Kasda Networks KW6515 AC 1200Mbps Dual Band Wireless Router User Manual
Kasda Networks inc AC 1200Mbps Dual Band Wireless Router
User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3704430 |
| Application ID | M1dFTKT1ieYpwO/Z1/URMA== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 222.83kB (2785386 bits) |
| Date Submitted | 2018-01-07 00:00:00 |
| Date Available | 2018-01-07 00:00:00 |
| Creation Date | 2017-12-11 09:01:55 |
| Producing Software | Microsoft® Word 2010 |
| Document Lastmod | 2018-01-07 09:39:43 |
| Document Title | User manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | dell |
User Manual Default Login Details Login Address: www.mykasda.com Login Password: Set up by users Default Wi-Fi SSID: kasda xxxx KW6515 (Printed on product label) Default Wi-Fi Password: 12345678 www.kasdanet.com Rev: 2.0.0 2017031001 NOTICE This document contains proprietary information protected by copyright, and this Manual and all the accompanying hardware, software, and documentation are copyrighted. All rights are reserved. No part of this document may be photocopied or reproduced by mechanical, electronic, or other means in any form. The manufacturer does not warrant that the hardware will work properly in all environments and applications, and makes no warranty or representation, either expressed or implied, with respect to the quality, performance, merchantability, or fitness for a particular purpose of the software or documentation. The manufacturer reserves the right to make changes to the hardware, software, and documentation without obligation to notify any person or organization of the revision or change. All brand and product names are the trademarks of their respective owners. © Copyright 2017 All rights reserved. KW6515 LinkSmart Wireless Router User Manual Content 1 INTRODUCTION ............................................................................................................................... 1 1.1 M AIN FEATURES .................................................................................................................1 1.1.1 Wireless................................................................................................................................... 1 1.1.2 Network Protocol and Features .............................................................................................. 2 1.1.3 Firewall ................................................................................................................................... 2 1.1.4 Management Support ............................................................................................................. 2 1.1.5 Operating System Support ...................................................................................................... 3 1.1.6 Environmental ......................................................................................................................... 3 1.2 PACKET CONTENTS ........................................................................................................3 1.3 SYSTEM REQUIREMENTS ..................................................................................................3 1.4 FACTORY DEFAULTS .......................................................................................................3 1.5 WARNINGS AND CAUTIONS ..............................................................................................4 2 HARDWARE DESCRIPTION ............................................................................................................... 4 HARDWARE INSTALLATION ......................................................................................................... 6 PC CONFIGURATION GUIDE ........................................................................................................ 7 4.1 FOR WINDOWS 7 .................................................................................................................7 4.2 FOR WINDOWS 8 ................................................................................................................7 4.3 FOR WINDOWS XP ..............................................................................................................7 4.4 FOR M AC OS X ..................................................................................................................8 5 QUICK SETUP OF THE ROUTER ......................................................................................................... 8 6 WEB-BASED ADVANCE MANAGEMENT GUIDE .............................................................................. 16 APPENDIX: FREQUENT ASKED QUESTIONS .................................................................................... 27 1. POWER, HARDWARE CONNECTIONS, AND LEDS ..................................................................27 2. DEVICE ACCESS AND LOGIN ................................................................................................27 3. INTERNET ACCESS ..............................................................................................................28 1 Introduction Thank you for choosing our product. The KW6515 Wireless Router uses DD-WRT solution that fully complies with IEEE802.11b/g/n/ac standards. It will provide your SOHO with convenient Internet. 