Kano Computing 18G2000E Customised Pi3 User Manual

Kano Computing Limited Customised Pi3

a href="https://usermanual.wiki/Kano-Computing" itemprop="url"> Kano Computing >

User manual

KANO-RPI3-VE User Manual 2017.05 1. Product Introduction This product design is based on the Raspberry Pi 3 Model B V1.2 board, change USB hub chip, remove Ethernet function and RJ-45 connector, remove DSI and CSI connector according to client’s requirements. 2. Platform Architecture 2.1 Block Diagram and Description System Block Diagram System Description Referring to the Raspberry Pi 3 Model B V1.2 board, based on the Broadcom Quad Core SOC, use 5V/2.5A for system power supply via micro USB, use 1GB LPDDR2 for synchronous dynamic random access and 19.2MHz crystal for system clock, support HDMI and Audio output, support Bluetooth BLE4.0 and 802.11 b/g/n WLAN then communication via chip antenna, use USB2.0 hub to expanded 4 USB2.0 interfaces, reserved 40pin 2.54mm pin pitch for GPIOs. 2.2 Key Components Name Component Model CPU BCM2837 DDR2 MEMORY EDB8132B4PB WLAN and Bluetooth BCM43438
Download:
Mirror Download [FCC.gov]
Document ID3964879
Application IDFjUGoo8myMP6pyuI7EfLNg==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize51.14kB (639281 bits)
Date Submitted2018-08-15 00:00:00
Date Available2018-08-15 00:00:00
Creation Date2018-07-23 15:31:29
Producing SoftwareFoxit Reader PDF Printer Version 8.0.2.0718
Document Lastmod2018-07-23 15:31:29
Document TitleUser manual
FCC ID Filing: 2ACVK-18G2000E

Navigation menu