng
g;
;P
Pr
re
es
ss
s
t
th
he
e
b
bu
ut
tt
to
on
n”
”P
Pr
re
ev
v”
”
t
to
o
p
pl
la
ay
y
t
th
he
e
p
pr
re
ev
vi
io
ou
us
s
s
so
on
ng
g.
.
AUX in JACK
Connect any MP3 player by using 3.5 mm cable .(included)
TAP TO LINK WITH NFC
Instal the Android Apps provided to the NFC-equipped smartphone. Simply align the
NFC LOGO and tap for 1-2 seconds activate Bluetooth,pair the two devices and
stream your music.”Connect” in shown on the phone screen.Tap to disconnect the
two devices and the phone will show “Disconnect” in the screen.
CARE AND MAINTENANCE
1. Avoid operating your unit under direct sunlight or in hot, humid or dusty places.
2. Keep your unit away from heating appliances and sources of electrical noise such as
fluorescent lamps or motors.
CLEANING THE UNIT
• To prevent fire or shock hazard, disconnect your unit from the USB port of power source
when cleaning.
• The finish on the unit may be cleaned with a dust cloth and cared for as other furniture,
Use caution when cleaning and wiping the plastic parts.
• If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or
polish sprays on the cabinet.
• If the front panel becomes dirty or smudged with fingerprints it may be cleaned with a
soft cloth slightly dampened with a mild soap and water solution. Never use abrasive
cloths or polishes as these will damage the finish of your unit.
CAUTION: Never allow any water or other liquids to get inside the unit while
cleaning.
TROUBLESHOOTING GUIDE
Symptom
Possible Problem
Solution
No Charging
The USB power adaptor
(not included) is not
plugged into a wall outlet or
the USB cable (included) is
not plugged into the Micro
USB jack on the bottom of
the KT-9088.
Plug the USB power adaptor (not included)
into a wall outlet and plug the USB cable
(included) into the Micro USB jack on the the
KT-9088.
Wall outlet is not
functioning.
Plug another device into the same outlet to
confirm the outlet is working.
5
Computer USB port is not
functioning.
Make sure your computer power is turned on
and try another USB port.
No Sound
The KT-9088 battery is
dead. Recharge the KT-9088 battery.
The KT-9088 is not linked
with the mobile phone.
Go through “Speakerphone Operations”
process to link the speakerphone
The KT-9088 placement is
out of range.
Relocate the KT-9088 within Bluetooth
operating range (30 feet).
Volume set too low. Increase the volume of your device.
Sound is
distorted.
Volume level is set too high.
Decrease the volume of your device.
Sound source is distorted.
If the source sound file is of poor quality,
distortion and noise are easily noticed with
high-power speakerphone. Try a different
audio source such as a music CD.
Unit gets warm
after extended
play at high
volume.
This is normal. Turn the unit off for a period of time or lower
the volume.
SPECIFICATIONS
Power Requirement
Main unit Built-in DC 3.7V 1100mAh rechargeable Li-ion Battery
At KT Tech, environmental and social responsibility is a core value of our business.
We are dedicated to continuous implementation of responsible initiatives with an
aim to conserve and maintain the environment through responsible recycling.
Bluetooth® is a registered trademark of Bluetooth SIG, Inc
changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
.
Printed in China