1.1 Main Features 1.1.1 Wireless Fully IEEE 802.11b /g /n & IEEE 802.11ac compatible KW6515 LinkSmart Wireless Router User Manual Wireless data rate up to 1200 Mbps Operating in the unlicensed 2.4 GHz &5GHz ISM band Supports 64/128 bits WEP, WPA, WPA2, WPA/WPA2-PSK, 802.1x 1.1.2 Network Protocol and Features Ethernet to modem Self-Learning Transparent Bridging IGMP Snooping v1/2 and IGMP Multicast IP Static Routing Routing Information Protocol (RIP, RIPv2) Network Address Translation (NAT) Port Forwarding, DMZ Support, UPnP (Universal Plug and Play) Virtual Server, Port Forwarding Dynamic Host Configuration Protocol (DHCP) DDNS Simple Network Time Protocol (SNTP) VPN pass-through (IPSec/PPTP/L2TP) 1.1.3 Firewall Built-in NAT MAC Filtering Packet Filtering Stateful Packet Inspection (SPI) Denial of Service Prevention (DoS) DMZ 1.1.4 Management Support Web Based GUI Upgrade or update via FTP/HTTP Command Line Interface via Telnet KW6515 LinkSmart Wireless Router User Manual Diagnostic Test Firmware upgrade-able for future feature enhancement Supports Remote Access Control 1.1.5 Operating System Support WINDOWS 98/SE/ME/2000/XP/VISTA/7/8/8.1/10 Macintosh LINUX 1.1.6 Environmental Operating humidity: 10%-90% non-condensing Non-operating storage humidity: 5%-95% non-condensing 1.2 Packet Contents The packet contents are as the following: Router x1 Power Adapter .x 1 Ethernet Cable x1 Quick Setup Guide x1 1.3 System Requirements Broadband Internet Access Service (modem/Ethernet) One Modem that has an RJ45 connector (which is not necessary if the Router is connected directly to the Ethernet) TCP/IP protocol on each PC Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari 1.4 Factory Defaults The device is configured with the following factory defaults: KW6515 LinkSmart Wireless Router User Manual Login Address: www.mykasda.com Login password: Set up by users Default Wi-Fi SSID: Kasda XXXX KW6515 Default Wi-Fi Password: 12345678 1.5 Warnings and Cautions Never use the product near water. To prevent dangerous overloading of the power circuit, be careful about the designed maximum power load ratings. Not to follow the rating guideline could result in a dangerous situation. 2 Hardware Description Front Panel LED Color Function KW6515 LinkSmart Wireless Router POWER Blue LAN Blue INTERNET Blue WPS Green WIFI Blue 2.4G/5G USB Blue User Manual OFF: Power Not Supplied On: Power Supplied On: LAN link established and active via LAN port Blinking: Data activity occurs Off: No LAN link via LAN port On: The WAN port has detected a link with an attached device Blinking: Data is being transmitted or received by the WAN port Off: No WAN link via the WAN port On: WPS connection is established Blinking: Trying to establish a WPS connection Off: WPS function is off or no WPS connection On: The 2.4GHz or 5GHz wireless module is ready and idle Blinking: Data transmitting or receiving over WLAN Off: The 2.4GHz or 5GHz wireless function is off On: USB connection is established Blinking: : Data transmitting or receiving over USB. Off: USB function is off or no USB connection Rear panel Port INTERNET Function Connect the device to a cable or modem KW6515 LinkSmart Wireless Router User Manual Connect the device to your PC's Ethernet port, or to Ethernet1,2,3,4 the uplink port on your hub/switch, using a RJ-45 cable RESET System reboot or reset to factory defaults WPS Turn on/off your WPS Power Connect to the supplied power adapter USB2.0 Connect to a printer or other storage device 3 Hardware Installation This chapter shows you how to connect Router. Meanwhile, it introduces the appropriate environment for the Router and installation instructions. 1. Using an Ethernet Cable to connect the WAN port of the ROUTER to a cable or modem. 2. Using an Ethernet Cable to connect the LAN port of the ROUTER to your LAN or a PC with network card installed. KW6515 LinkSmart Wireless Router User Manual 3. Connect the power cable to the PWR connector on ROUTER, then plug in the power adapter to the AC power outlet, and then press the on-off button. PC Configuration Guide 4.1 For windows 7 1. Click “Start -> Control Panel-> Network and Internet -> View networks status -> Change adapter settings” 2. Right-click Wireless Network Connection(or Local Area conncection), and then click Properties. 3. Select Internet Protocol Version 4 (TCP/IPv4), and then clcik Properties. 4. Select Obtain an IP address automatically and Obtain DNS Server address automatically. Then click OK. 4.2 For Windows 8 1. 2. 3. 4. Move your mouse to the lower right corner and click the Serch icon in the popus. Go to Apps, type Control Panel in the serche box and press enter. Go to “Control Panel ->l View networks status-> Change adapter settings” Right-click Ethernet,select Properties, then double-click internet protocol version 4( TCP/IPv4). 