Kangtai Electric 075 Remote control transmitter User Manual 3X50002X55002USAX18GAI
Kangtai Electric Co.,ltd Remote control transmitter 3X50002X55002USAX18GAI
User Manual
problems or other queries, please contact our Customer
Services.
Safety
•This product is suitable for switching products such as
•
•
1800 W.
•This product is intended for indoor use, do not expose it
to rain or moisture.
Operating instructions
Installation
6.
Tip:
•
A
be useful if you like switching several lights on at
•
controls or transmitters.
Switching on/off
2.
3.
Note:
Pressing the “master
Changing the batteries
1.
2.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
1. 2.
3.
start flashing slowly for
10 seconds.
in learning mode and
ready to be paired with
4. Single-press one of
control has been paired.
5.
hand “ON” row to switch
hand “OFF” row to switch
Deleting a paired remote control
•
control.
•
are occupied.
1.
Care and maintenance
•
•
Troubleshooting guide
switch set is
not working.
•
•
•
•
switched on and not faulty.
•
electrical outlet to make sure that
•
Specifications
Frequency 433.92 MHz
Receiver
Power supply
Max load 1800 W (resistive load)
6
Remote control
Battery
Number of channels 5
Master
120 6
Keep on press the
OFF button until the LED on the switch flash faster.
OFF” button according to step 3,all paired remote controls
will be deleted.
Push Master
button to turn linked receivers
all “ON” “OFF”.
A
B
C
D
Master
ON OFF
A
B
C
D
Master
ON OFF
MODEL：55002USAX18 + 50075
Caution:
This device complies with Part 15 of the FCC. Operation
is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device
must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that
to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.