Karcher T 300 Users Manual 5961 208.p65
T 300 to the manual cff5ace4-4de9-431b-8b20-b04ede4b4990
2015-02-03
: Karcher Karcher-T-300-Users-Manual-472644 karcher-t-300-users-manual-472644 karcher pdf
Open the PDF directly: View PDF 
.
Page Count: 8
| Download | |
| Open PDF In Browser | View PDF |
T 300 T-Racer High Pressure Washer Accessory Part No. 2.640–508.0 Overview .............................................................. 1 Precautions ....................................................... 1-2 Assembly Instructions .......................................... 3 Operating Controls ............................................... 4 Normal Operating Settings .................................. 5 Parts List .............................................................. 6 In USA Call: 1-800-537-4129 or visit our website: www.karcher-usa.com 5.961–208.0 T-RACER OVERVIEW Item Description 1 Housing 2 Nozzle height adjustment 3 Hand grip 4 Air flow control (hovering effect) 5 Pressure nozzles (gray) from 1200 - 1600 PSI 6 Pressure nozzles (yellow) from 1700 - 2300 PSI 7 Cramp (2 piece) 8 Handle (2 piece) 2 In USA Call: 1-800-537-4129 or visit our website: www.karcher-usa.com IMPORTANT PRECAUTIONS – Read First! Safety Warnings Water Supply (Cold Water Only) When using this product, basic precautions should always be followed: • Water hose must be at least 3/4 inch in diameter. • Read all the instructions before using the product. • Flow rate of water supply must not fall below 2.5 GPM (gallons per minute). • High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, animals, electrical devices, or the machine itself. • Flow rate can be determined by running the water for one minute into an empty 5-gallon container. • Wear safety goggles. • Keep hands away from moving parts. • Do not use acids, alkalines, solvents, or any flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine. • The water supply temperature must not exceed 104°F/40°C. • Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc. • Always prevent debris from being drawn into the unit by using a clean water source. • Stay alert — watch what you are doing. • Do not operate the product when fatigued or under the influence of alcohol or drugs. • Do not stand on unstable surfaces. Stand with both feet balanced at all times. • The Gun Safety Lock PREVENTS the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the on position. CAUTION • Follow the maintenance instructions specified in the manual. • This machine has been designed for use with cleaning detergents supplied or recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty. • Keep hands away from moving parts. WARNING TO AVOID SERIOUS INJURY, NEVER POINT SPRAY NOZZLE AT YOURSELF, OTHER PERSONS OR ANIMALS. Never use: Please Note: • Bleach, Chlorine products and other corrosive chemicals • For optimum setting test the spray power in an unseen area. • Liquids containing solvents (i.e., paint thinners, gasoline, oils) • Never operate in the same area for more than 2 seconds, damage may occur. • Tri-sodium phosphate products • Do not use on windows. • Ammonia products • Acid-based products. These chemicals will harm the unit and will damage the surface being cleaned. 3 ASSEMBLY INSTRUCTIONS Step 1 Determine the PSI of your pressure washer. 1200–1600 PSI, Select the gray nozzles. 1700–2300 PSI, Select the yellow nozzles. GRAY 4 YELLOW Step 2 Insert the 2 matching pressure nozzles in the slots on the propeller and secure with cramp. Step 3 Insert upper handle into the lower handle by twisting together. Step 4 Insert lower handle into main housing. Push down and turn clockwise 90° to lock in lower handle. Step 5 Tighten Lock collar to assemble by twisting counter clockwise. Step 6 Insert pressure washer wand into upper handle. Push wand down over upper handle and twist clock-wise 1/4 turn into locked position. Step 7 Turn locking collar clockwise over pressure washer wand until tight. OPERATION CONTROLS Spray Power Adjust height of propeller spray head. Clockwise for wood surfaces counter clockwise for stone, concrete and tile. 5 Air Flow Control Adjust the hover effect of the T-Racer by pushing the Air Flow Control into one of the positions from 0 – 1. The lowest position is 0 and the highest position is 1. Please Note: • For optimum setting test the spray power in an unseen area. • Never operate in the same area for more than 2 seconds, damage may occur • Do not use on windows.. NORMAL OPERATION SETTINGS Horizontal Wood and Decks Adjust height of the spray head clockwise. Open (0) the air flow vents. 6 Vertical Wood, Siding and Facades Adjust height of the spray head clockwise. Close (1) the air flow vents. Do not use on windows. Horizontal Tile, Concrete and Stone Adjust height of the spray head counter clockwise. Open (0) the air flow vents. Vertical Tile, Concrete and Stone Adjust height of the spray head Counter clockwise. Close (1) the air flow vents. PARTS LIST 7 In USA Call: 1-800-537-4129 or visit our website: www.karcher-usa.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 8 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:fe0e1e3c-279a-405b-92c4-2b063e6a5724 Producer : Acrobat Distiller 6.0.1 (Windows) Creator Tool : PageMaker 6.5 Modify Date : 2004:06:01 19:36:56+02:00 Create Date : 2004:06:01 19:36:56+02:00 Document ID : uuid:bbbea41a-9abd-400e-ba86-0dd433acab95 Format : application/pdf Title : 5961-208.p65 Creator : AW02707 Author : AW02707EXIF Metadata provided by EXIF.tools