5. Select Otain an IP address automatically and Obtain DNS Server address automatically. Then click OK. 4.3 For windows XP 1. Click “Start” -> Control Panel -> Network and Internet Connection -> Network Connections” 2. Right-click Wireless Networks Connection (or Local Area Connection), and then click Properties. 3. Select Internet Protocol (TCP/IP), and then click Properties. KW6515 LinkSmart Wireless Router User Manual 4. Select Otain an IP address automatically and Obtain DNS Server address automatically. Then click OK. 4.4 For Mac OS X 1. Click the Apple icon on the upper left corner of the screen. 2. Go to System Preference -> Network. 3. Select Airport on the left menu bar, and then click Advanced for wireless configuration; or select Ethernet for wired configuration, 4. In the Configure IPv4 box under TCP/IP, select Using DHCP. 5. Click Apply to save the settings. 5 Quick Setup of the Router In order to use the web-based management software, it will be necessary to use a computer or mobile phone which occupies the same subnet as the Router. The simplest way to do this for many users will be to use DHCP server that is enabled by default on the Router. Please make sure the wan connection is ok. Setup Wizard will guide you through step-by-step process to configure your router and connect to the Internet. 5.1 Quick Setup of the Router via mobile phone 1. Connect your phone to router by using default WiFi network name and password, which are printed on product label at the bottom of the router. 2. Launch a browser on your phone to log in router with www.mykasda.com. Setup your initial login password and then click next button to continue. KW6515 LinkSmart Wireless Router User Manual 3. Select the WAN Mode KW6515 LinkSmart Wireless Router User Manual If you don’t need any Internet connection information, choose “DHCP”. If your ISP gives you a PPP username and password for you, choose “PPPoE” and type in the username and password. If you have a IP address to connect to the Internet, choose “Static IP” and type in the IP Address, IP Subnet Mask, Gateway IP Address and DNS Server. 10 KW6515 LinkSmart Wireless Router User Manual 4. Setup your 2.4GHz & 5GHz SSID and password. On the following page, you can rename the SSID and change password or just let it be default. The default password is 12345678, you can check it by clicking the eye button. 5. Click Save/Apply and wait for changes to be applied. 11 KW6515 LinkSmart Wireless Router User Manual When it blows up the following tips, then you can connect your wired or wireless devices to the Internet. Note: If you have changed your wireless network name and password, you must sign in with new SSID/password to regain access to the Internet. 5.2 Quick Setup of router via PC 1. Connect your PC to router wired or wirelessly. 2. Launch a browser, such as Internet Explorer or Chrome, and then use www.mykasda.com to log on the web management page. Here please setup your initial login password. Then click next button to continue. 12 KW6515 LinkSmart Wireless Router 3. User Manual Set up your WAN Mode If you don’t need any Internet connection information, choose “DHCP” as your WAN Mode. If your IPS gives you a PPP username and password, choose “PPPoE” as your WAN Mode and type in the username and password. 13 KW6515 LinkSmart Wireless Router User Manual If you have an IP address to connect to the Internet, please choose “Static IP” as your WAN Mode and type in the IP Address, IP Subnet Mask, Gateway IP Address and DNS Server. 4. Set up your 2.4GHz and 5GHz SSID and password. Keep it as default or rename the SSID and change the password as you like. 14 KW6515 LinkSmart Wireless Router User Manual 5. Click Save/Apply to continue and wait for the changes to be applied. After finish the Wizard Setup, you will enter the following page; here you can do a quick change to your WAN, WiFi and LAN. 15 KW6515 LinkSmart Wireless Router User Manual 6 Web-based Advance Management Guide This chapter will introduce how to configure your router advanced behind the advanced menu. There are four options: Status, System, Network and Logout. 6.1. Status Click “Status”, you will go to the device information page. The page displays the current status about Overview, Firewall, Routers, System Log, Kernel Log, Processes and Real time Graphs. 6.2. System Click “System”, you will go the system page. In this page, there are six options: System, Administration, Software, USB, Backup / Flash Firmware and Reboot. 16 KW6515 LinkSmart Wireless Router User Manual 6.2.1 System Here you can configure the basic aspects of your device like its hostname, time -zone, language and style. 6.2.2 Administration Click “Administration”, you will go to the Router Password page, and you can change the administrator password for accessing the device. 6.2.3 Backup / Flash Firmware Click “Backup / Flash Firmware”, you will go to the Flash operations page. On this page, you can do the backup or update the firmware version of routers. 