KatchAll Technology Group TT02 Base Station Transceiver to collect Temperature Da User Manual

Download:
Mirror Download [FCC.gov]
Document ID	99714
Application ID	3PtC2rrgOVhWkwhYtlSTmw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Microsoft Word - pdf
Filesize	3.28kB (40961 bits)
Date Submitted	2000-05-11 00:00:00
Date Available	2000-06-14 00:00:00
Creation Date	2000-05-11 21:14:28
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2000-05-11 21:14:30
Document Title	Users Manual

TempTrak
Commander
Wireless Data Base Station
Operating Instructions
Revision A
Katchall Technology Group
5800 Creek Road
Cincinnati, Ohio 45242
(800) 533-6900
TempTrak Commander Instruction Manual
Owner’s Record
The serial number for the TempTrak Commander unit is located on the bottom of the plastic case. Record
the serial number in the space provided below. Refer to this number whenever you call upon your Katchall
dealer regarding this product.
Serial Number: TTB______________TT
Important Safety Instructions
When using the Temptrak Commander unit, observe the following safety instructions:
1.
Read and understand all instructions.
2.
Unplug this product from the wall outlet before cleaning. Wipe with a damp cloth to clean. Avoid
getting moisture on the electronic connections.
3.
Do not submerge the product in a liquid. Damage to the electronics will occur. Enclose the device
in a watertight plastic container prior to placing the unit in a moist environment.
4.
Securely fasten the unit to a wall, shelf, etc. Failure to do so may result in the unit falling to the
ground, possibly damaging the product.
5.
This unit should only be powered via the plug-in power converter provided with the unit.
6.
Do not locate this unit where the power cord may become a tripping hazard.
7.
Do not disassemble the product. Contact your Katchall dealer if problems arise in the operation of
the unit.
Wireless Operation
The TempTrak Commander unit communicates to the other devices in the TempTrak system via radio
frequency (RF) energy. Careful placement of the unit is required to insure consistent RF communications
with other TempTrak devices. The following general considerations apply to placement of the TempTrak
Commander unit:
1.
In general, the TempTrak Commander unit will communicate with a TempTrak Sentry or Echo
units at ranges up to 150 feet. This range applies only to clear line-of-sight transmission in which
there are no physical obstructions between the TempTrak Commander unit and other TempTrak
devices. A simple way to insure line-of-sight transmission is to verify that you can physically see
one unit when standing at eye level with the other unit.
2.
The TempTrak Commander unit will communicate with other TempTrak devices through walls.
The range at which communication through a wall can be achieved is a function of the materials
from which the wall is constructed. Any solid metallic materials greater than 1 square foot in area
within the direct transmission path will block the RF transmissions. In general, the following rule
of thumb can be used for transmission ranges through interior walls (drywall construction is
assumed, actual performance will vary significantly due to differences in construction material and
their subsequent impact on RF transmission):
0 walls ! 150 feet
1 wall ! 75 feet
2 walls ! 50 feet
Katchall Technology Group
Revision A
TempTrak Commander Instruction Manual
3 walls ! 35 feet
4 walls ! 25 feet
5 walls ! 15 feet
3.
Do not place the TempTrak Commander unit near a cordless telephone base unit. Interference may
result.
4.
Operation of cordless phones and cell phones in near proximity to the TempTrak Commander unit
may result in interference.
Information To The User
NOTE: The TempTrak Commander unit has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Caution To User: changes or modifications to this equipment that are not expressly approved by the party
responsible for FCC compliance could void the user’s authority to operate this equipment.
System Operation
Please refer to the TempTrak system operations manual for detailed instructions on how to place and
integrate TempTrak Commander units into a fully operational TempTrak system.
Katchall Technology Group
Revision A

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : Yes
Create Date                     : 2000:05:11 21:14:28
Producer                        : Acrobat Distiller 4.0 for Windows
Modify Date                     : 2000:05:11 21:14:30-04:00
Page Count                      : 3

EXIF Metadata provided by EXIF.tools