17 KW6515 LinkSmart Wireless Router User Manual Generate archive is to download a tar archive of the current configuration files and save it for back up. You can save it onto another place such as your computer desktop. Perform reset is to reset the router’s firmware to its initial state. If you forget your router’s web management login password, you can reset the router by performing reset. Upload archive is to restore the configuration files by upload a previously generated backup archive here. Flash new firmware image is to upload or download a sys-upgrade compatible image here to replace the current running firmware. And if you want to retain the configuration before uploading or downloading, please check “Keep Settings”. As for how to flash new firmware image, you need to choose the firmware you want to flash, and then click Flash image to wait for the flash finished. During this period, please do not power off the router. 6.2.4 Reboot Click “Reboot”, you will go the following page. Here is for rebooting the operating system of your device by clicking “Perform reboot”. 18 KW6515 LinkSmart Wireless Router User Manual When you reboot your router, the Internet connection will be lost until the process finished. 6.3. Network 6.3.1 Interfaces Click “Interfaces”, you can see the following page about the router’s interfaces, such as WAN, WAN6, GUEST and LAN. On this page, you can overview the router’s interfaces status and do some modify actions to them, such as Connect, Stop, Edit and Delete. Interface—WAN Choose the WAN interface, and you will go to the common configuration such as General Setup, Advanced Settings, Physical Settings and Firewall Settings. 19 KW6515 LinkSmart Wireless Router User Manual Wan Connection Protocol 1. DHCP If you connect with a dynamic IP address or cable modem, keep the default: DHCP Protocol. 20 KW6515 LinkSmart Wireless Router User Manual 2. Static To use a fixed IP Address to connect the Internet, select Static Protocol. Then click switch protocol to type in the parameters your ISP provide. IPv4 Address – enter the IPv4 address provided by your ISP. It is a necessity to connect Internet. IPv4 netmask – enter the netmask provided by you ISP. It is a necessity to connect Internet. IPv4 gateway – enter the gateway IP address provided by your ISP. It is a necessity to connect Internet. Use custom DNS servers – enter the DNS (Domain Name System) server IP address provided by your ISP. If you have two or more DNS servers, you can click the add button behind to add. 3. PPPoE If you use PPPoE connection, select PPPoE as your WAN Protocol and click Switch Protocol to confirm. 21 KW6515 LinkSmart Wireless Router User Manual Username – enter the username provided by your ISP. It is a necessity to connect the Internet. Password – enter the password provided by your ISP. It is a necessity to connect the Internet. Access Concentrator – enter the Access Concentrator if required by your ISP. Service Name – enter the Service Name, if required by your ISP, or just leave it empty to autodetect. 22 KW6515 LinkSmart Wireless Router User Manual Interface – LAN IPv4 Address / Netmask: this is the router IP address and subnet mask as seen on the Internet LAN. The default value is 192.168.1.1 for IP address and 255.255.255.0 for netmask. Ignore interface – check it to disable the DHCP for this interface Start IP – lowest leased address as offset from network address Limit – enter the maximum number of PCs that you want the DHCP server to assign IP addresses to. The absolute maximum is 253, possible if 192.168.1.2 is your starting IP address. Lease time – enter the length of time, in minutes, that a DHCP client will be allowed to use a dynamic IP address. The default is 0 minute, which means one day. After this time is up, the client will be automatically assigned a new dynamic IP address, or the lease will be renewed. 23 KW6515 LinkSmart Wireless Router User Manual 6.3.2 WiFi Click “WiFi”, you will go to the wireless overview page. There are four wireless SSID by default: 2.4GHz, 5GHz and Guest for 2.4GHz&5GHz. On the overview page, you can disable/enable, edit and remove the WiFi SSID. Click the “Edit”, and you will go the page where you can modify the parameters. 24 KW6515 LinkSmart Wireless Router User Manual Radio on/off – when wireless clients survey the local area for wireless networks to associate with, they will detect the SSID radio by the router. To broadcast your router SSID, keep the default setting—on. If you do not want to broadcast the router SSID, then select off. Network Mode – keep it default as 802.11b/g/n. If you have special demand, you can select the mode as you like. Channel – this field determines which operating frequency will be used. It is not necessary to change the wireless channel unless you notice interference problems with another nearby access point. If you select auto, then router will choose the best channel automatically. Bandwidth – the bandwidth of the wireless channel. ESSID – it is the name of your wireless network. You can keep it default or rename it as you like. Mode – when you set up the wireless network via Wizard Setup, it is Client mode by default. Most customers choose “Access Point”. Network – Choose the network(s) you want to attach to this wireless interface or fill out the create field to define a new network. WMM Mode – keep it default “Enable”. APSDCapable – it is for power saving. Choose enable if you need or keep it default. 6.3.3 WPS You can start WPS (Wi-Fi Protected Setup) here by click the Enable button. 25 KW6515 LinkSmart Wireless Router User Manual 6.4 Logout Click here for logging out your router and it will go back to the login page. 26 KW6515 LinkSmart Wireless Router User Manual Appendix: Frequent Asked Questions This chapter offers some suggestions to solve problems you might encounter. The potential problems are divided into 3 categories: Power, Hardware Connections, and LEDs; Device Access and Login; Internet Access. 1. Power, Hardware Connections, and LEDs None of the LEDs are on when power on the router. Please make sure what you use is the power adaptor attached with the router package and checks the connection between the AC power and router. LAN LED does not turn on after connect Ethernet cable. Please make sure Ethernet cable is connected hub/PC and router correctly. Then please make sure the PC/hub have been power on. Please make sure that you use parallel network cable to connect UpLink port of hub, or use parallel network cable to connect PC. If connect normal port of hub (not UpLink port), you must use cross-cable. Please make sure that your network cables meet the networking requirements above. 2. Device Access and Login I forgot the password. 1. You have to reset the device to its factory defaults and set your initial login password and keep it in mind. I cannot see or access the Login screen in the web configurator. 1. Make sure you are using the correct IP address. The default login address is www.mykasda.com. If you changed the IP address, use the new IP address. If you changed the IP address and have forgotten it, see the Frequent Asked Questions for I forgot the IP address for the Router. Make sure you are using the correct IP address. 2. Check the hardware connections, and make sure the LEDs are behaving as expected. 3. Make sure your Internet browser does not block pop-up windows. 4. Make sure your computer is in the same subnet as the Router. If there is a DHCP server on your network, make sure your computer is using a dynamic IP address. If there is no DHCP server on your network, make sure your computer’s IP address is in the same subnet as the router. 5. Reset the device to its factory defaults and reboot it again. My PC is unable to connect to the wireless connection. Please make sure that all devices communicating with the device must use the same channel (and use the same SSID). Otherwise your PC will not find the wireless Router. 27 KW6515 LinkSmart Wireless Router User Manual 3. Internet Access My PC cannot access the Internet First check whether PC can ping the interface Ethernet IP address of this product successfully (default value is 192.168.1.1) by using ping application. If ping application fails, please check the connection of Ethernet cable and check whether the states of LEDs are in gear. If the PC uses private IP address that is set manually (non-registered legal IP address), please check: 1. Whether IP address of the PC gateway is legal IP address. Otherwise please use the right gateway, or set the PC to Obtain an IP address automatically. 2. Please confirm the validity of DNS server appointed to the PC with operator. Otherwise please use the right DNS, or set the PC to Obtain an IP address automatically. 3. Please make sure you have set the NAT rules and convert private IP address to legal IP address. IP address range of the PC that you specify should meet the setting range in NAT rules. 4. Central Office equipment may have problem. 5. The country or the wireless network type you selected is wrong. My PC cannot browse Internet web page. Please make sure DNS server appointed to the PC is correct. You can use ping application program to test whether the PC can connect to the DNS server of the operator. If the cause is not given above, please contact your local service provider! 28 KW6515 LinkSmart Wireless Router User Manual FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The distance between user and products should be no less than 20cm during normal operations. Indoor use only. 29
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Language : zh-CN XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : dell Create Date : 2017:12:11 09:01:55+08:00 Creator Tool : Microsoft® Word 2010 Modify Date : 2018:01:07 09:39:43-05:00 Metadata Date : 2018:01:07 09:39:43-05:00 Producer : Microsoft® Word 2010 Document ID : uuid:ec562cde-3399-44fd-9a44-5595275a54df Instance ID : uuid:e5133ac5-1e53-4174-abee-e7868f6f7c9a Page Count : 31 Author : dellEXIF Metadata provided by EXIF.tools